1. Úvod
This manual provides essential information for the proper understanding, installation, operation, and maintenance of the Continental OE Technology Series 4060400 Multi-V Belt. Adherence to these instructions will help ensure optimal performance and longevity of the product.
2. Konec produktuview
The Continental OE Technology Series 4060400 is a 6-rib, 40.0-inch Multi-V belt, also known as a serpentine belt. It is engineered to match Original Equipment (OE) specifications for fit, form, and function in various domestic and import vehicles. The belt features a straight-ribbed construction, designed for improved durability and a quieter operation compared to previous designs. It is manufactured from quality certified materials, including polyester and rubber, and meets SAE specifications.
Figure 2.1: Continental OE Technology Series 4060400 Multi-V Belt in its packaging.
Figure 2.2: Detail of the straight-ribbed design for enhanced performance.
3. Instalace
Proper installation is critical for the performance and lifespan of the Multi-V belt. It is recommended that installation be performed by a qualified automotive technician or by following the specific service manual instructions for your vehicle model.
- Bezpečnost především: Ensure the vehicle is turned off, cooled down, and properly secured before beginning any work. Disconnect the battery to prevent accidental starting.
- Určení směrování řemene: Refer to your vehicle's service manual or the under-hood diagram for the correct belt routing path.
- Uvolněte napětí: Locate the tensioner pulley and use the appropriate tool to relieve tension on the old belt.
- Demontáž starého řemene: Carefully remove the old belt from all pulleys. Inspect pulleys for wear or damage.
- Instalace nového řemene: Route the new Continental 4060400 Multi-V Belt according to the diagram. Ensure the ribs align correctly with the grooves on all pulleys.
- Aplikujte napětí: Release the tensioner slowly to apply proper tension to the new belt.
- Ověřte zarovnání: Double-check that the belt is seated correctly on all pulleys and that there are no twists or misalignments.
- Testovací provoz: Reconnect the battery and start the engine. Listen for any unusual noises and observe the belt's operation.
Incorrect installation can lead to premature belt wear, noise, or system malfunction.
4. Principy fungování
The Multi-V belt transmits power from the engine's crankshaft to various peripheral components, such as the alternator, power steering pump, air conditioning compressor, and water pump. Its ribbed design provides increased surface contact with pulleys, allowing for efficient power transfer and reduced slippage. The OE Technology Series belt is designed to maintain consistent tension and operate quietly under varying engine loads and conditions.
Video 4.1: An informational video demonstrating the features and application of Continental OE Technology Series Multi V-Belts in an automotive system.
5. Údržba
Regular inspection and timely replacement are crucial for maintaining the performance of your vehicle's accessory drive system. Follow these maintenance guidelines:
- Vizuální kontrola: Periodically inspect the belt for signs of wear, such as cracks, fraying, glazing, missing ribs, or contamination (oil, grease).
- Kontrola napětí: Ensure the belt tension is correct. An overly tight belt can damage bearings, while a loose belt can slip and cause component malfunction.
- Interval výměny: Consult your vehicle's service manual for recommended belt replacement intervals. Generally, serpentine belts should be inspected every 15,000 miles and replaced every 50,000 to 100,000 miles, depending on vehicle manufacturer recommendations and operating conditions.
- Kontrola kladky: When replacing the belt, inspect all pulleys for proper alignment, wear, and free rotation. Replace any worn or damaged pulleys.
6. Řešení problémů
Common issues related to Multi-V belts and potential causes:
| Příznak | Možná příčina | Akce |
|---|---|---|
| Pištění nebo cvrlikání | Loose belt, worn tensioner, misaligned pulleys, contaminated belt surface. | Check tension, inspect tensioner and pulleys, clean belt, or replace if worn. |
| Cracks or Fraying on Belt | Normal wear and tear, excessive heat, improper tension, pulley misalignment. | Replace belt. Inspect system for underlying issues. |
| Glazed or Shiny Belt Surface | Slippage due to low tension, worn pulleys, or contamination. | Check tension, inspect pulleys, clean belt, or replace if severely glazed. |
| Loss of Accessory Function (e.g., no power steering, charging issues) | Belt breakage, severe slippage, or component failure. | Inspect belt for breakage. If intact, check tension and individual accessory components. |
If you experience any of these symptoms, it is advisable to have your vehicle inspected by a professional technician.
7. Specifikace
- Číslo modelu: 4060400
- Styl opasku: Serpentine Belt (Multi-V)
- Number of Ribs: 6
- Délka: 40.0 palců
- Materiál: Polyester, Guma
- Hmotnost položky: Přibližně 3.84 unce (0.11 kilogramu)
- Rozměry produktu: 16 x 6 x 1 cm (obal)
- Výrobce: Continental ContiTech
- Dodržování: Meets SAE specifications
8. Záruka a podpora
For information regarding product warranty, returns, or technical support, please refer to the official Continental website or contact your authorized Continental dealer. Keep your purchase receipt as proof of purchase.
