Návod k obsluze pro 8palcové třípásmové reproduktory do zdi řady Acoustech.

Zavedení

This manual provides comprehensive instructions for the installation, operation, and maintenance of your BIC America HT8W 8-Inch 3-Way Acoustech Series In-Wall Speakers. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Bezpečnostní pokyny

• Ensure power to the installation area is disconnected before beginning any wiring or installation.
• Consult a qualified electrician or installer if you are unsure about any part of the installation process.
• Nevystavujte reproduktory nadměrné vlhkosti ani extrémním teplotám.
• Use appropriate wiring gauges as recommended for audio equipment to prevent overheating and ensure proper signal transmission.
• Neumísťujte reproduktory do blízkosti zdrojů tepla nebo na přímé sluneční světlo.
• Uchovávejte obalové materiály mimo dosah dětí, abyste předešli nebezpečí udušení.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• BIC America HT8W 8" 3-way Acoustech Series In-Wall Speakers (1 Pair)
• Mounting brackets (pre-attached or included separately)
• Removable speaker grilles
• Návod k použití (tento dokument)

Konec produktuview

The BIC America HT8W speakers are designed for in-wall installation, offering a 3-way sound reproduction system. Key components include:

• 8-inch Poly Graphite Woofer: Provides robust low-frequency response.
• 2.5-inch Volume-adjustable Poly Midrange: Poskytuje jasné a detailní střední frekvence.
• 1-inch Volume-adjustable Pivoting Titanium Tweeter: Produces crisp high frequencies and can be aimed for optimal sound dispersion.
• Self-resetting Thermal Cut-offs: Protect the speakers from overload.

Image: The BIC America HT8W In-Wall Speaker. On the left, the speaker is shown with its grille removed, revealing the 8-inch poly graphite woofer, the 2.5-inch poly midrange, and the 1-inch pivoting titanium tweeter. Adjustment knobs for tweeter and midrange levels are visible. On the right, the speaker is shown with its white metal grille attached, presenting a clean, flush appearance for in-wall installation.

Nastavení a instalace

1. Planning Your Installation

• Umístění: Choose a suitable location in your wall, ensuring no obstructions like studs, electrical wiring, or plumbing. Use a stud finder to locate studs.
• Odbavení: Ensure sufficient depth behind the wall for the speaker enclosure.
• Zapojení: Plan your speaker wire routing from your amplifier/receiver to the speaker locations.
• Rough-in Kits: For pre-construction, optional M-8R rough-in kits are available (sold separately) to simplify installation.

2. Řezání otvoru

1. Carefully trace the speaker cutout template (usually provided with the speaker or found in a separate template kit) onto the wall.
2. Pomocí pilky na sádrokarton nebo užitkového nože opatrně řežte podél vyznačené linie.

3. Zapojení reproduktoru

1. Run speaker wire through the wall to the cutout opening.
2. Odstraňte přibližně 1,2 cm izolace z konců reproduktorových vodičů.
3. Připojte kladný (+) pól reproduktoru ke kladnému (+) pólu vašeho amplifier/receiver, and the negative (-) terminal of the speaker to the negative (-) terminal of your amplifier/receiver. Ensure correct polarity for all speakers in your system.

4. Montáž reproduktoru

1. Insert the speaker assembly into the wall opening.
2. Tighten the mounting screws located on the front baffle of the speaker. These screws activate the metal mounting brackets that pivot out and clamp onto the drywall.
3. Důležitá poznámka: Tighten screws firmly but avoid over-tightening, which can warp the speaker frame or damage the wall. Ensure the speaker is flush and secure.

5. Připevnění mřížky

The speaker grilles are designed to fit snugly. Gently press the grille into place until it is flush with the wall. If the grille rattles at high volumes, ensure the speaker is securely mounted and consider adding a thin strip of foam tape around the speaker frame before attaching the grille to improve the fit and reduce vibration.

Návod k obsluze

1. Počáteční zapnutí

Once installed and wired, connect your amplifier/receiver to a power source and turn it on. Start with the volume at a low level and gradually increase it.

2. Adjusting Tweeter and Midrange Levels

The HT8W speakers feature volume-adjustable tweeter and midrange controls on the front baffle (visible when the grille is removed). These controls allow you to fine-tune the sound to your listening environment and personal preference.

• Nastavení výškového reproduktoru: Rotate the tweeter control to increase or decrease high-frequency output. This is useful for brightening or softening the sound.
• Nastavení středního rozsahu: Rotate the midrange control to adjust the clarity and presence of vocals and instruments.
• Otočný výškový reproduktor: The 1-inch titanium tweeter can be gently pivoted to aim the high frequencies towards your primary listening area, optimizing sound dispersion.

Experiment with these settings while listening to various types of audio to find the ideal balance for your room.

3. Systémová integrace

For optimal performance in a surround sound setup, consider integrating a subwoofer to handle very low frequencies, as in-wall speakers excel in mid-range and high-frequency reproduction.

Údržba

• Čištění: Dust the speaker grilles periodically with a soft, dry cloth. For stubborn dirt, a slightly damp Lze použít hadřík, ale dbejte na to, aby se do součástí reproduktoru nedostala vlhkost.
• Malování mřížky: The grilles can be painted to match your wall color. Use a thin coat of spray paint and ensure the paint does not clog the grille perforations, which could affect sound quality. Allow to dry completely before reattaching.
• Inspekce: Periodically check the mounting screws to ensure they remain secure.

Odstraňování problémů

Specifikace

Záruka a podpora

BIC America HT8W speakers come with a 7letá záruka na díly a práci. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact BIC America customer service. Keep your proof of purchase for warranty validation.

For further assistance, visit the official BIC America webwebu nebo kontaktujte jejich kanály podpory.