Uživatelská příručka k úhlové brusce Chicago Pneumatics CP875 s úhlem 90 stupňů

1. Úvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Chicago Pneumatics CP875 90 Degree Angled Die Grinder. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

The CP875 series is engineered for general maintenance tasks, particularly in confined spaces. It features an integrated pneumatic regulator and delivers 0.3 horsepower (220 W) for high-speed grinding applications. Its compact and lightweight design ensures exceptional maneuverability.

Klíčové vlastnosti:

• Rychlost a výkon: Delivers 0.3 HP / 220 W with a maximum speed of 22500 RPM, ensuring efficient grinding and polishing for quick task completion.
• Ergonomie: Lightweight and compact 90 Degree angle head design with a comfortable grip, reducing user fatigue and allowing for extended use without discomfort in tight areas.
• Bezpečnost: Features a built-in safety throttle lever to prevent accidental start-ups, providing peace of mind and enhanced user protection.
• Aplikace: Ideal for grinding, polishing, porting, and deburring, making it perfect for automotive, metalworking, and DIY projects.
• Obecné specifikace: 1/4 inch (6 mm) collet, 0.3 HP / 220 W motor, 22500 RPM, rear exhaust, durable aluminum housing for long-lasting performance.

2. Bezpečnostní informace

Vždy dodržujte základní bezpečnostní opatření, abyste snížili riziko požáru, úrazu elektrickým proudem a zranění osob při používání elektrického nářadí. Před použitím tohoto výrobku si přečtěte všechny pokyny.

Obecné bezpečnostní pokyny:

• Osobní ochranné prostředky (OOP): Always wear appropriate eye protection (safety glasses or goggles), hearing protection, and gloves when operating the die grinder.
• Pracovní oblast: Keep your work area clean, well-lit, and free of clutter. Ensure adequate ventilation, especially when grinding materials that produce dust or fumes.
• Stav nástroje: Before each use, inspect the tool for any damage, loose parts, or wear. Do not operate a damaged tool.
• Přívod vzduchu: Ensure the air supply is clean, dry, and at the correct pressure (refer to Specifications section). Disconnect the air supply before changing accessories, performing maintenance, or when the tool is not in use.
• Příslušenství: Use only accessories designed for die grinders and ensure they are rated for the tool's maximum RPM. Securely fasten all accessories before operation.
• Stabilita: Maintain a firm grip on the tool and ensure stable footing during operation.
• Safety Throttle Lever: The CP875 features a built-in safety throttle lever. This mechanism prevents accidental start-ups. Always engage the safety before connecting to air or when handling the tool.

Obrázek 2.1: Strana view of the CP875 die grinder, highlighting the warning label regarding safe operation and the safety throttle lever.

3. Obsah balení

Po otevření balení zkontrolujte, zda jsou všechny součásti přítomny a nepoškozené. Pokud některé položky chybí nebo jsou poškozeny, ihned kontaktujte svého dodavatele.

• Chicago Pneumatics CP875 Air Angle Die Grinder
• Wrench Spanner

4. Vlastnosti a komponenty produktu

Familiarize yourself with the various parts and features of your CP875 die grinder for optimal use and maintenance.

Obrázek 4.1: Přesview of the Chicago Pneumatics CP875 90 Degree Angled Die Grinder.

Figure 4.2: Key performance features of the CP875, including its power output, maximum rotational speed, and the integrated safety throttle lever.

Figure 4.3: Physical specifications of the CP875, detailing its length, weight, and the included collet sizes (1/4 inch and 6 mm).

5. Nastavení

5.1 Připojení přívodu vzduchu

1. Ensure your air compressor is capable of providing the required air pressure and volume (refer to Specifications).
2. Install an air filter/regulator/lubricator (FRL) unit in your air line, as this is crucial for the longevity and performance of pneumatic tools.
3. Connect a suitable air hose (minimum 3/8 inch I.D. recommended) to the tool's air inlet. Use thread sealant tape on all threaded connections to prevent air leaks.
4. Set the air pressure at the regulator to the recommended operating pressure (typically 90 PSI / 6.2 Bar).
5. Before connecting the tool, ensure the safety throttle lever is engaged to prevent accidental start-up.

5.2 Instalace příslušenství

1. Disconnect the tool from the air supply before installing or changing accessories.
2. Insert the shank of the grinding bit or accessory into the collet.
3. Using the provided wrench spanner, tighten the collet nut securely. Ensure the accessory is firmly seated and centered to prevent vibration and potential injury.
4. Never operate the tool with a loose or improperly installed accessory.

6. Návod k obsluze

6.1 Spuštění a zastavení nástroje

1. Zajistěte dodržování všech bezpečnostních opatření a používání OOPP.
2. Připojte nářadí k přívodu vzduchu.
3. To start the tool, disengage the safety throttle lever and depress the trigger.
4. To stop the tool, release the trigger and engage the safety throttle lever.
5. Always disconnect the air supply when finished with the tool or before any adjustments.

6.2 Grinding and Polishing

The CP875 is ideal for a variety of applications including grinding, polishing, porting, and deburring in automotive, metalworking, and DIY projects.

• Apply light, even pressure to the workpiece. Avoid excessive force, which can reduce tool life and accessory performance.
• Move the tool smoothly across the surface to achieve a consistent finish.
• For optimal results, use the appropriate grinding or polishing accessory for the material and task.

Figure 6.1: The CP875 die grinder in action, demonstrating its use in metalworking applications.

7. Údržba

Regular maintenance ensures the longevity and optimal performance of your CP875 die grinder.

7.1 Denní údržba

• Mazání: Add a few drops of pneumatic tool oil into the air inlet before and after each use, or if the tool has been stored for an extended period. This lubricates internal components.
• Čistota: Wipe down the tool with a clean cloth to remove dust and debris. Keep the air inlet free from obstructions.

7.2 Pravidelná údržba

• Vzduchový filtr: Regularly check and clean or replace the air filter in your FRL unit to ensure a clean air supply to the tool.
• Kontrola kleštin: Inspect the collet and collet nut for wear or damage. Replace if necessary to ensure proper accessory retention.
• Vzduchová hadice: Check the air hose for kinks, cuts, or leaks. Replace damaged hoses immediately.

For any complex repairs or internal servicing, it is recommended to contact an authorized service center.

8. Řešení problémů

This section addresses common issues you might encounter with your CP875 die grinder. For problems not listed here, contact customer support.

9. Specifikace

10. Záruka a podpora

10.1 Informace o záruce

The Chicago Pneumatics CP875 90 Degree Angled Die Grinder comes with a 1-letá záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, unauthorized repairs, or normal wear and tear.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

10.2 Zákaznická podpora

For technical assistance, parts, or warranty service, please contact Chicago Pneumatic customer support or visit their official webmísto.

You can also visit the official Chicago Pneumatic store on Amazon for more information and products: Chicago Pneumatic Store