1. Úvod
This manual provides essential information for the safe and effective use of your LENOX 20598966R Demolition Reciprocating Saw Blade. This bi-metal blade is engineered for demanding demolition tasks, particularly for cutting through nail-embedded wood, structural steel, lumber, and pipe. Its design incorporates Power Blast Technology for enhanced durability and T2 Technology for extended blade life and faster cuts.
Klíčové vlastnosti:
- Optimized for demolition applications, including nail-embedded wood.
- Power Blast Technology strengthens the blade to reduce breaks.
- Bi-metal construction ensures maximum durability and flexibility.
- Taller and thicker blade profile prevents bending and provides control.
- T2 Technology tooth design for longer blade life and faster cutting.
- Aggressive tang angle and tapered blade shape for easier cutting in tight areas.
Image 1: LENOX Demolition Reciprocating Saw Blade, showcasing the Power Blast Technology branding. This blade is designed for heavy-duty cutting tasks.
2. Bezpečnostní informace
Always prioritize safety when using power tools and accessories. Failure to follow these safety guidelines may result in serious injury or property damage.
- Read Your Power Tool Manual: Always refer to the operating manual of your reciprocating saw for specific safety instructions, installation procedures, and compatible accessories.
- Používejte osobní ochranné prostředky (OOP): Always wear safety glasses or goggles, hearing protection, and gloves. A dust mask is recommended when cutting materials that produce fine particles.
- Inspect Blade Before Use: Before each use, inspect the saw blade for any signs of damage, cracks, or dullness. Do not use damaged blades.
- Zajištění obrobku: Ujistěte se, že řezaný materiál je bezpečně upevněnampzablokovány nebo přidrženy, aby se zabránilo pohybu během provozu.
- Udržujte kontrolu: Always maintain a firm grip on the reciprocating saw and ensure stable footing.
- Vyhněte se překročení: Do not overreach while operating the saw. Maintain proper balance at all times.
- Odpojit napájení: Always disconnect the power tool from its power source before changing blades, making adjustments, or performing maintenance.
- Udržujte přihlížející mimo dosah: Ensure that bystanders, especially children, are kept at a safe distance from the work area.
- Větrání: Work in a well-ventilated area to avoid inhaling dust and fumes.
- Návrh 65 Varování: Tento produkt vás může vystavit chemikáliím, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.
3. Nastavení a instalace
Proper installation of the reciprocating saw blade is crucial for safe and efficient operation.
- Ujistěte se, že je elektrické nářadí vypnuté a odpojené od sítě: Before attempting to install or remove any blade, always ensure your reciprocating saw is turned off and disconnected from its power source (unplugged or battery removed).
- Identify Blade Clamp: Vyhledejte čepel clamp mechanism on your reciprocating saw. This mechanism varies by saw model (e.g., lever, twist-lock, or screw-type).
- Otevřená čepel Clamp: Follow your saw's instructions to open the blade clamp. This usually involves lifting a lever, twisting a collar, or loosening a screw.
- Vložit čepel: Insert the tang (the end of the blade without teeth) of the LENOX 20598966R blade fully into the blade clamp opening. Ensure it is seated firmly and correctly.
- Secure Blade Clamp: Close or tighten the blade clamp mechanism according to your saw's instructions. Gently pull on the blade to confirm it is securely locked in place and cannot be easily removed.
- Verify Blade Orientation: Ensure the blade teeth are facing the correct direction for cutting (typically away from the saw body).
Obrázek 2: Boční strana view of the LENOX Demolition Reciprocating Saw Blade, showing the blade profile and tooth design. This view highlights the robust construction suitable for demolition.
4. Návod k obsluze
The LENOX 20598966R blade is designed for aggressive cutting in various demolition materials. Follow these guidelines for optimal performance and safety.
- Materiálová kompatibilita: This blade is highly effective for cutting:
- Nail-embedded wood
- Konstrukční ocel
- Řezivo
- Trubka
- Other general demolition materials
- Zahájení řezu: Place the shoe of the reciprocating saw firmly against the workpiece. Start the saw at a lower speed and gradually increase to full speed as the blade begins to cut into the material.
- Technika řezání: Apply steady, consistent pressure. Allow the blade to do the work; do not force it. Excessive force can lead to blade bending, breakage, or premature wear.
- Orbital Action (if applicable): If your saw has an orbital action setting, using it can increase cutting speed in wood and soft materials, but may reduce blade life in metal. Refer to your saw's manual for guidance.
- Cutting in Tight Areas: The blade's tapered shape and aggressive tang angle facilitate easier access and cutting in confined spaces.
- Chlazení: For prolonged cuts in metal, consider using cutting fluid to extend blade life and improve cutting efficiency.
- Blade Wear: As the blade wears, its cutting efficiency will decrease. Replace the blade when it becomes dull or shows signs of damage.
5. Údržba
Proper maintenance extends the life of your LENOX reciprocating saw blade and ensures consistent performance.
- Čištění: Po každém použití očistěte kotouč od nahromaděných nečistot, pilin nebo kovových třísek. Lze použít tuhý kartáč nebo stlačený vzduch. Před uskladněním se ujistěte, že je kotouč suchý.
- Inspekce: Regularly inspect the blade for signs of wear, such as dull teeth, bent sections, or cracks. A dull blade requires more force to cut, leading to reduced efficiency and potential damage to the saw or workpiece.
- Skladování: Čepele skladujte v suchém prostředí, abyste zabránili korozi. Uchovávejte je v originálním obalu nebo v pouzdře na čepele, abyste ochránili zuby a zabránili náhodnému zranění.
- Likvidace: Opotřebované nebo poškozené čepele zlikvidujte zodpovědně v souladu s místními předpisy pro kovový odpad.
6. Řešení problémů
If you encounter issues while using your LENOX reciprocating saw blade, consider the following common problems and solutions.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čepel neřeže efektivně ani rychle. | Dull blade, incorrect blade for material, insufficient power tool speed. | Replace with a new, sharp blade. Ensure the blade is appropriate for the material. Increase saw speed if adjustable. |
| Ohnutí nebo zlomení čepele. | Excessive force, improper blade installation, cutting too fast, hitting an obstruction. | Reduce cutting pressure. Ensure blade is securely installed. Use appropriate speed. Inspect workpiece for hidden obstructions. |
| Excessive vibration during cutting. | Loose blade, damaged blade, loose workpiece, worn saw components. | Check blade installation. Replace damaged blade. Secure workpiece firmly. Inspect saw for maintenance needs. |
| Blade getting stuck in material. | Pinching of the cut, dull blade, incorrect cutting angle. | Ensure workpiece is supported to prevent pinching. Replace dull blade. Adjust cutting angle. |
7. Specifikace
Detailed specifications for the LENOX 20598966R Demolition Reciprocating Saw Blade:
- Číslo modelu: 20598966R
- Délka čepele: 9 palce
- Zuby na palec (TPI): 6
- Materiál: Bi-Metal (Metal)
- Styl: Průmyslový
- Hmotnost položky: Přibližně 0.798 unce (0.02 kilogramu)
- Rozměry produktu: 0.1 x 1.8 x 11 palce
- Barva: White (blade body)
- Výrobce: Lenox Tools
- UPC: 082472205985
- Množství balení: 2-balení
8. Záruka a podpora
For information regarding product warranty, returns, or technical support, please contact LENOX customer service or visit their official webmísto.
Oficiální LENOX Webmísto: www.lenoxtools.com
You can also visit the LENOX Store on Amazon for more products and information: LENOX Store.
