Konec produktuview
The Fluke 179 is a robust, fast, and accurate true-RMS digital multimeter designed for professional use. It combines essential measurement capabilities with a built-in thermometer, making it ideal for troubleshooting electrical and electromechanical problems in various settings. Its features include manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording.
Co je v krabici
- 179 digitální multimetr
- Teplotní sonda
- Testovací vodiče
- Installed 9V battery
Klíčové vlastnosti
- Robust, fast and accurate with manual and automatic ranging, Display Hold, Auto Hold, and Min/Max-Average recording.
- Backlit digital display, analog bar graph, and built-in temperature measurements with included thermocouple.
- Measures 1000V AC/DC; 10A AC/DC (with test leads and current jacks); resistance to 50 MΩ; capacitance to 10,000 µF, frequency to 100 kHz; temperature from -40 ℃ to 400 ℃.
Bezpečnostní informace
Always adhere to safety precautions when using the Fluke 179 Multimeter to prevent electric shock or personal injury. Read and understand all instructions before use. Ensure the meter and test leads are in good condition. Do not use the meter if it appears damaged or is not operating properly. Always use the correct terminals, function, and range for your measurements. Disconnect power to the circuit before making resistance, capacitance, or diode measurements. Wear appropriate personal protective equipment (PPE) such as safety glasses and insulated gloves.
Nastavení
Instalace baterie
The Fluke 179 comes with a 9V battery pre-installed. If replacement is needed, refer to the 'Battery Replacement' section under Maintenance.
Připojení testovacích vodičů
Insert the black test lead into the COM terminal. Insert the red test lead into the VΩmA terminal for voltage, resistance, capacitance, frequency, and low current measurements. For high current (10A) measurements, insert the red test lead into the 10A terminal.
Návod k obsluze
Obecný provoz
Turn the rotary switch to the desired function. The meter will automatically select the appropriate range for most measurements (Auto Range). Press the RANGE button to manually select a range if needed. Use the HOLD button to freeze the display reading. The MIN MAX button allows you to record minimum, maximum, and average readings over time.
Měření AC/DC Voltage
Turn the rotary switch to V~ for AC voltage or V- for DC voltage. Connect the test leads in parallel with the circuit or component to be measured. Read the voltage hodnota na displeji.
Měření AC/DC proudu
Turn the rotary switch to A~ for AC current or A- for DC current. For currents up to 400mA, use the mA terminal. For currents up to 10A, use the 10A terminal. Connect the meter in series with the circuit. Ensure the circuit is de-energized before connecting the meter in series.
Measuring Resistance, Continuity, and Diode
Turn the rotary switch to Ω for resistance, continuity, or diode test. For resistance, connect the leads across the component. For continuity, the meter will beep if the resistance is below a certain threshold. For diode test, connect the leads across the diode and observe the voltage pokles.
Measuring Capacitance and Frequency
Turn the rotary switch to the capacitance (∔) or frequency (Hz) function. For capacitance, ensure the capacitor is discharged before connecting the leads. For frequency, connect the leads across the signal source.
Měření teploty
Turn the rotary switch to the temperature (℃/℉) function. Connect the included temperature probe to the meter's input jacks. Place the probe on the surface or in the environment where temperature measurement is desired. The display will show the temperature in Celsius or Fahrenheit.
Údržba
Čištění
Otřete pouzdro reklamouamp cloth and mild detergent. Do not use abrasives or solvents. Clean the terminals periodically with a cotton swab and detergent. Dirt or moisture in the terminals can affect readings.
Výměna baterie
When the battery symbol appears on the display, the 9V battery needs to be replaced. Turn the meter off and disconnect all test leads. Remove the screw from the battery compartment cover on the back of the meter. Lift off the cover and replace the old battery with a new 9V battery. Replace the cover and secure the screw.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný displej nebo tlumený displej | Dead or low battery; Meter off; Poor battery contact | Replace battery; Turn meter on; Check battery contacts |
| Nesprávné údaje | Incorrect function/range; Damaged test leads; Dirty terminals; External interference | Select correct function/range; Inspect/replace leads; Clean terminals; Move away from strong electromagnetic fields |
| Žádný pípnutí pro signalizaci kontinuity | Circuit resistance too high; Meter not in continuity mode | Check circuit for open; Select continuity function |
Specifikace
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | 179 |
| Značka | Fluke |
| Zdroj napájení | Napájení z baterií (1 x 9V součástí balení) |
| Styl | Ruční |
| Barva | Žluť |
| Hmotnost položky | 300 gramů (10.58 unce) |
| Rozměry produktu | 10.98 x 16.5 x 3.5 palce |
| svtage (AC/DC) | Až 1000V |
| Proud (stř./stejnosměrný) | Až 10A |
| Odpor | Až 50 MΩ |
| Kapacita | Up to 10,000 µF |
| Frekvence | Až 100 kHz |
| Teplotní rozsah | -40 ℃ až 400 ℃ |
Záruka a podpora
Fluke products are known for their reliability and come with a standard warranty. For specific warranty details, please refer to the official Fluke website or the warranty card included with your product. For technical support, troubleshooting assistance, or service, please contact Fluke customer service or visit their official support portal.
Můžete také najít oficiální uživatelskou příručku (PDF) zde.
Pro rozšířené krytí jsou k dispozici plány ochrany:
- 3letý ochranný plán: 48.99 USD
- 4letý ochranný plán: 63.99 USD
- Kompletní ochrana: 16.99 USD/měsíc (vztahuje se na všechny způsobilé minulé i budoucí nákupy)
