Návod k obsluze videorekordéru Mitsubishi HSU446

Zavedení

The Mitsubishi HS-U446 is a Hi-Fi VHS Video Cassette Recorder designed for reliable playback and recording of VHS tapes. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your VCR to ensure optimal performance.

Přední view of the Mitsubishi HS-U446 VCR, showcasinjeho elegantní design a ovládací panel.

Klíčové vlastnosti

• Hi-Fi VHS Stereo Sound: Enjoy high-fidelity audio playback from compatible VHS tapes.
• Fast Rewind/Fast Forward: Experience rapid tape transport speeds, rewinding a T-120 tape in approximately 48 seconds.
• Automatické nastavení hodin: Simplifies initial setup by automatically setting the internal clock.
• Advanced One-Touch Recording: Streamlined recording functionality for ease of use.
• Auto-Rewind, Power-Off, and Eject: Convenient features that automatically rewind the tape, power off the unit, and eject the tape after playback or recording.
• Front Panel Audio/Video Inputs: Easily connect external devices such as camcorders or gaming consoles for recording or playback.

Průvodce nastavením

1. Vybalení a umístění

Carefully remove the VCR from its packaging. Place the unit on a stable, level surface with adequate ventilation. Avoid placing it near heat sources or in direct sunlight.

2. Připojení k televizi

To connect the VCR to your television, use standard RCA audio/video cables (yellow for video, white for left audio, red for right audio). Connect the VCR's "Video Out" and "Audio Out" jacks to the corresponding "Video In" and "Audio In" jacks on your television. Ensure the colors match for correct connection.

Alternatively, if your TV has an RF input, you can connect the VCR's RF output to your TV's antenna input using a coaxial cable. Tune your TV to channel 3 or 4, depending on the VCR's output setting.

3. Připojení napájení

Zapojte napájecí kabel videorekordéru do standardní elektrické zásuvky.

4. Připojení na předním panelu

The front panel of the HS-U446 features convenient input jacks for temporary connections. Lift the small flap on the left side of the front panel to reveal the Video In (yellow) and Audio In (white/red) ports. These are ideal for connecting a camcorder or other portable video devices for quick recording or playback.

Návod k obsluze

1. Zapnutí/vypnutí

Stiskněte tlačítko MOC button on the front panel or remote control to turn the VCR on or off.

2. Inserting a VHS Tape

With the VCR powered on, gently insert a VHS tape into the tape slot with the label facing up. The VCR will automatically load the tape.

3. Playing a Tape

After inserting a tape, press the HRÁT button. The VCR will begin playing the tape. If the tape is not at the beginning, it may fast forward or rewind to the start before playing.

4. Zastavení přehrávání

Stiskněte tlačítko ZASTÁVKA button to halt playback. The tape will stop at its current position.

5. Pausing Playback

Během přehrávání stiskněte tlačítko PAUZA pro dočasné zmrazení obrazu. Stiskněte tlačítko HRÁT znovu pro obnovení přehrávání.

6. Rychlé převíjení vpřed a vzad

Stiskněte tlačítko FF (Fast Forward) or REW (Rewind) buttons to quickly advance or reverse the tape. Press HRÁT or ZASTÁVKA to exit fast forward/rewind mode.

7. Ejecting a Tape

Stiskněte tlačítko EJECT button. The VCR will automatically rewind the tape (if enabled) and then eject it from the slot.

8. Nahrávání

The HS-U446 features Advanced One-Touch Recording. To record, ensure a blank or recordable tape is inserted. Select the desired input source (e.g., TV channel, external input). Press the REC pro zahájení nahrávání. Stiskněte tlačítko ZASTÁVKA pro ukončení nahrávání.

Note: For detailed timer recording or advanced recording options, please refer to the full user manual that came with your unit.

Údržba

1. Čištění exteriéru

Wipe the exterior of the VCR with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the finish.

2. Tape Head Cleaning

Over time, tape heads can accumulate dirt, leading to poor picture and sound quality. Use a dry-type VHS head cleaning cassette periodically. Follow the instructions provided with the cleaning cassette. Avoid wet-type cleaners unless specifically recommended by Mitsubishi, as they can cause damage.

3. Péče o pásku

• VHS kazety skladujte v jejich obalech, mimo dosah prachu, přímého slunečního záření a silných magnetických polí.
• Nevystavujte pásky extrémním teplotám nebo vlhkosti.
• Rewind tapes fully before storing them to prevent tension issues.

Odstraňování problémů

Specifikace

Záruka a podpora

For specific warranty information and technical support, please refer to the warranty card included with your original purchase or visit the official Mitsubishi website. As this model is discontinued, support options may be limited. Online resources and community forums may also provide helpful information for older models.