GPX FRS200

Uživatelská příručka k obousměrné vysílačce GPX FRS200 s dosahem 2 míle a 14 kanály FRS

Model: FRS200

Zavedení

This manual provides detailed instructions for the operation and maintenance of your GPX FRS200 2-Mile 14-Channel FRS Two-Way Radio. Please read this manual thoroughly before using your device to ensure proper function and to maximize your communication experience.

GPX FRS200 Two-Way Radio

Image of the GPX FRS200 2-Mile 14-Channel FRS Two-Way Radio, showing its silver casing, antenna, LCD screen displaying '14-00', and control buttons including FUNC, ENTER, LOCK, and CALL.

Vlastnosti produktu

Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

Nastavení

1. Instalace baterie

  1. Najděte kryt přihrádky na baterie na zadní straně rádia.
  2. Posuňte nebo odepněte kryt pro otevření přihrádky.
  3. Vložte čtyři (4) baterie typu AAA a dbejte na správnou polaritu (+/-) vyznačenou uvnitř přihrádky.
  4. Nasaďte zpět kryt přihrádky na baterie a ujistěte se, že bezpečně zacvakne na místo.

Note: For optimal performance, use high-quality alkaline batteries. Rechargeable batteries may also be used, but their performance characteristics may differ.

2. Zapnutí/vypnutí

Návod k obsluze

1. Základní komunikace (Push-to-Talk)

  1. Ensure both radios are powered on and set to the same channel and subcode.
  2. Pro přenos stiskněte a podržte STISKNĚTE TALK (PTT) tlačítko umístěné na boku rádia. Mluvte jasně do mikrofonu.
  3. Uvolněte PTT tlačítko pro poslech odpovědi.

2. Výběr kanálu

  1. Stiskněte tlačítko ZAMĚSTNANEC Jedním stisknutím tlačítka přejděte do režimu výběru kanálu. Číslo kanálu na LCD displeji bude blikat.
  2. Použijte UP or DOLŮ buttons (often integrated with other controls) to select one of the 14 available FRS channels.
  3. Stiskněte tlačítko ENTER potvrďte svůj výběr.

3. Subcode Selection (CTCSS/DCS)

  1. Po výběru kanálu stiskněte tlačítko ZAMĚSTNANEC button again to enter subcode selection mode. The subcode number on the LCD will flash.
  2. Použijte UP or DOLŮ buttons to select one of the 38 available subcodes.
  3. Stiskněte tlačítko ENTER potvrďte svůj výběr.
  4. Note: Both radios must be set to the same channel and subcode to communicate. Setting the subcode to '00' typically disables the subcode function.

4. Tlačítko volání

5. Podsvícený LCD

6. Zámek klávesnice

Údržba

Odstraňování problémů

ProblémMožná příčinaŘešení
Žádná sílaVybité nebo nesprávně vložené baterie.Check battery polarity. Replace batteries with fresh ones.
Nelze komunikovat s jinými rádiiRadios on different channels or subcodes; out of range.Ensure all radios are on the same channel and subcode. Move closer to the other radio. Check for obstructions.
Statický nebo špatná kvalita zvukuWeak signal; interference; out of range.Move to an open area. Reduce distance between radios. Check for sources of electrical interference.
Call button transmits static (as noted in product description)Potential manufacturing inconsistency or specific unit issue.If this issue persists, consider contacting customer support or the retailer.
Buttons are difficult to press or unresponsivePhysical obstruction; internal issue.Ensure no debris is lodged around buttons. If issue persists, contact customer support.

Specifikace

Záruka a podpora

For warranty information, please refer to the documentation included with your purchase or contact the retailer where the product was acquired. For technical support or service inquiries, please visit the official GPX webnebo se obraťte přímo na jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi pro případ reklamace.