Zavedení
Thank you for choosing the Altec Lansing ACS33 PowerCube Computer Speaker System. This 3-piece audio system is designed to provide high-quality sound for your computer, enhancing your audio experience with its compact satellite speakers and powerful subwoofer. This manual provides essential information for setting up, operating, and maintaining your speaker system.
The ACS33 system features two compact, magnetically shielded satellite speakers and a powered subwoofer. It includes convenient volume control and a power-on LED indicator for ease of use.
Image: The Altec Lansing ACS33 PowerCube 3-piece computer speaker system, showing the subwoofer and two satellite speakers.
Obsah balení
Zkontrolujte prosím, zda jsou v balení přítomny všechny komponenty:
- Dva (2) satelitní reproduktory
- One (1) Powered Subwoofer
- Integrated Cables for connection
- Pokyny pro uživatele (tato příručka)
_image_3.jpeg)
Obrázek: Nahoře view of the Altec Lansing ACS33 PowerCube system, displaying the subwoofer and two satellite speakers with their connecting cables.
Pokyny pro nastavení
Follow these steps to correctly set up your Altec Lansing ACS33 speaker system:
- Umístění: Position the subwoofer on the floor near your computer. Place the two satellite speakers on either side of your computer monitor, ensuring they are equidistant from your listening position for optimal stereo imaging. The satellite speakers are magnetically shielded to prevent interference with your monitor.
- Připojení satelitních reproduktorů: Connect the cables from the two satellite speakers to the corresponding speaker output jacks on the back of the subwoofer. Ensure a secure connection.
- Připojení ke zdroji zvuku: Connect the audio input cable from the subwoofer to the audio output jack (typically green) on your computer's sound card.
- Připojení napájení: Plug the subwoofer's power cord into a standard AC wall outlet.
_image_1.jpeg)
Obrázek: Zadní view of the Altec Lansing ACS33 subwoofer, showing the input and output connections for the satellite speakers and the power input.
Návod k obsluze
Once the system is set up, follow these steps to operate your speakers:
- Zapnutí: Locate the power/volume control knob on one of the satellite speakers. Turn the knob clockwise until you hear a click and the power-on LED illuminates.
- Upravit hlasitost: Continue turning the power/volume control knob clockwise to increase the volume. Turn it counter-clockwise to decrease the volume.
- Přehrávání zvuku: Start playing audio from your computer. Adjust the volume to your desired listening level.
- Vypnout: To turn off the system, turn the power/volume control knob counter-clockwise until you hear a click and the power-on LED extinguishes.
Údržba
Proper care will ensure the longevity and performance of your speaker system:
- Čištění: Use a soft, dry cloth to clean the speaker surfaces. Do not use liquid cleaners or abrasive materials, as they may damage the finish or internal components.
- Větrání: Ensure that the subwoofer and satellite speakers have adequate ventilation. Do not block any vents, especially on the subwoofer, to prevent overheating.
- Prostředí: Avoid placing the speakers in direct sunlight, near heat sources, or in areas with high humidity or excessive dust.
- Správa kabelů: Keep cables tidy and free from kinks or excessive bending to prevent damage.
Odstraňování problémů
If you encounter issues with your ACS33 speaker system, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk | Speakers not powered on; volume too low; incorrect audio connection; computer audio settings. | Ensure power is on and LED is lit. Increase volume. Check all cable connections. Verify computer's audio output is set to the correct device. |
| Zkreslený zvuk | Volume too high; poor audio source quality; loose connection. | Reduce volume. Test with a different audio source. Check all cable connections for tightness. |
| Funguje pouze jeden satelitní reproduktor | Loose connection to subwoofer; computer's balance settings. | Check the connection of the non-working satellite speaker to the subwoofer. Verify computer's audio balance settings. |
| Hučení nebo bzučení | Ground loop interference; proximity to other electronic devices. | Try plugging the speakers into a different electrical outlet. Move speakers away from other electronics. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.
Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | ACS33 |
| Typ reproduktoru | Indoor, 3-piece system |
| Satellite Power | 10 Watts (per satellite) |
| Výkon subwooferu | 15 wattů |
| Total Speaker Maximum Output Power | 35 wattů |
| Frekvenční odezva | 70 Hz - 18 kHz |
| Poměr signálu k šumu (S/N) | > 65 dB |
| Satellite Driver | One 3 inch full range driver (per satellite) |
| Ovladač subwooferu | One 4 inch long-throw woofer |
| Vstupní impedance | > 10 k ohmů |
| Technologie připojení | Kabelové |
| Zdroj napájení | AC (Built-in power supply) |
| Rozměry produktu (subwoofer) | 17.6 cm H x 11.7 cm Š x 8.6 cm V (přibližně) |
| Hmotnost položky | 10.85 libry |
| UPC | 021986940333 |
Informace o záruce
The Altec Lansing ACS33 PowerCube Computer Speaker System comes with a Limited Warranty. Please refer to the warranty card included with your product for specific terms, conditions, and duration of coverage. Keep your proof of purchase for warranty claims.
Zákaznická podpora
For technical assistance or customer service inquiries, please contact Altec Lansing support:
- Telefon: 800-ALTEC-88
- Webmísto: www.altecmm.com
Please have your product model number (ACS33) and purchase information ready when contacting support.
