Návod k obsluze testeru syntetických diamantů APEX Advanced
Návod k obsluze testeru syntetických diamantů APEX Advanced

Thank you for your purchase of the GemTrue APEX DK10300 Developed for excellence in synthetic diamond testing.
It is important that you read this user guide to gain a good understanding of this device and how it should be used to obtain accurate test results.

  1. Press and hold the power button until it beeps, then release.
    Průvodce instalací
  2. Wait for calibration to complete.
    Průvodce instalací
  3. Please remove the cap and wait.
    Průvodce instalací
  4. Choose the test option.
    Průvodce instalací
  5. Always make sure to hold the metal touch areas during testing for accurate results.
    Průvodce instalací
  6. Hold tester and Jewellery at 90 degrees to one another.
    Průvodce instalací
  7. Press the probe firmly at 90 degrees onto the stone’s table facet to start the test.
    Průvodce instalací
  8. Do not move or release. Wait for result.
    Průvodce instalací
  9. Test result will appear on the screen.
    Průvodce instalací
  10. Place loose stone on the plate. Press the probe firmly at a 90-degree onto the stone’s table facet
    Průvodce instalací
  11. Select test again or return to main menu.
    Průvodce instalací
  12. To turn off the device, press the shut down option.
    Průvodce instalací
  13. Always replace the cap when you are not using the device
    Průvodce instalací
  14. Insert the Type-C cable with a 5V / minimum 0.5A charger to recharge the device.
    Průvodce instalací
  15. When plugged in, the power light is red, it turns green when fully charged.
    Průvodce instalací

DŮLEŽITÉ POZNÁMKY

A. Battery Usage
Charge the tester fully before use. Low battery may affect accuracy. Recharge when the battery icon reaches the last red bar. Avoid using the tester while charging to prevent reducing battery life.
B. Nabíjení
Use the provided USB-C cable for optimal charging.
The front power light turns red when charging and green when fully charged.
Required charger: DC 5V/ Minimum 0.5A (does not support PD fast charging).
C. Retesting
Wait for the result to clear before retesting.
Allow stones to cool between tests to prevent heat buildup, which may affect results.
D. Testing Stones
This tester is designed for testing CVD/HPHT/Type Ila, Moissanite, Natural Diamond, Simulant, and Cubic Zirconia (CZ).
E. Stone Colour Range
Optimized for polished stones with D to M color range. Stones outside this range or unpolished stones may yield inaccurate results.
F. Stone Cut and Size
Designed for round brilliant-cut stones.
Minimum testing size: 0.2ct.
Fancy-shaped stones may cause inaccurate results.
G. Care Instructions
Clean the tester’s tip gently with the included polishing cloth if unused for several days.
Clean stones with a dry tissue before testing to remove dust or oils.
H. Professional Consultation
If the tester provides unexpected results, consult a qualified gemologist or gemological association for further assessment.

This Tester is Fully Patented
Patenty USA: 12,235,212 / 12,130,238/11,243,170/11,073,482 / 10,539,010/8,947
111/10,203,317/10,203,288/9,453,808
China Patents: 202222990840X / 202210427519.2
Hongkong: HK40076121 EU: EP3032242B1

IMPORTANT SAFETY AND OPERATING GUIDELINES

UV Safety Warning
This device emits UV light briefly during testing. Avoid direct eye exposure to the probe sensor. When used as instructed, the UV light is safe and poses no harm to eyes or skin. Always follow safety guidelines for proper use.

Upozornění na dobíjecí baterii
Charge the device only with the specified charger (DC 5V/Minimum 0.5A).
Do not overcharge or leave it plugged in after it is fully charged.
Nevystavujte baterii extrémním teplotám nebo přímému slunečnímu záření.
For safe disposal, follow local recycling guidelines for rechargeable batteries.

Provozní podmínky
Provozní teplota: 10 °C až 35 °C (50 °F až 95 °F)
Skladovací teplota: 20 °C až 25 °C (68 °F až 77 °F)
Air Humidity: 15% to 70%

GEMTRUE WARRANTY TERMS AND CONDITIONS
The Gem True” APEX comes with a 24-month warranty from the date of purchase, provided the device is used as instructed in this user guide.
The warranty covers only manufacturing defects. Battery warranty is valid for 6 months due to its consumable nature.

Výjimky ze záruky:
The warranty is void if the device has been disassembled, tampered with, or subjected to misuse.

Omezení odpovědnosti:

  • GemTrue® is not liable for any direct or indirect damages resulting from the use of this tester.
  • The device is sold “as is” with no additional warranties, except as required by applicable law.
  • GemTrue® reserves the right to modify these terms at any time.

GEMTRUE Logo

Dokumenty / zdroje

APEX APEX Pokročilý tester syntetických diamantů [pdfNávod k obsluze
Rychlý test, pokročilý tester syntetických diamantů APEX, APEX, pokročilý tester syntetických diamantů, tester syntetických diamantů, tester diamantů

Reference

Zanechte komentář

Vaše emailová adresa nebude zveřejněna. Povinná pole jsou označena *