Uživatelská příručka k ruční průmyslové endoskopické kameře Inskam G10

1. Úvod

The Inskam G10 is a versatile handheld industrial endoscope camera designed for detailed visual inspection in hard-to-reach areas. Featuring an 8mm single or dual lens, 2.0-megapixel resolution, and a 5-inch IPS display, it provides clear and precise imaging for various applications. Its IP67 waterproof rating ensures reliable performance in challenging environments.

2. Obsah balení

Pečlivě zkontrolujte balení, abyste se ujistili, že jsou přítomny všechny položky:

• Inskam G10 Handheld Industrial Endoscope Unit
• Flexible Semi-Rigid Cable (10m length, with 8mm lens)
• USB nabíjecí kabel
• Standard Accessories: Hook, Magnet, Protective Ring
• Uživatelská příručka (tento dokument)

3. Specifikace

4. Nastavení

4.1 Nabíjení zařízení

Before first use, fully charge the endoscope unit. Connect the provided USB Type-C cable to the charging port on the device and a suitable USB power adapter (not included). The battery indicator on the screen will show charging status. A full charge takes approximately 2.5 hours.

4.2 Připojení sondy

The G10 features an 'Airhead design' allowing for easy and stable connection of the probe. Align the connector of the flexible cable with the port on the main unit and push firmly until it clicks into place. Ensure a secure connection for optimal performance.

4.3 Instalace TF karty (volitelné)

To save photos and videos, insert a TF (MicroSD) card into the designated slot on the side of the main unit. Ensure the card is inserted correctly until it locks into place.

4.4 Připevnění příslušenství

The endoscope comes with a hook, magnet, and protective ring. These can be attached to the tip of the camera lens for specific tasks. The protective ring helps prevent damage to the lens in tight spaces.

5. Provoz

5.1 Zapnutí/vypnutí

Press and hold the power button (usually an orange button on the handle) for a few seconds to turn the device on. The 5-inch IPS display will light up. To power off, press and hold the power button again.

5.2 Navigace v rozhraní

The display features several buttons for control:

• Tlačítko Nastavení (ikona ozubeného kola): Access system settings, such as language, date/time, and display brightness.
• Tlačítko OK: Potvrzení výběru nebo vstup do nabídek.
• Photo/Video Button (Camera Icon): Press once to take a photo. Press and hold to start/stop video recording.
• Tlačítko M (Režim): Switch between different modes or functions, such as switching between single and dual lenses.

5.3 Nastavení jasu LED diod

The camera probe is equipped with 8+1 adjustable LED lights. Use the dedicated buttons (often up/down arrows or within settings) to increase or decrease the brightness for optimal visibility in dark environments.

5.4 Přepínání objektivů (pouze modely s dvojitým objektivem)

If your G10 model has a dual lens, you can switch between the front-facing and side-facing lenses with a dedicated button (often labeled 'M' or a specific lens switch icon). This allows for comprehensive inspection without re-orienting the probe.

5.5 Understanding Focal Depth

The G10 has a specific focal depth for clear imaging. For lens A, the optimal focal depth is 2-10cm. For lens B (if dual lens), it's 2-5cm. Ensure the camera is within this range for the clearest image.

5.6 Waterproof Capability

The camera lens and flexible cable are IP67 waterproof, allowing for inspection in wet or submerged environments. The main unit is NOT waterproof and should be kept dry.

6. Údržba

6.1 Čištění

• Objektiv fotoaparátu: After each use, especially in dirty or wet conditions, gently wipe the camera lens with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and then dry thoroughly. Do not use abrasive cleaners.
• Flexibilní kabel: Otřete kabel čistým čističemamp cloth. Ensure it is dry before coiling for storage.
• Hlavní jednotka: Clean the main unit with a soft, dry cloth. Avoid getting any liquids into the ports or buttons.

6.2 Skladování

Store the endoscope in a cool, dry place, away from direct sunlight and extreme temperatures. Coil the flexible cable loosely to prevent kinks or damage. It is recommended to store the device in its original carrying case to protect it from impacts.

6.3 Péče o baterii

To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to about 50-70% capacity every few months.

7. Řešení problémů

7.1 Žádný obraz na obrazovce

• Ujistěte se, že je zařízení zapnuté a plně nabité.
• Check if the flexible cable is securely connected to the main unit.
• Verify that the camera lens is not obstructed or damaged.

7.2 Špatná kvalita obrazu

• Důkladně očistěte objektiv fotoaparátu.
• Upravte jas LED diod podle prostředí.
• Ujistěte se, že objekt je viewed is within the optimal focal depth (2-10cm for lens A, 2-5cm for lens B).
• Check for any physical damage to the camera or cable.

7.3 Zařízení se nezapíná

• Nabíjejte zařízení alespoň 30 minut.
• Zkuste jiný nabíjecí USB kabel a napájecí adaptér.
• Pokud problém přetrvává, kontaktujte zákaznickou podporu.

7.4 Unable to Save Photos/Videos

• Ensure a TF (MicroSD) card is properly inserted.
• Zkontrolujte, zda je na TF kartě dostatek volného místa.
• Format the TF card (this will erase all data, back up first if necessary).
• Try a different TF card.

8. Záruka a podpora

The Inskam G10 Handheld Industrial Endoscope Camera comes with a jednoletá záruka. This warranty covers manufacturing defects and malfunctions not caused by man-made damage or misuse. For warranty claims or technical support, please contact your retailer or the manufacturer directly.

Kontaktní údaje výrobce:

• WhatsApp: +86 13517316019
• E-mail: 807569846@qq.com

Our factory ensures product quality through advanced production technology and management, with all goods tested one by one to ensure 100% functionality before shipment. We hold RoHS, CE, and FCC Certificates.

9. Uživatelské tipy

• Optimální Viewing: Always try to position the camera within its specified focal depth for the clearest image. Adjusting the distance slightly can make a big difference.
• Používejte příslušenství moudře: The hook and magnet can be invaluable for retrieving dropped items in tight spaces. The protective ring helps prevent scratches on the lens.
• Správa kabelů: When navigating long or complex pipes, gently push the semi-rigid cable rather than forcing it to avoid damage.
• Úspora baterie: Turn off the screen or the device when not actively inspecting to extend battery life.
• Pravidelný úklid: A clean lens is crucial for clear images. Make it a habit to clean the lens after each use, especially in dusty or oily environments.