Modern Extendable Wooden Dining Table

Zavedení

Thank you for choosing the Modern Extendable Wooden Dining Table. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining table. Please read these instructions carefully before beginning assembly and retain them for future reference.

Bezpečnostní informace

• Stůl vždy sestavujte na měkkém a čistém povrchu, abyste zabránili poškrábání.
• Před použitím se ujistěte, že jsou všechny šrouby a spojovací prvky bezpečně utažené. Pravidelně kontrolujte a v případě potřeby dotahujte.
• Nestůjte ani nesedejte na stole.
• Nepřekračujte doporučenou nosnost stolu.
• Během montáže uchovávejte malé díly mimo dosah dětí, aby se zabránilo nebezpečí udušení.
• Use caution when extending or retracting the table to avoid pinching fingers.

Obsah balení

Před zahájením montáže ověřte, zda jsou přítomny všechny součásti. Pokud některé součásti chybí nebo jsou poškozené, kontaktujte zákaznickou podporu.

Specifikace

Figure 1: Dining Table Dimensions

Nastavení a montáž

This dining table requires assembly. Please follow these general steps. Specific diagrams and hardware may vary slightly. It is recommended to have two people for assembly.

1. Rozbalte komponenty: Carefully remove all parts from the packaging. Lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent damage. Identify all parts against the package contents list.
2. Sestavte základny: Attach any necessary support beams or crossbars to the double sturdy bases according to the included diagrams. Ensure all connections are firm.
3. Attach Bases to Tabletop: Carefully place the tabletop upside down on your protected surface. Align the assembled bases with the pre-drilled holes on the underside of the tabletop. Secure the bases to the tabletop using the provided screws and bolts. Do not fully tighten until all connections are made.
4. Assemble Extension Mechanism (if separate): If the extension mechanism is not pre-assembled, follow the instructions to install it on the underside of the tabletop.
5. Insert Extension Leaf: If the table is designed with a removable leaf, ensure the runners are clear. Insert the extension leaf into the center of the table, aligning it with the main tabletop sections.
6. Konečné utažení: Jakmile jsou všechny součásti na svém místě a zarovnané, zcela utáhněte všechny šrouby a vruty.
7. Postavení stolu do vzpřímené polohy: With assistance, carefully flip the table upright.

Figure 2: Fully Assembled Dining Table

Návod k obsluze

Rozšíření stolu

1. Clear the tabletop of all items.
2. Locate the locking mechanisms (if any) underneath the table that secure the two halves of the tabletop. Unlock them.
3. Gently pull the two halves of the tabletop apart. The extension runners will slide, creating a gap in the center.
4. Carefully place the extension leaf into the gap, ensuring it sits flush and aligns with the main tabletop surface.
5. Push the two halves of the tabletop back together until they meet the extension leaf and are flush.
6. Re-engage the locking mechanisms underneath the table to secure the extended tabletop.

Figure 3: Table in Extended Position

Zasunutí stolu

1. Clear the tabletop of all items.
2. Unlock the locking mechanisms underneath the table.
3. Gently pull the two halves of the tabletop apart to create a gap.
4. Carefully lift and remove the extension leaf. Store it in a safe place to prevent damage.
5. Push the two halves of the tabletop back together until they meet and are flush.
6. Re-engage the locking mechanisms underneath the table to secure the compact tabletop.

Figure 4: Table in Compact Position

Údržba

• Čištění: Otřete povrch stolu měkkým hadříkemamp cloth. Avoid harsh chemicals or abrasive cleaners that can damage the wood finish.
• Rozlití: Clean spills immediately to prevent staining, especially on wooden surfaces.
• Teplo a vlhkost: Use coasters and placemats to protect the tabletop from hot dishes, moisture, and scratches.
• sluneční světlo: Avoid prolonged exposure to direct sunlight, which can cause fading or warping of the wood.
• Pravidelné kontroly: Regularly inspect all fasteners and connections. Tighten any loose screws or bolts to maintain stability.

Odstraňování problémů

Table is Wobbly

• Ujistěte se, že všechny montážní šrouby a vruty jsou zcela utažené.
• Check that the table is on a level surface. Adjust furniture glides or place shims if necessary.

Extension Mechanism is Stiff or Stuck

• Ensure the locking mechanisms are fully disengaged.
• Check for any debris or obstructions in the extension runners. Clean if necessary.
• Apply a small amount of silicone-based lubricant to the runners if they are excessively stiff.

Tabletop Not Flush After Extension

• Ensure the extension leaf is correctly seated and fully inserted.
• Verify that the locking mechanisms are properly engaged to pull the sections together.

Tipy pro uživatele

• For optimal stability, always extend or retract the table with two people.
• When not using the extension leaf, store it flat in a dry place to prevent warping.
• Consider adding felt pads to the bottom of the table bases to protect your flooring and make moving the table easier.

Záruka a podpora

For any questions, concerns, or to report missing/damaged parts, please contact the seller or manufacturer directly. Please have your model number (W1347) and purchase information ready when contacting support.