1. Úvod
The SRNE SYP 5K-S is a 48V hybrid solar inverter designed for off-grid applications, offering a 5KW capacity with a 100A MPPT solar charge controller. This inverter supports both Lithium and Lead-Acid battery types and can be configured for parallel operation with up to 6 units. It features advanced MPPT technology for high efficiency, robust safety measures, and a user-friendly design, making it suitable for various scenarios including residential homes, farms, telecommunication sites, and remote locations.
2. Bezpečnostní informace
⚠ UPOZORNĚNÍ: Tento produkt vás může vystavit chemikáliím včetně olova, o kterém je ve státě Kalifornie známo, že způsobuje rakovinu a vrozené vady nebo jiné reprodukční poškození. Pro více informací přejděte na www.P65Warnings.ca.gov.
Always follow local electrical codes and safety regulations during installation and operation. Ensure proper grounding and ventilation. Only qualified personnel should perform installation and maintenance.
3. Konec produktuview & Funkce
The SRNE SYP 5K-S inverter is designed for high performance and reliability in solar energy systems. Key features include:
- Účinnost: Advanced MPPT technology with up to 99.9% efficiency.
- PV vstup: Up to 22A PV input current, suitable for high power PV modules.
- Bezpečnost: Comprehensive 360-degree security from hardware to software, including IEC safety approvals.
- Nabíjení: Up to 100A hybrid charging current.
- výstup: Outputs high-quality pure sine wave AC power.
- Škálovatelnost: Supports parallel connection of up to 6 units for increased capacity.
- Design: Industrial design with a modern aesthetic, easy to install and use.
- Správa baterie: Exclusive Li-ion battery BMS dual activation.
- Úspora nákladů: Time-slot function to optimize energy usage and save costs with peak-valley tariffs.
Aplikační scénáře:
- Obytné domy
- Farmy
- Telecommunication Sites
- Countryside Installations
- Island Power Systems
- Pasture Applications
4. Specifikace
Detailed technical specifications for the SRNE SYP 5K-S Hybrid Solar Inverter are provided below. For a visual representation, refer to Figure 4.
| Kategorie | Parametr | Value (SYP 5K-S) |
|---|---|---|
| Výstup měniče | Jmenovitý výstupní výkon | 5,000W |
| Max.špičkový výkon | 10,000 VA | |
| Jmenovitý výstupní objemtage | 230Vac (L/N/PE single-phase) | |
| Nosnost motorů | 4HP | |
| Jmenovitá střídavá frekvence | 50/60 Hz | |
| Průběh | Čistá sinusovka | |
| Přepnout čas | 10 ms (obvykle) | |
| Paralelní kapacita | 1-6 units (single/three phase) | |
| Baterie | Typ baterie | Li-ion / Lead-acid / User-define |
| Jmenovitý objem baterietage | 48 V DC | |
| svtage Dosah | 40~60Vdc | |
| Max.MPPT nabíjecí proud | 100A | |
| Max. Síťový/Nabíjecí proud generátoru | 60A | |
| Max. Hybridní nabíjecí proud | 100A | |
| PV vstup | Num. of MPPT | 1 |
| Max. výkon FV pole | 5,500W | |
| Max.vstupní proud | 22A | |
| Max.svtage otevřeného okruhu | 500 V DC | |
| MPPT svtage Dosah | 120~450Vdc | |
| Mains/Generator Input | Vstupní objemtage Dosah | 90~280Vac |
| Frekvenční rozsah | 50/60 Hz | |
| Bypass Overload Current | 40A | |
| Účinnost | Efektivita sledování MPPT | 99.9 % |
| Max. Účinnost střídače baterie | 92 % | |
| Generál | Rozměry | 446.9*350*133mm (1.47*1.15*0.44ft) |
| Hmotnost | 13kg (28.66lb) | |
| Stupeň ochrany | IP20, pouze pro vnitřní použití | |
| Rozsah provozních teplot | -10~55°C | |
| Hluk | <60dB | |
| Způsob chlazení | Forced air cooling with adjustable air speed | |
| Záruka | 24 měsíců | |
| Sdělení | Vestavěná rozhraní | RS485 / USB / Dry contact |
| External Modules (Optional) | Wi-Fi / GPRS | |
| Osvědčení | Bezpečnost | CE (IEC62109-1/2) |
| EMC | EN61000 | |
| RoHS |
5. Nastavení
Proper installation is crucial for the safe and efficient operation of your inverter. Refer to the included quick start guide or video instructions for detailed steps. Below are general guidelines:
5.1 Montáž
- The inverter is rated IP20 and is designed for pouze pro vnitřní použití.
- Měnič namontujte v dobře větraném prostoru, mimo dosah přímého slunečního záření, zdrojů tepla a hořlavých materiálů.
- Ensure sufficient clearance around the unit for proper air circulation and cooling.
- Use appropriate mounting hardware to secure the inverter firmly to a vertical surface.
5.2 Elektrické připojení
All electrical connections must be performed by a qualified electrician in accordance with local and national electrical codes. Refer to Figure 5 for an overview of the connection ports.
- Připojení baterie: Connect the 48Vdc battery bank to the BAT+ and BAT- terminals. Ensure correct polarity. The inverter is compatible with Li-ion and Lead-acid batteries.
- Připojení FV vstupu: Connect the solar panel array to the PV+ and PV- terminals. Ensure the PV array voltage is within the MPPT operating voltage range (120-450Vdc) and the open circuit voltage nepřesahuje 500Vdc.
- AC Input (Mains/Generator): Connect the AC grid or generator input to the AC IN terminals. The input voltagRozsah je 90-280Vac.
- AC výstup: Connect your AC loads to the AC OUT terminals. The rated output voltage je 230Vac.
- Komunikační porty: Utilize the RS485, USB, or Dry Contact ports for monitoring and control. Optional Wi-Fi/GPRS modules can be connected for external communication.
- Paralelní připojení: If using multiple inverters in parallel (up to 6 units), follow the specific instructions for parallel wiring provided in the detailed manual.
6. Návod k obsluze
6.1 Zapnutí/vypnutí
- Zapnutí: After all connections are securely made and verified, switch on the battery breaker, then the PV array breaker, and finally the AC input breaker. Turn the inverter's main power switch to the 'ON' position. The display will illuminate, and the inverter will begin its startup sequence.
- Vypnout: To shut down the system, first disconnect the AC output loads, then turn off the AC input breaker, followed by the PV array breaker, and finally the battery breaker. Turn the inverter's main power switch to the 'OFF' position.
6.2 Display and Monitoring
The integrated LCD display provides real-time information on system status, battery charge, PV input, AC output, and error codes. Use the navigation buttons below the display to cycle through different screens and settings. Refer to the detailed manual for specific menu navigation and parameter adjustments.
6.3 Time-Slot Function
The inverter includes a programmable time-slot function to optimize energy usage. This feature allows you to configure the inverter to prioritize certain power sources (e.g., battery, grid) during specific times of the day, helping to reduce electricity costs by utilizing cheaper off-peak energy or maximizing self-consumption of solar power.
7. Údržba
Regular maintenance ensures the longevity and optimal performance of your SRNE SYP 5K-S inverter.
- Čištění: Periodically clean the inverter's exterior and ventilation openings to prevent dust buildup, which can impede cooling. Use a dry, soft cloth. Do not use liquid cleaners.
- Spojení: Každoročně zkontrolujte všechny elektrické spoje, zda nejsou těsné a zda nevykazují známky koroze. V případě potřeby je dotáhněte.
- Větrání: Ensure that the inverter's cooling fans are free from obstructions and operating correctly. The inverter uses forced air cooling with adjustable air speed.
- Prostředí: Verify that the operating environment remains within the specified temperature range (-10~55°C) and that the IP20 rating (indoor only) is respected.
8. Řešení problémů
This section provides guidance on common issues you might encounter. For complex problems, please contact technical support.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Měnič se nezapíná | No battery power; main switch off; loose connections | Zkontrolujte objem baterietage; ensure main switch is ON; verify all connections. |
| Žádný AC výstup | Overload; short circuit; inverter fault | Reduce load; check for short circuits; consult display for error codes. |
| FV vstup se nenabíjí | Insufficient sunlight; PV array disconnected; MPPT fault | Zkontrolujte podmínky slunečního svitu; ověřte připojení FV panelů; zajistěte objem FV panelů.tage je v dosahu. |
| Zobrazí se kód chyby | Specifická systémová chyba | Refer to the detailed manual for specific error code meanings and troubleshooting steps. |
9. Uživatelské tipy
- Kompatibilita baterie: Ensure your battery type (Li-ion or Lead-acid) is correctly configured in the inverter settings for optimal charging and discharge cycles.
- Paralelní provoz: When connecting multiple units in parallel, ensure all inverters are of the same model and firmware version for stable operation.
- Sledování: Regularly check the inverter's display or connected monitoring system (via RS485/USB/Wi-Fi/GPRS) to track performance and identify potential issues early.
10. Záruka a podpora
The SRNE SYP 5K-S Hybrid Solar Inverter comes with a Záruka 24 měsíců od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.
For technical support, product debugging assistance, or repair services, please contact your local dealer or the manufacturer's professional technical support team. Information regarding local repair outlets may be available through your point of purchase.
