1. Úvod
The ZTE G5 Air 5G CPE MC8510D is a high-performance 5G Customer Premises Equipment (CPE) designed to provide ultra-fast internet connectivity using both 5G cellular networks and the latest Wi-Fi 7 technology. This device offers robust features for home and business environments, including advanced networking capabilities, multiple wired ports, and support for a large number of connected devices. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your ZTE G5 Air 5G CPE MC8510D.
2. Obsah balení
Please check the contents of your package. If any item is missing or damaged, contact your vendor.
- ZTE G5 Air 5G CPE MC8510D Unit
- Power Adapter (EU or UK, depending on region)
- Stručný průvodce (může být součástí)
- Ethernet Cable (may be included)
3. Zařízení skončiloview
The ZTE G5 Air 5G CPE MC8510D features a sleek, vertical design with various ports and indicators for easy setup and monitoring.
3.1 Přední panel
The front panel typically features LED indicators for power, network status, and Wi-Fi activity.
3.2 Rear Panel (Ports)
- Slot pro SIM kartu: For inserting your 4FF 3V/1.8V SIM card.
- USB rozhraní: 1 x Type-C USB3.1 port.
- RJ45 Interfaces: 1 x 2.5GE Ethernet port and 1 x GE Ethernet port for wired connections.
- Rozhraní RJ11: 1 x RJ11 port for voice services.
- Porty pro externí anténu: 2 x TS-9 ports for connecting optional external antennas to enhance signal reception.
- Příkon: Pro připojení napájecího adaptéru.
3.3 Horní a spodní panel
These panels typically feature ventilation grilles for heat dissipation and may include a reset button on the bottom.
4. Průvodce nastavením
Follow these steps to set up your ZTE G5 Air 5G CPE MC8510D:
- Vložte SIM kartu: Locate the SIM card slot on the rear panel. Gently insert your 4FF (Nano) SIM card into the slot until it clicks into place. Ensure the SIM card is correctly oriented.
- Připojte napájení: Connect the provided power adapter to the power input port on the device and then plug the adapter into a power outlet. The device will power on automatically.
- Umístěte zařízení: Place the CPE in an open area, preferably near a window, to ensure optimal 5G signal reception. Avoid placing it near large metal objects or other electronic devices that may cause interference. The 'Preferred Position' feature (see Section 5.4) can assist in finding the best location.
- Optional: Connect External Antennas: If you wish to enhance 5G signal reception, connect compatible TS-9 external antennas to the designated ports on the rear panel.
- Připojit zařízení:
- Wi-Fi: Look for the Wi-Fi network name (SSID) and password printed on a label on the device (usually on the bottom or back). Connect your Wi-Fi-enabled devices (smartphones, laptops, etc.) to this network.
- Ethernet: Connect an Ethernet cable from the 2.5GE or GE port on the CPE to your computer, router, or other wired network devices.
- Hlas: If using voice services, connect a standard telephone to the RJ11 port.
- Počáteční konfigurace (volitelné): For advanced settings, access the device's web interface by typing its IP address (e.g., 192.168.x.x) into a web browser on a connected device. Refer to the device label for the default IP address and login credentials. Alternatively, use the ZTE Smartlife APP for management.
5. Návod k obsluze
5.1 Připojení k Wi-Fi
Once powered on, the CPE broadcasts a Wi-Fi network. Use the SSID and password found on the device label to connect your wireless devices. The device supports Wi-Fi 7 (802.11be) for high-speed wireless connectivity across 2.4GHz and 5GHz bands.
5.2 Kabelová připojení
Utilize the 2.5GE and GE Ethernet ports for stable, high-speed wired connections to computers, gaming consoles, smart TVs, or other network devices.
5.3 Voice Functionality
Connect a standard analog telephone to the RJ11 port to make and receive calls over the 5G network, supporting VoNR, VoLTE, CSFB, and VoIP.
5.4 Speciální funkce
- NFC: For Android phones, simply touch the phone to the NFC area on the router to quickly connect to the Wi-Fi network without manually entering credentials.
- Zelený režim: Configure the device to save power through the web interface or ZTE Smartlife APP.
- Preferred Position: This feature helps users find the optimal placement for the CPE to achieve the best signal strength and network performance.
- Diagnostika zařízení: Provides real-time status of the device and offers solutions for identified issues.
- ZTE Smartlife APP: Manage your CPE settings, connected devices, and monitor network status conveniently from your smartphone.
6. Údržba
6.1 aktualizací firmwaru
The device supports firmware over-the-air (FOTA) and TR069 updates. Regularly check for and install the latest firmware to ensure optimal performance, security, and access to new features. This can typically be done through the web interface or the ZTE Smartlife APP.
6.2 Čištění a péče
- Keep the device in a clean, dry environment within the specified operating temperature and humidity ranges.
- Vnější povrch čistěte měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky ani aerosoly.
- Ujistěte se, že ventilační otvory nejsou blokovány, aby nedošlo k přehřátí.
6.3 Resetování zařízení
If the device is not functioning correctly, you may perform a factory reset. Locate the reset button (usually a small pinhole) on the device, typically on the bottom. Use a paperclip to press and hold the button for about 10 seconds until the indicators flash. This will restore the device to its factory default settings.
7. Řešení problémů
If you encounter issues with your ZTE G5 Air 5G CPE MC8510D, try the following solutions:
- Bez napájení: Ujistěte se, že je napájecí adaptér bezpečně připojen k zařízení i k funkční zásuvce. Zkontrolujte, zda je zásuvka funkční.
- No 5G/4G Signal:
- Ověřte, zda je SIM karta správně vložena a aktivní.
- Relocate the CPE to an area with better cellular signal, ideally near a window.
- Consider connecting external TS-9 antennas if signal strength is consistently low.
- Check the network bands supported by your SIM card provider against the device specifications.
- Žádné připojení k Wi-Fi:
- Ensure Wi-Fi is enabled on the CPE (check LED indicators).
- Ověřte, zda používáte správné SSID a heslo Wi-Fi.
- Restart the CPE and your Wi-Fi device.
- Check for any Wi-Fi isolation settings in the web rozhraní.
- Pomalá rychlost internetu:
- Check the 5G/4G signal strength.
- Ujistěte se, že žádná jiná zařízení nespotřebovávají nadměrnou šířku pásma.
- Restart the CPE.
- Update the device firmware to the latest version.
- Nelze přistupovat Web Rozhraní:
- Ujistěte se, že je vaše zařízení připojeno k CPE přes Wi-Fi nebo Ethernet.
- Ověřte, zda je IP adresa zadaná v prohlížeči správná.
- Zkuste vymazat mezipaměť prohlížeče nebo použít jiný prohlížeč.
- If you forgot the password, perform a factory reset (see Section 6.3).
8. Specifikace
8.1 Obecné
| Model | MC8510D |
| Značka | ZTE |
| Původ | pevninská Čína |
| Osvědčení | CE, FCC, RoHS |
| Aplikace | Domov, firma |
| S funkcí modemu | Ano |
8.2 Mobilní síť
| Vydání 3GPP | LTE R15; NR R16 |
| Síť | 5G NR SA&NSA, Support 5G NR CA, LTE FDD/TDD, UMTS |
| Modulace | Sub6G DL: 256QAM / UL: 256QAM, LTE DL: 256QAM / UL: 256QAM |
| Bandwidth (Sub6G) | 40 MHz, 50 MHz, 60 MHz, 80 MHz, 90 MHz, 100 MHz |
| Frequency Bands (5G SA+NSA) | n1/3/7/8/20/28/38/40/41/75/77/78 |
| Frequency Bands (4G LTE) | B1/3/7/8/20/28/32/38/40/41/42/43 |
| Frequency Bands (3G UMTS) | B1/2/5/8 |
| 2G pásma | Není podporováno |
| MIMO for Wireless | 5G+4G support 4MIMO |
| Default Antenna | Internal antenna for all bands |
| Antenna Gain (600-960MHz) | 1-1.5 dBi |
| Antenna Gain (1400-2700MHz) | 2-2.5 dBi |
| Antenna Gain (3300-5000MHz) | 4dBi/10dBi |
| External Antenna Port Bands | B38/40/41/42/43, N38/40/41/77/78 |
| Theoretical Max Rate (5G ENDC LTE FDD + Sub6G) | DL 3.86 Gb/s, UL 280 Mb/s |
| Theoretical Max Rate (5G SA) | DL: 4.29 Gb/s, UL: 320 Mb/s |
| Theoretical Max Rate (4G LTE FDD) | DL 1.6Gb/s, UL 200Mbp (CAT19/CAT18) |
| Theoretical Max Rate (4G LTE TDD) | DL 1.12Gb/s, UL 40Mb/s |
| Theoretical Max Rate (3G WCDMA CS) | UL 64kbps/DL 64kbps |
| Theoretical Max Rate (3G WCDMA PS) | UL 384kbps/DL 384kbps |
8.3 Síť Wi-Fi
| Norma | WiFi 7, 802.11b/g/n/a/ac/ax/be |
| Band & MIMO | 2*2 MIMO for both 2.4G&5G |
| Speed (2.4GHz) | 688 Mbps |
| Speed (5GHz) | 2882 Mbps |
| Total Aggregate Speed | Až 3570 Mbps |
| Bandwidth (2.4G) | 20M/40M |
| Bandwidth (5G) | 20M/40M/80M/160M |
| Modulace | 11be up to 4096QAM |
| Default Antenna | Internal antenna for all bands |
| Antenna Gain (2.4GHz) | 1.5 dBi |
| Antenna Gain (5GHz) | 2.5 dBi |
| Maximální počet připojených zařízení | Až do 128 |
8.4 Rozhraní
| RJ45 Interfaces | 1 x GE & 1 x 2.5GE |
| Rozhraní RJ11 | 1 |
| Rozhraní USB | 1 x Type-C USB3.1 |
| Porty pro externí anténu | 2 * TS-9 |
| USIM/SIM Slot | 4FF 3V/1.8V SIM card |
8.5 Environment Specifications
| Ochrana proti vniknutí | IP30 |
| Provozní teplota | 0-40 ℃ |
| Skladovací teplota | -40 až 70 °C |
| Vlhkost | 5% ~ 95% (nekondenzující) |
8.6 Softwarové funkce
- Režimy zařízení: Automatic (wireless/wire auto switch), Dual WAN, Hybrid, Wireless, Bridge, Cable Broadband
- IP Networking: IPv4/IPv6 dual stack (NDP IPv6), DHCP server, VPN pass-through (L2TP/PPTP/IPSec), VPN L2TP, VPN PPTP, VPN IPSec, VPN GRE, NAT/NAPT, Sip ALG, Multiple APNs
- Firewall: Port Forwarding, Port Filtering, Port Mapping, Domain Filtering, UPnP, DMZ, Remote Access/Ping switch, MAC address filtering
- Vlastnosti Wi-Fi: Wi-Fi Switch, Bandsteering, Security modes (WPA-PSK/WPA2-PSK, WPA2-PSK/WPA3-PSK, WPA2-PSK), Wi-Fi Broadcast, Wi-Fi Isolation, Auto channel selection, WPS, EasyMesh, GuestSSID support, Wi-Fi Sleep Mode
- Voice Features: VoNR, VoLTE, CSFB, VoIP
- Správa zařízení: Connected device Management, SMS, PIN/PUK management, APN management, Lock Frequency/Lock Cell, TR069 with TR181 data model default, Upgrade (FOTA/TR069), ZTE Smartlife APP, Multiple languages, Remote access on bridge mode
- Speciální vlastnosti: Green Mode, Preferred Position, NFC, Device Diagnosis, PC/Phone/PAD WebUI management self-adaptation, OpenWrt
9. Záruka a podpora
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the vendor/manufacturer directly. Keep your proof of purchase for warranty claims.
