Zavedení
This manual provides detailed instructions for the installation, operation, and maintenance of your Hagibis 2230 M.2 NVMe SSD Enclosure. Please read this manual thoroughly before using the product to ensure proper functionality and longevity.
The Hagibis M.2 NVMe SSD Enclosure features a unique floppy disk design, offering 10Gbps high-speed data transmission via USB 3.2 Gen 2. It is compatible with M.2 NVMe SSDs of 2230 and 2242 specifications and is built with an all-aluminum alloy shell for efficient heat dissipation. The enclosure is compact and lightweight, making it highly portable.
Obsah balení
Po vybalení zkontrolujte obsah balení:
- Hagibis M.2 NVMe SSD Enclosure (Model YPHN02)
- USB-C to USB-C Cable (approx. 150mm)
- Šroubovák / klíč
- Tepelná podložka
- Lanyard/Keychain
- Uživatelská příručka (tento dokument)
Specifikace
| Funkce | Detail |
|---|---|
| Název značky | Hagibis |
| Číslo modelu | YPHN02 |
| Typ rozhraní | USB 3.2 Gen 2 (10Gbps), M.2 (M Key, B&M Key) |
| Kompatibilní SSD disky | M.2 NVMe SSD (2230, 2242 sizes) |
| Maximální rychlost sekvenčního čtení | 1024 MB/s |
| Maximální rychlost sekvenčního zápisu | 1024 MB/s |
| Materiál | Hliníková slitina |
| Chladicí Fin | No (Aluminum alloy shell provides heat dissipation) |
| Typ zástrčky | USB-C |
| Rozměry (přibližně) | 68mm (Length) x 6.1mm (Thickness) |
| Hmotnost (přibližně) | 53 g |
| Kompatibilní zařízení | PC, Laptop, iPhone 17 Pro (for external recording) |
Průvodce nastavením
Pro instalaci disku M.2 NVMe SSD do skříně postupujte takto:
- Unscrew the Enclosure: Use the provided screwdriver to loosen the screws on the side of the enclosure.
- Otevřete kryt: Carefully remove the top cover of the enclosure.
- Vložte SSD disk: Align your M.2 2230 or 2242 NVMe SSD with the M.2 slot inside the enclosure. Gently push the SSD into the slot at a parallel angle until it is fully seated.
- Zabezpečení SSD disku: Use the small screw provided to secure the SSD in place.
- Apply Thermal Pad (Optional but Recommended): Place the thermal pad over the SSD chip to aid in heat dissipation.
- Zavřete kryt: Replace the top cover and tighten the screws to secure the enclosure.
Důležitá poznámka:
- Only supports SSDs with single-sided particles and a thickness of less than 2.5mm.
- The product does not include sticky notes for DIY customization. The thickness of the DIY card slot is 0.5mm.
Operace
- Připojit k zařízení: Use the provided USB-C to USB-C cable to connect the SSD enclosure to your computer, laptop, or compatible smartphone (e.g., iPhone 17 Pro).
- Přístup k úložišti: Once connected, your operating system should automatically detect the SSD enclosure as an external storage device. You can then access, transfer, and manage filestejně jako u jakéhokoli jiného externího disku.
- Vysokorychlostní přenos dat: The USB 3.2 Gen 2 interface supports data transfer speeds up to 10Gbps, allowing for fast reading and writing of large files.
- External Recording (for compatible devices): For devices like the iPhone 17 Pro Max, the enclosure can be used for direct external recording in 4K/120Hz ProRes.
Údržba
- Udržujte kryt čistý a bez prachu. K čištění používejte měkký, suchý hadřík.
- Nevystavujte zařízení extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
- Do not drop or subject the enclosure to strong impacts, as this may damage the internal SSD or the enclosure itself.
- Ensure proper ventilation when in use, although the aluminum alloy design aids in heat dissipation.
Odstraňování problémů
- Zařízení nebylo rozpoznáno:
- Ensure the USB-C cable is securely connected to both the enclosure and your device.
- Zkuste se připojit k jinému portu USB-C na počítači.
- Test with a different USB-C cable to rule out cable issues.
- Verify that the M.2 SSD is correctly installed and secured inside the enclosure.
- Check your computer's Disk Management (Windows) or Disk Utility (macOS) to see if the drive is detected but unformatted. If so, format the drive.
- Pomalé přenosové rychlosti:
- Ensure your device's USB-C port supports USB 3.2 Gen 2 (10Gbps) for optimal performance. Older USB versions will result in slower speeds.
- Confirm that the SSD itself is capable of high read/write speeds.
- Vyhněte se přenosu velkého množství malých files simultaneously, as this can reduce overall transfer rates.
- Enclosure gets warm during use:
- It is normal for the aluminum alloy enclosure to become warm during high-speed data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly installed on the SSD.
- Avoid placing the enclosure on soft surfaces that might block airflow.
- Issues with external video recording (e.g., with iPhone):
- Some SSD brands, like WD, may have high power consumption which can lead to dropped recordings. It is recommended to use an SSD from another brand if you encounter this issue.
- Ensure your iPhone model supports external ProRes recording.
Tipy pro uživatele
- For maximum portability, utilize the included lanyard/keychain to attach the enclosure to your bag or keys.
- The enclosure features a slot for DIY sticky notes (0.5mm thick) to personalize its appearance.
- Consider using magnetic patches (not included) to attach the enclosure to compatible devices like smartphones for convenient external storage during mobile use.
Záruka a podpora
Hagibis products are designed for reliability and performance. For any issues or inquiries, please contact Hagibis customer support.
- Certifikovaný originál: Tento produkt je certifikovaný originál.
- Zabezpečení a soukromí: Hagibis ensures safe payments and secure personal details, not sharing them with third parties without consent.
