Qianxun Q600 GNSS RTK Receiver User Manual

1. Úvod

The Qianxun Q600 is a high-accuracy handheld GNSS RTK receiver designed for professional land surveying applications. It features 1520 channels, supports multiple satellite systems (BDS, GPS, GLONASS, GALILEO, QZSS, SBAS), and integrates an IMU for tilt compensation, ensuring precise and efficient data collection in various field conditions.

2. Obsah balení

Before starting, please verify that all items listed below are present in your package. Refer to the unboxing video for a visual guide.

• Qianxun Q600 GNSS Receiver (x1)
  

  The main Q600 GNSS Receiver unit.
• Handheld Data Controller (x1)
  

  The handheld data controller for operating the Q600 system.

• Držák (x1)
  

  Mounting bracket for the Q600 receiver.
• Dual Charging Plug (x1)
  

  Dual slot charging plug for the receiver batteries.

• Nabíječka (x1)
  

  USB wall charger for the system components.

• USB kabel (x1)
  

  USB data and charging cable.
• Leveling Shoe (x1)
  

  Leveling shoe for precise setup of the surveying pole.

• Konektor (x1)
  

  Connector for attaching components.

• Baterie (2x)
  

  Removable batteries for the Q600 receiver.
• UHF Antenna (x1)
  

  UHF antenna for radio signal reception.

3. Nastavení

3.1 Počáteční nabíjení

1. Insert the removable batteries into the dual charging plug.
2. Connect the dual charging plug to the charger using the provided USB cable.
3. Plug the charger into a power outlet. Ensure the batteries are fully charged before first use. The Q600 supports an external power supply of 9-20V DC.

3.2 Assembling the Receiver

1. Attach the bracket to your surveying pole.
2. Secure the Q600 GNSS Receiver onto the bracket.
3. Connect the UHF antenna to the SMB interface on the Q600 receiver for radio communication.
4. Ujistěte se, že jsou všechna připojení bezpečná.

3.3 Nastavení ručního ovladače

1. Power on the handheld data controller.
2. The controller runs on Android 9. Follow on-screen prompts for initial setup.
3. Connect the controller to the Q600 receiver via Bluetooth or Wi-Fi as per the software instructions.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Zapnutí: Press and hold the power switch button on the Q600 receiver until the indicators light up.
• Vypnout: Press and hold the power switch button until the device powers down.

4.2 Kontrolky

The Q600 receiver features indicators for Satellite, Power, and Signal status. Refer to the device's specific LED patterns for detailed status information.

4.3 Provoz GNSS

• The Q600 supports BDS, GPS, GLONASS, GALILEO, QZSS, and SBAS satellite systems across 1520 channels.
• For RTK measurements, ensure proper base station setup and communication.
• The system provides static accuracy of ± (2.5+0.5×10-6D) mm horizontally and ± (5+0.5×10-6D) mm vertically.
• RTK accuracy is ± (8+1×10-6D) mm horizontally and ± (15+1×10-6D) mm vertically.
• Initialization reliability is 99.90%.

4.4 IMU Functionality

• The integrated IMU allows for tilt compensation up to a tilt slope of 0~60°.
• Tilt compensation accuracy is 8 mm + 0.3 mm/°tilt (accuracy < 2 cm within 30°).
• The IMU operates at a rate of 200 Hz.
• The system automatically calculates centering rod height and provides centering rod tilt error calibration.

4.5 Global High-Precision Service (XStar)

• The Q600 supports XStar L-band satellite-based service for enhanced accuracy.
• XStar accuracy is ± 2.5 cm horizontally and ± 15 cm vertically.
• Time of initialization for XStar service is typically less than 15 minutes.

4.6 Bezdrátová komunikace

• Bluetooth/Wi-Fi: Supported for connection to the handheld controller and other devices.
• Rádio: Features a built-in receiving radio with a frequency band of 415 MHz – 460 MHz.
• Rádiový protokol: Supports TrimTalk450S, TrimMark3, and Transparent transmission protocols.
• Radio Transmit Power: 2 W.

4.7 Výstup dat

• NMEA data output is supported through both physical interfaces and Wi-Fi.

Image: Qianxun Q600 GNSS RTK Receiver mounted on a surveying pole.

Image: A surveyor operating the Q600 GNSS RTK system with the handheld controller.

5. Údržba

• Čištění: Regularly clean the receiver and controller with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• Ochrana životního prostředí: The Q600 receiver is rated IP67 for waterproof and dustproof performance. While robust, avoid prolonged submersion or exposure to extreme conditions.
• Odolnost vůči nárazu: The device is resistant to falls from a height of 2 meters. However, always handle with care to prevent damage.
• Péče o baterie: The removable dual batteries (6800mAh) provide approximately 14 hours of operation for the rover station. Store batteries in a cool, dry place and recharge them regularly to maintain optimal performance, even when not in use.
• Aktualizace softwaru: Periodically check for firmware and software updates for both the receiver and the handheld controller to ensure optimal performance and access to new features.

6. Řešení problémů

This section provides solutions to common issues you might encounter with your Qianxun Q600 GNSS RTK Receiver.

6.1 Obecné otázky

• Zařízení se nezapíná: Ensure batteries are fully charged and correctly inserted. Check external power supply if applicable.
• No satellite signal: Ujistěte se, že má přijímač volný view of the sky, free from obstructions. Verify antenna connection.
• RTK fix not achieved: Check communication with the base station (radio or network). Ensure correction data is being received. Verify base station setup and coordinates.
• Ovladač se nepřipojuje: Ensure Bluetooth/Wi-Fi is enabled on both the receiver and controller. Re-pair devices if necessary.

6.2 Chybové zprávy

If specific error messages appear on the controller, consult the software's help documentation or contact technical support with the exact error code.

7. Specifikace

8. Uživatelské tipy

• Optimální satelitní příjem: Always ensure the Q600 receiver has an unobstructed view of the sky for the best satellite signal reception and accuracy. Avoid operating near tall buildings, dense foliage, or large metal structures.
• Správa baterie: Carry spare charged batteries for extended fieldwork. Monitor battery levels on the handheld controller to avoid unexpected power loss during critical measurements.
• Znalost softwaru: Take time to familiarize yourself with the surveying software on the handheld controller. Understanding its features and workflows will significantly improve efficiency.
• Kalibrace: Perform IMU calibration regularly, especially after significant temperature changes or impacts, to maintain tilt compensation accuracy.
• Záloha dat: Regularly back up your survey data from the handheld controller to prevent data loss.

9. Záruka a podpora

The Qianxun Q600 GNSS RTK Receiver comes with a 1-3 year warranty on hardware. We provide remote technical support globally and long-term after-sales service.

For technical assistance or warranty claims, please contact our support team:

• WhatsApp: +86 19373185636