1. Úvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Anern 5KW or 6.5KW Hybrid Solar Inverter. This high-frequency inverter features a pure sine wave AC output, MPPT solar charging, and dual AC output capabilities. It is designed to integrate solar power with utility grids and can operate with or without a battery, supporting both lithium and lead-acid battery types.
Figure 1: Anern FGI-S5000 Hybrid Solar Inverter
2. Klíčové vlastnosti
- Rated power 5.0KW/5.0KVA (AN-FGI-S5000) or 6.5KW/6.5KVA (AN-FGI-S6500), with a power factor of 1.
- MPPT (Maximum Power Point Tracking) range: 60V~450V, 500Voc.
- High-frequency inverter design for small size and light weight.
- Pure sine wave AC output for sensitive electronics.
- Capable of powering loads simultaneously from solar and utility grid.
- Equipped with CAN/RS485 for Battery Management System (BMS) communication.
- Ability to operate without a battery (batteryless mode).
- Volitelné vzdálené monitorování přes WiFi.
- Dual AC output for flexible load management.
- Feed-in to grid functionality.
3. Konec produktuview
The inverter features a user-friendly interface and clearly labeled connection ports.
3.1 Přední panel a displej
Obrázek 2: Přední panelview
- Indikátor AC
- Invert Indicator
- Indikátor nabíjení
- Indikátor poruchy
- LCD displej
- Tlačítko ESC
- Tlačítko nahoru
- Tlačítko dolů
- Tlačítko Enter
- Světlo RGB
Světelné režimy RGB:
- Standby mode: White
- Battery mode: Red
- City electricity mode: Blue
- PV mode: Orange
3.2 Zadní panel a připojení
Obrázek 3: Připojení na zadním panelu
- AC vstup: Utility grid input.
- Hlavní výstup: Primary AC output for rated power loads.
- Druhý výstup: Secondary AC output for loads up to one-third of the rated power.
- WiFi: Port for optional WiFi remote monitoring module.
- BMS: Communication port for Battery Management System (RJ45).
- BAT+/-: Battery connection terminals.
- PV In: Solar panel input terminals.
- ON/OFF: Vypínač.
4. Specifikace
| Parametr | AN-FGI-S5000 | AN-FGI-S6500 |
|---|---|---|
| AC vstup | ||
| Jmenovitý vstupní objemtage (VAC) | 208/220/230/240; L+N+PE | |
| svtage Range (VAC) | 90~280 (APP mode); 170~280 (UPS mode) | |
| Frekvence (Hz) | 50/60 (Auto Adaptive) | |
| AC výstup | ||
| Rated Capacity (kW) | 5 (Output Power rating will be reduced to 90%, when setting the Output Voltage na 208V) | 6.5 (Output Power rating will be reduced to 90%, when setting the Output Voltage na 208V) |
| Surge Power (kVA) | 10 | 12 |
| svtage (VAC) | 208/220/230/240 | |
| Power Factor (PF) | 1 | |
| Frekvence (Hz) | 50/60±0.1 % | |
| Doba přepnutí (ms) | 10 (APP/UPS mode)/ 20 (GEN mode) | |
| WaveForm | Čistá sinusová vlna | |
| Overload Capacity (Battery Mode) | 1min@102%~120% load, 10s@ >120% load | |
| Max. Efficiency (Battery Mode) | 93.5%@24V | 94%@48V |
| Charger (PV/AC) | ||
| Typ solární nabíječky | MPPT | |
| Max PV Input Current/Power | 27A/9000W | |
| MPPT Range@Operating Voltage (VDC) | 60~450 | |
| PV Start-up Voltage | 60 V DC | |
| Max PV Open Circuit Voltage (VDC) | 500 | |
| Max PV Charge Current (A) | 160 | 120 |
| Max AC Charge Current (A) | 160 | 120 |
| Max. Charge Current (PV+AC) (A) | 160 | 120 |
| Baterie | ||
| Normální svtage (VDC) | 24 | 48 |
| Typ baterie | Lithium and Lead-acid | |
| Obecné údaje | ||
| HMI | LCD | |
| Rozhraní | RS485/CAN/RS232 | |
| Sledování | WiFi (volitelné) | |
| Environmentální | ||
| Ochrana proti vniknutí | IP21 | |
| Provozní teplota | -10℃~60℃ | |
| Relativní vlhkost | 5% ~ 95% (nekondenzující) | |
| Skladovací teplota | -15℃~60℃ | |
| Max. Provozní nadmořská výška | 4000m (Derating above 1000m) | |
Tabulka 1: Technické specifikace
5. Nastavení a instalace
5.1 Schéma systému
The following diagram illustrates a typical hybrid solar energy storage system setup:
Figure 4: Hybrid Solar Energy Storage System Diagram
This diagram shows the connection of solar panels, grid, generator, inverter, battery (lithium/lead-acid), and home loads, with cloud and app monitoring capabilities.
5.2 Batteryless Mode
The inverter supports a batteryless mode, allowing it to power loads directly from PV/AC sources without a connected battery. This offers a simpler, plug-and-play wiring solution compared to traditional battery-dependent systems.
Figure 5: Batteryless Mode Operation
5.3 Battery Connection and Type Selection
The inverter is compatible with both lithium and lead-acid batteries. When connecting a lithium battery, ensure compatibility with the inverter's communication protocol via the RJ45 BMS port.
Figure 6: Selectable Battery Types
The inverter supports the following battery types, configurable via the display:
- AGM (výchozí)
- FLD (Zaplavený)
- LIB (Lithium Ternary Battery)
- FEL (Lithium Iron)
- CUS (User-Defined)
For lithium battery connections, verify the compatibility of the battery's protocol with the inverter. There are two connectors on the lithium battery: an RJ45 port for BMS communication and a power cable.
5.4 Dual AC Output
The inverter provides two AC outputs:
- Hlavní výstup: Designed for connecting to a rated power load.
- Druhý výstup: Can be connected to a load of up to one-third of the rated power.
6. Provoz
6.1 Solar Charging Priority Modes
The inverter offers flexible solar charging priority settings to optimize energy usage:
Figure 7: Solar Charging Priority Options
- Solární energie na prvním místě: Solar energy is prioritized to charge the battery. The utility grid will only charge the battery if solar energy is unavailable.
- Solární energie a energie: Both solar energy and the utility grid will charge the battery simultaneously.
- Only Solar Charging: Solar energy is the exclusive charging source, regardless of utility availability.
These modes can be configured via the inverter's LCD display or optional WiFi monitoring application.
7. Údržba
To ensure optimal performance and longevity of your Anern Hybrid Solar Inverter, regular maintenance is recommended:
- Čištění: Keep the inverter's exterior clean and free from dust and debris. Ensure ventilation openings are unobstructed.
- Spojení: Pravidelně kontrolujte všechna elektrická připojení (FV, baterie, AC vstup/výstup), zda jsou pevná a zda nejeví známky koroze.
- Prostředí: Ensure the inverter is operating within its specified temperature and humidity ranges. Avoid exposure to direct sunlight or excessive moisture.
- Aktualizace firmwaru: If available, consider updating the inverter's firmware via the optional WiFi module to benefit from performance improvements and new features.
8. Řešení problémů
This section provides guidance on common issues you might encounter:
- Bez napájení/Vypnutí displeje: Check AC input, battery connections, and the ON/OFF switch. Ensure sufficient PV input if operating in solar-only mode.
- Indikátor poruchy zapnutý: Refer to the inverter's display for specific error codes. Common faults include over-voltage, pod-voltage, overload, or short circuit. Address the underlying cause before restarting.
- Nízký výstupní výkon: Ověřte vstupní objem FV panelutage and current are within specifications. Check battery charge level and health. Ensure loads do not exceed the inverter's rated capacity.
- Baterie se nenabíjí: Check PV panel connections and ensure sufficient sunlight. Verify AC input if utility charging is enabled. Confirm battery type settings are correct.
- BMS Communication Issues: Ensure the RJ45 cable is securely connected and the lithium battery's protocol is compatible with the inverter.
For persistent issues, consult a qualified technician or contact customer support.
9. Uživatelské tipy
- Kompatibilita baterie: The inverter is suitable for LiFePo4 batteries, as it supports both Lithium and Lead-acid types. Always ensure the specific battery's BMS protocol is compatible.
- PV vstupní proud: The inverter is designed to handle a maximum PV input current of 27 Amperes, as indicated in the specifications (Max PV Input Current/Power: 27A/9000W).
- Sledování: Utilize the optional WiFi module for remote monitoring to keep track of your system's performance and settings from anywhere.
10. Záruka a podpora
For warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact Anern customer service. Keep your purchase receipt as proof of purchase.
Obrázek 8: Certifikace produktů
