1. Úvod
The JK-P10 Paper Moisture Meter is a high-precision, portable instrument designed for quick and accurate measurement of moisture content in various paper and cardboard products. Utilizing high-frequency electromagnetic scanning, it provides stable performance and reliable readings, making it an essential tool for quality control and material inspection.
2. Součásti a rozměry produktu
Familiarize yourself with the main components of your JK-P10 Moisture Meter:
- Inductive Probe: The sensing element that measures moisture.
- Displej: LCD digital display for showing moisture readings.
- Knoflík pro nastavení nuly: Used to calibrate the meter to zero.
- Tlačítko ON/OFF: Zapne nebo vypne zařízení.
- Gear/Range Knob: Selects the appropriate measurement range (0-10).
Rozměry:
- Délka: 185 mm
- Width (top): 65 mm
- Width (bottom): 63 mm
- Probe Width: 31 mm
3. Nastavení
- Instalace baterie: Open the battery compartment and insert a 9V (6F22 type) battery, ensuring correct polarity.
- Zapnutí: Press the "ON/OFF" key to turn on the device. The LCD display should light up.
- Nulová kalibrace: Before taking measurements, ensure the meter is calibrated to zero. With no material under the probe, turn the "Zero Adjustment Knob" until the display reads "00.0" or as close to zero as possible.
4. Návod k obsluze
- Vyberte rozsah: Use the "Gear/Range Knob" to select an appropriate range (0-10) for the material being tested. Start with a lower range and adjust as needed.
- Umístěte sondu: Gently place the inductive probe flat against the surface of the paper or cardboard material you wish to measure. Ensure full contact between the probe and the material.
- Měření odečtu: The moisture content will be displayed on the LCD screen within approximately 1 second.
- Repeat Measurements: For best accuracy, take several measurements at different points on the material and average the results.
- Vypnout: After use, press the "ON/OFF" key to turn off the device to conserve battery life.
5. Údržba
- Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Skladování: Store the meter in a dry, cool place away from direct sunlight and extreme temperatures.
- Výměna baterie: If the display becomes dim or the meter does not power on, replace the 9V battery. Remove the battery if the device will not be used for an extended period to prevent leakage.
- Péče o sondu: Keep the inductive probe clean and free from debris to ensure accurate readings.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Měřič se nezapne. | Vybitá nebo nesprávně nainstalovaná baterie. | Zkontrolujte polaritu baterie nebo ji vyměňte za novou 9V baterii. |
| Nepřesné údaje. |
|
|
| Displej je tlumený nebo bliká. | Nízká kapacita baterie. | Vyměňte 9V baterii. |
7. Specifikace
| Parametr | Hodnota |
|---|---|
| Rozsah měření | 0–100 % |
| Rezoluce | 0.1 % |
| Čas měření | 1 sekunda |
| Přesnost | 0.5 % |
| Hloubka skenování | 50 mm |
| Výběr rozsahu | 0-10 gears/ranges |
| Pracovní princip | High-frequency electromagnetic scanning |
| Provozní prostředí | -40°C až +60°C |
| Metoda zobrazení | LCD digitální displej |
| Napájení | 9V (6F22 type) battery |
| Rozměry (D x Š x V) | 185 mm x 63 mm x 32 mm |
| Hmotnost | 200 gramů |
8. Uživatelské tipy
- For consistent results, always perform zero calibration before each measurement session or if the ambient conditions change significantly.
- When measuring, ensure the probe is placed firmly and evenly on the material to avoid air gaps that could affect accuracy.
- If measuring very thin materials, stacking multiple layers might provide a more stable reading, but remember to consider the material's density.
9. Záruka a podpora
This product is typically covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or manufacturer directly.
Keep your purchase receipt or order number handy when contacting support.
