1. Úvod
This manual provides essential information for the safe and efficient operation of your SRNE SPI-6.5K-UP 6.5kW Split Phase 120/240V Off-Grid Solar Inverter. Please read this manual thoroughly before installation and operation to ensure proper use and to prevent potential hazards. Keep this manual for future reference.
2. Bezpečnostní informace
WARNING: This inverter generates high voltage. Improper installation or operation can result in serious injury or death. Only qualified personnel should perform installation and maintenance.
- Always disconnect all power sources (PV array, battery, utility) before servicing the inverter.
- Zajistěte správné uzemnění střídače.
- Neprovozujte měnič, pokud je poškozený nebo se zdá být vadný.
- Udržujte děti mimo dosah měniče.
- Install the inverter in a well-ventilated area, away from flammable materials.
- Observe all local electrical codes and regulations.
3. Konec produktuview
The SRNE SPI-6.5K-UP is a 6.5kW split-phase off-grid solar inverter designed to convert DC power from solar panels and batteries into AC power for household use. It features a pure sine wave output, high efficiency, and multiple protection functions.
3.1. Součásti měniče
The inverter unit includes a front display for monitoring system status and settings, various connection ports on the rear for AC input/output, battery, and PV array, and ventilation grilles for cooling.
4. Specifikace
| Položka | Hodnota |
|---|---|
| Číslo modelu | SPI-6.5K-UP |
| Vstupní objemtage (PV) | 150~450Vdc |
| Výstupní objemtage | 120/240 V AC (s rozdělenou fází/jednofázové) |
| Výstupní proud | 80A |
| Výstupní frekvence | 50/60 Hz |
| Typ výstupu | Rozdělit fázi |
| Velikost (D*Š*V) | 584.6*410*133 mm |
| Typ | DC/AC měniče |
| Účinnost měniče | 99.90 % |
| Hmotnost | 18.9 kg |
| Průběh | Čistá sinusová vlna |
| Přepnout čas | 10 ms (obvykle) |
| Typ baterie | Li-ion / Olovo / Uživatelsky definované |
| Baterie Voltage | 48 V DC |
| Baterie Voltage Dosah | 40-60 Vdc |
| Rozsah provozních teplot | −10°C−55°C, >45°C derating |
| Hluk | <60dB |
| Vestavěná rozhraní | RS485 / CAN / USB / Suchý kontakt |
| Počet sledovačů MPP | 2 |
| Max. Síla PV pole | 10,000W |
| Ochrana | IP20 |
| Funkce | Energy Saving Solar Inverter |
| Osvědčení | CE/IEC |
5. Instalace
Proper installation is crucial for the safety and performance of your inverter. It is highly recommended that installation be performed by a certified electrician or solar professional.
5.1. Výběr lokality
- Vyberte chladné, suché a dobře větrané místo.
- Avoid direct sunlight, high temperatures, and humidity.
- Zajistěte dostatečný volný prostor kolem měniče pro správné proudění vzduchu a odvod tepla.
- Mount the inverter vertically on a sturdy wall or rack.
5.2. Připojení vodičů
Refer to Figure 3.5 for the location of connection ports. All wiring must comply with local and national electrical codes.
- Základy: Connect the inverter to a reliable earth ground.
- Připojení baterie: Connect the battery bank to the BAT+ and BAT- terminals. Ensure correct polarity.
- Připojení FV panelu: Connect the solar panel strings to the PV1 and PV2 input terminals. Observe correct polarity and ensure the PV voltage is within the specified input range (150~450Vdc).
- Připojení výstupu střídavého proudu: Connect your load center or main electrical panel to the AC OUT terminals. This inverter provides 120/240Vac split-phase output.
- Připojení AC vstupu (volitelné): If using a generator or utility grid as a backup, connect it to the AC IN terminals.
- Komunikační porty: Connect RS485, CAN, USB, or Dry contact cables as required for monitoring or external control.
CAUTION: Double-check all connections before powering on the inverter. Incorrect wiring can cause damage to the inverter and connected equipment.
6. Provoz
6.1. Počáteční spuštění
- After all connections are secure, switch on the battery breaker.
- Switch on the PV array disconnect switch.
- Turn the ON/OFF switch on the inverter (refer to Figure 3.5) to the 'ON' position.
- The inverter will perform a self-test and the display will show the operating status.
- If an AC input source is connected, switch on its breaker.
6.2. Displej a nastavení
The front display provides real-time information such as input voltage, výstupní objemtage, battery status, and error codes. Use the buttons adjacent to the display to navigate through menus and adjust settings. Consult the detailed operational guide (usually a separate document or advanced section of the full manual) for specific menu navigation and parameter adjustments, including battery type selection (Li-ion / Lead-Acid / User Defined).
6.3. Postup vypnutí
- Turn off the AC output breaker to disconnect loads.
- If an AC input source is connected, turn off its breaker.
- Turn the ON/OFF switch on the inverter to the 'OFF' position.
- Switch off the PV array disconnect switch.
- Switch off the battery breaker.
7. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho měniče.
- Čištění: Periodically clean the exterior of the inverter and ventilation openings to prevent dust buildup. Use a dry, soft cloth. Do not use liquid cleaners.
- Spojení: Každoročně kontrolujte všechny elektrické spoje, zda nejsou těsné a zda nevykazují známky koroze.
- Prostředí: Zajistěte, aby teplota a vlhkost vzduchu v instalačním prostředí zůstaly v rámci specifikovaného rozsahu.
- Firmware: Zkontrolujte výrobce webwebové stránky s dostupnými aktualizacemi firmwaru.
WARNING: Before performing any maintenance, ensure the inverter is completely shut down and all power sources are disconnected.
8. Řešení problémů
This section covers common issues you might encounter. For more complex problems, contact technical support.
| Problém | Možná příčina | Řešení |
|---|---|---|
| Měnič se nezapíná | No battery power; Inverter switch OFF; Loose connections | Zkontrolujte objem baterietage; Ensure inverter switch is ON; Verify all connections are secure. |
| Žádný AC výstup | Přetížení; Zkrat; Nízká kapacita baterietage; Porucha invertoru | Reduce load; Check for short circuits; Charge battery; Check display for error codes. |
| Low PV charging current | Shaded panels; Dirty panels; Incorrect PV wiring; Low solar irradiance | Clear shading; Clean panels; Verify PV wiring and voltage; This may be normal on cloudy days. |
| Inverter making unusual noise | Overload; Fan malfunction; Internal fault | Reduce load; Check fan operation; If noise persists, contact support. |
9. Uživatelské tipy
Z poskytnutých informací nebyly k dispozici žádné konkrétní tipy pro uživatele.viewnebo obsah otázek a odpovědí.
10. Záruka a podpora
For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Ensure you have your product model number (SPI-6.5K-UP) and serial number ready when contacting support.





