Uživatelská příručka k autokameře DDPAI Dash Cam Z50 Pro 4K

1. Představení produktu

1.1 Vzhled

The DDPAI Z50 Pro Dash Cam features a compact design with a 3.0-inch IPS display. Below is an overview of its components:

1.2 funkční tlačítka

The Dash Cam features several function buttons for easy navigation and control:

• Resetovat: Hold the confirm button for 6 seconds.

1.3 Indicator Guide

The indicator light provides visual feedback on the Dash Cam's status:

1.4 Specifikace

Key technical specifications of the DDPAI Z50 Pro Dash Cam:

2. Pokyny k nastavení

2.1 Instalace paměťové karty

Ensure the Dash Cam is not powered on before installing or removing the memory card.

• Instalovat: Insert the memory card halfway in (refer to the silkscreen pattern beside the slot) and push it inward until it clicks and locks.
• Odstranit: Gently push the card's edge inward until it clicks and pops out, then pull it out.

Poznámka:

• Use a branded Micro-SD card (up to 512GB).
• Format the card before first use for smooth operation.
• Do not remove the card while the Dash Cam is on.

2.2 Instalace Dash Cam

The Dash Cam can be installed using various power methods. For detailed wiring instructions, you can scan the QR code below:

Napájecí zdroj zapalovače cigaret

1. Wipe the front windshield: Ensure the surface is clean for firm bracket adhesion.
2. Power on the Dash Cam: Connect the car charger to the cigarette lighter and the Dash Cam using the Type-C power cord. The Dash Cam will start automatically when the car is powered on.
3. Determine installation position and adjust lens angle: Connect the Dash Cam to your mobile phone via the DDPAI App. In the app, go to "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS installation position" to calibrate.

4. Stabilize the Dash Cam: Attach the electrostatic sticker to the chosen position. Peel off the 3M sticker film from the bracket and stick it to the center of the electrostatic sticker.
5. Zapojení: Route the power cord from the cigarette lighter receptacle to the Dash Cam, hiding it in the car's plastic guard plate using a crowbar.

Připojte pojistkovou skříň (je vyžadována inteligentní sada pevných vodičů)

This method provides a neat installation and enables parking monitoring. Due to complexity, professional installation is recommended to avoid vehicle damage.

• Poznámka: The intelligent hardwire kit must be purchased separately or as part of a package including the step-down cable.

Connect the OBD Interface (OBD Power Cable is Required)

This method is easy to operate and supports parking monitoring.

1. Plug the Type-C connector of the OBD power cable into the Dash Cam's Type-C port.
2. Connect the other end of the OBD power cable to the vehicle's OBD port.

• Poznámka: The OBD power cable needs to be purchased separately. The OBD interface location varies by vehicle model.

2.3 Connect the Rear Camera (Optional)

If your package includes a rear camera, follow these steps for installation:

1. Clean the rear windshield where the camera will be installed.
2. Connect the rear camera to its power cable.
3. Insert the rear power cable fully into the headphone jack on the main Dash Cam unit.

• Poznámka: Ensure the power cable is fully plugged in; otherwise, the rear camera indicator will not light up, and the camera will not function.

4. Route the rear power cable from the Dash Cam to the rear camera.
5. Remove the red backing film from the adhesive sticker, adjust the rear camera's field of view, and fix it to the inner wall of the rear windshield.

• Poznámka: Install the rear camera in the direction indicated on the sticker, with the lens facing the rear windshield.

3. Připojení aplikace

The DDPAI App allows you to control and manage your Dash Cam. The app is continuously updated, so actual operations may vary slightly from this guide.

3.1 Downloading DDPAI App

Scan the QR code or search for "DDPai" in your device's app store (Google Play Store for Android, App Store for iOS) to download.

3.2 Připojení Bluetooth

1. Zapněte zařízení: Follow the on-screen instructions to select language and confirm.

2. Power on the Dash Cam: Zapněte na svém mobilním telefonu Bluetooth.
3. Launch DDPAI App: Tap "Device" > "+ Add a device".
4. Vyberte zařízení: Choose the Dash Cam's device name (e.g., DDP17XXXX) from the Bluetooth device list.
5. Povolit: Press the confirm button on the Dash Cam to authorize the connection.

• Poznámka: The device connects to one phone at a time. To connect a different phone, turn off Bluetooth on the connected phone, remove the device from the app, or reset the device.

3.3 Wi-Fi připojení

After Bluetooth connection, connect via Wi-Fi to view albums, adjust settings, or access the preview rozhraní.

Pro iPhony:

1. Tap "Go to connection" > "WLAN".
2. Select "DDPAI_Z50Pro_XXXX", enter the default password (1234567890), and tap "Join".

Pro telefony Android:

1. Launch the DDPAI app, go to "Device" page, tap "+ Add a device", then "Device with screen".
2. Tap "Next" > "Connect to Wi-Fi".
3. Select "DDPAI_Z50Pro_XXXX" from the Wi-Fi list, enter the default password (1234567890), and tap "Connect".

4. Device Interface Introduction

4.1 Spouštěcí obrazovka

Upon powering on, the device displays a boot screen. Follow on-screen instructions for initial setup.

4.2 Domovská obrazovka

After booting, the main interface shows the status bar, real-time preview, and function buttons.

• Stavový řádek: Displays recording status, date, time, 4G signal, GPS, audio recording, etc.
• Pre-real-time preview plocha: Shows live video.
• Function button area: Access album, settings, recording control, screen control, or lens switch.

4.3 Rozhraní nastavení

Press the Settings button on the main interface to access various recorder parameters.

4.4 Album Interface

Press the Album button to view recorded video or image files.

4.5 Device Icon Description

A guide to the icons displayed on the Dash Cam screen:

5. Návod k obsluze

5.1 Funkce videa

5.1.1 Preview Video

Můžete předemview video directly on the device or through the DDPAI App.

• Na zařízení: Video is displayed on the Dash Cam's screen.
• On App: After connecting to the Dash Cam, enter the real-time preview interface. Tap the Landscape Preview icon or rotate your phone horizontally to switch to full-screen preview.

• Poznámka: Předview quality is standard; download for HD quality.

5.1.2 Přehrávání videa

Playback recorded videos on the device or via the app.

• Na zařízení: Press the Album button, then select a video file hrát.
• On App: V reálném čase předview interface, drag the progress bar to select a time, or tap a thumbnail to play.

• Poznámka: Color-coded timelines indicate video types: Red for emergency events, Yellow for parking monitoring.

5.1.3 Download Video

Stáhnout video files to your mobile phone.

• Method 1 (from playback): During playback, drag the progress bar to select a starting point, tap the download icon, then "Complete".
• Method 2 (from album): On the "Device" interface, tap the Album icon. Hold the desired video/photo file to enter selection mode, then select and tap "Download".

• Poznámka: Video lengths range from 5 seconds to 3 minutes.

5.2 Fotografování

The Dash Cam supports various photography modes:

• Snímání kolize: Automatically takes pictures upon collision or emergency braking.
• Manuální: Zadejte předview, tap the camera icon to take a photo.
• Hlas: Say "Take photo" to the Dash Cam MIC.

• Poznámka: Collision and voice photography generate associated videos (default 10 seconds) saved in the "Snap"/"Emergency" tab of the "Device Album".

5.2.1 View Album zařízení

View captured photos and videos directly on the device or via the app.

• Na zařízení: Press the Album button.
• On App: Launch DDPAI App, tap "Device Album" on the "Device" interface.

• Poznámka: Files are stored on the recorder's memory; connect via app to view/stažení.

5.2.2 View Místní album

Downloaded photos/videos are stored on your phone. Launch the app, tap "Local Album" on the "Device" interface to view them without connecting to the Dash Cam.

Automatické stažení snímku/nouzového stavu files:

In the app, go to "Me" > "APP Settings", and enable "Automatically download snapshot files" / "Automatically download emergency files" to automatically save these files to your local album.

5.3 Monitorování parkování

Requires an intelligent hardwire kit. The Dash Cam automatically enters parking monitoring mode when the vehicle is off. If an emergency occurs, it takes a photo and generates a video.

1. Connect your phone to the Dash Cam via the app, then go to "Device Settings" > "Enter after the vehicle has stalled".
2. Vyberte režim monitorování parkování.

Parkovací režim: Časosběrné nahrávání videa

• Enters sleep mode after a set time or low voltage. Awakens by ignition.
• Collision during time-lapse triggers a photo and video, then switches to normal recording for 2 minutes before returning to time-lapse.
• Night vision (AI-ISP) is active in time-lapse for clearer night recording.

Parkovací režim: Normální nahrávání videa

Maintains normal recording after the car is off. Enters sleep mode after a set time or low voltage, awakened by ignition.

Parkovací režim: Spánek

Enters sleep state after car is off. Collision triggers wake-up and 30 seconds of normal recording, then returns to sleep. Repeated collisions extend normal recording. Low-voltage protection prevents battery drain.

• Poznámka: Parking monitoring requires the intelligent hardwire kit (optional).

5.4 Collision Detection & Locked Videos

When a collision (e.g., sudden braking) is detected, the Dash Cam generates an emergency photo and video, stored separately and not overwritten by loop recording.

5.4.1 Setting Camera Sensitivity

Adjust the Dash Cam's sensitivity to trigger photo/video capture. Higher sensitivity means easier triggering. Default is "Medium", with 7 levels including "Off" and "Custom".

1. Connect to the app, go to "Device" interface, tap "Device Settings" > "Adjust collision sensitivity".
2. Select "Driving" / "Parking" and set the appropriate sensitivity.

5.4.2 Set the Duration of Related Videos during Shooting

The default duration is 10s, with options for 10s, 20s, and 30s.

1. Connect to the app, go to "Device" interface, tap "Device Settings" > "Duration of related videos during shooting".
2. Set the desired duration:

• 10s: 5 seconds before and after the event.
• 20s: 10 seconds before and after the event.
• 30s: 15 seconds before and after the event.
• Vypnuto: Still generates an emergency video of 5 seconds before and after.

5.5 SR Mode

The Dash Cam's built-in SR (Sense Reality) function overlays driving data onto real-time footage, creating an enhanced visual experience.

5.5.1 View the Real-time SR Effects

1. Connect to the app, launch it, and tap the outlined area to enter the preview rozhraní.
2. Turn on the "SR" switch in the lower-left corner of the preview promítat do view real-time SR effects.

• Poznámka: Předview shows real-time SR effects, not the final version.
• Tap "Data" to view detailed driving data.

5.5.2 Generate and Share SR Videos

1. Launch the app, tap "Local Album", select a video, and turn on the "SR" switch to superimpose SR data.
2. Tap "Share" to crop the video, customize with SR effects and background music.
3. Tap "Confirm" to share to social media platforms.

• Poznámka: SR data is for reference only; accuracy depends on Dash Cam installation.

5.6 GPS Function (Optional)

The Dash Cam supports GPS function (if GPS version is selected), which is on by default. In outdoor open areas, it receives GPS signals, recording information like time, speed, altitude, direction, and driving track in the DDPAI App.

5.6.1 View Real-time Driving Trajectory and Current Location

Connect to the app, tap the outlined area to enter the preview interface. Tap "Track" to view driving trajectory and current location.

• Poznámka: GPS signal reception can be affected by densely populated areas, underground parking, tunnels, and cloudy weather.

5.6.2 View All Recorded Driving Trajectory

Launch the app, tap "Me" > "Driving Score" to view all driving track records.

• Poznámka: Log in to the DDPAI App to view records. Enable "Allow to save the driving data" in "Me" > "App Settings" > "Advanced Settings" to store data in the cloud for synchronization.

5.7 Pokročilý asistenční systém řidiče (ADAS)

ADAS (Advanced Driver Assistance System) supports detection of road conditions and provides driving reminders. This feature is only available on GPS-enabled versions.

5.7.1 Calibrate the Advanced Driver Assistance System (ADAS)

ADAS needs calibration for the first time use.

1. Connect to the app, go to "Device Settings" > "ADAS intelligent assistance reminder" > "Adjust ADAS Installation position".
2. Select "Go to live preview" > "Enter live preview" to enter the calibration interface.
3. After installation, tap "Calibration completed".

• Poznámka: Re-calibrate ADAS if the Dash Cam's installation position or lens angle changes.

5.7.2 Enable the ADAS Function

Connect to the app, go to "Device Settings", and turn on the "Advanced Driver Assistance System" switch.

• Enable "ADAS Intelligent Assistance Mode": Set sensitivity and turn on/off voice reminders for front vehicle start and fatigue driving.
• Disable "ADAS Intelligent Assistance Mode": No intelligent assistance voice reminders.

5.7.3 Set the Sensitivity of ADAS

You can adjust the ADAS intelligent driving assistance sensitivity.

• Vysoký: Wider alarm range, suitable for novice drivers.
• Střední: Střední rozsah alarmu.
• Nízký: Smaller alarm range, warns in high-risk scenarios, suitable for experienced drivers.

5.7.4 Fatigue Driving Voice Alert

Enable the "ADAS Driver Assistance" switch to turn fatigue driving alerts on or off. Voice prompts will remind users to rest during long drives.

5.8 4G Interconnection

With a 4G-cloud box (optional), the Dash Cam supports 4G functions like remote viewing, vehicle entry/exit notifications, cloud storage, and collision warnings.

• Poznámka: The 4G-cloud box needs to be purchased separately or as part of a package.

5.9 Přenos dat

Pro přístup k záznamu files:

• Remove the memory card, insert it into a card reader, and connect to a computer. Open the "DCIM" folder to browse or edit files.

• Videa z roku 200: Includes regular and time-lapse recordings. Time-lapse files from the front camera are prefixed with "S."
• 201 Photo: Includes voice-triggered and collision-triggered photos. Front camera snapshots are prefixed with "N," collision-triggered photos with "G."

• Poznámka: For dual-channel devices, "200video" and "201photo" directories are subdivided into "front" and "rear" folders.

6. Údržba

6.1 Aktualizace firmwaru

Open the DDPAI App, connect to the Dash Cam Wi-Fi, and go to "Me" > "About DDPAI" > "Check version". The app will check for updates. Follow on-screen instructions to upgrade.

• Poznámka: Do not cut off power during upgrade. If upgrade fails due to power outage, consult customer service, download the latest package, and copy it to the device's DCIM folder.

6.2 Bezpečnostní opatření

Read all precautions for correct and safe use:

• Do not debug or watch video on your phone while driving.
• Do not install the Dash Cam in a location that blocks the driving view.
• Use only the included power cord to prevent fire or short circuits.
• Use a branded Micro-SD card (up to 512GB). Format it via the app before use. Do not insert/remove while device is on. Format regularly.
• Do not open or repair the Dash Cam yourself. Contact customer service for issues.
• The Dash Cam can be used in other places and powered by an adapter.
• If using a power adapter, ensure it meets standard requirements.
• Pictures in this guide are for reference only; refer to the actual product.

7. Řešení problémů (Často kladené otázky)

1. How do I format a memory card?

• Method 1 (On Device): Press the Settings button on the home screen, select "Format".
• Method 2 (Via App): Connect to the app, go to "Camera Settings" > "Storage Management".
• Method 3 (Via Computer): Remove the card, insert into a card reader, connect to computer, right-click the card drive and select "Format".

2. What is the Wi-Fi password of the Dash Cam?

The default Wi-Fi password is "1234567890". You can change it in "Camera Settings" > "Set WIFI Password" via the app.

3. Can I change the Wi-Fi password of the Dash Cam?

Yes. In the app, go to "Device Settings" > "Device Wi-Fi Password", enter a new password, confirm, and save.

4. How do I reset the Dash Cam?

In case of abnormal state, press the function button for approximately 6 seconds to reset the device. It will automatically restart.

5. What if I forget the Wi-Fi password?

Press the function button for approximately 6 seconds to reset the device. Then connect again with the default password (1234567890).

6. What should I do if the time is incorrect?

Connect your device to your mobile phone via the DDPAI app. Ensure the app is connected to the camera's Wi-Fi. The camera will automatically synchronize the phone time.

7. What is AI-ISP?

AI-ISP technology uses data learning to identify and analyze image content, adjusting parameters for clearer details and accurate color reproduction. The Z50 Pro's AI-ISP enhances night parking monitoring, providing bright and colorful images similar to daytime.

8. How to use the SR mode?

In the video playback and download interface, use the SR switch to display the SR effect.

9. Why can't I see the SR effect?

1. First, check if the device is successfully positioned.
2. After successful positioning, connect the app for a few minutes and download the video. If no SR effect, contact customer service.

10. Cannot use the remote viewing function?

1. Ensure the device is operating normally and the 4G network is available. After the 4G-cloud box is connected, the Dash Cam broadcasts "4G network connected".
2. Ensure your mobile phone's wireless network or data network can access the Internet.

11. When using the remote viewing function, the screen prompts "Retry"?

This may be due to poor 4G signal. Move to a location with strong signal and try again.

8. Záruka a podpora

The DDPAI Dash Cam Z50 Pro comes with a 1-year warranty covering hardware quality issues and non-human damages that cannot be resolved by software updates.

365-Day Free Replacement Guarantee:

• Období krytí: Within 365 days of delivery (or system auto-confirmation of receipt).
• Rozsah záruky: Covers hardware quality issues and non-human damages that cannot be resolved by software updates only.
• Náklady: You pay return shipping; DDPAI covers delivery of the new replacement.
• What to Provide: Order number + proof of defect (e.g., video, SN code).

For any product failures or issues, please contact official customer service for relevant consultation and support.

9. Uživatelské tipy

• For optimal video quality and to avoid storage issues, always use a high-speed (U3 recommended) MicroSD card from a reputable brand.
• Regularly format your MicroSD card through the DDPAI app to maintain smooth operation and prevent errors.
• If you experience issues with Wi-Fi or 4G connectivity, try moving to an area with a stronger signal or resetting the Dash Cam.
• Ensure the Dash Cam's lens is clean and unobstructed for the best recording and ADAS performance.
• When using parking monitoring, consider the intelligent hardwire kit for continuous power and full functionality.