ASMAX Smart Air Pump T10 User Manual

Zavedení

Děkuji za nákupasing the ASMAX Smart Air Pump T10. This portable electric air compressor is designed for efficient and convenient inflation of various items, including car, motorcycle, and bicycle tires, as well as sports balls. It features a powerful 7500mAh battery, real-time pressure monitoring, automatic shut-off, and multiple inflation modes. Equipped with a high-performance motor and intelligent cooling system, it effectively prevents overheating during use and delivers a fast inflation rate of 26L/min, quickly inflating your tires with a maximum pressure of 160psi. Please read this user manual carefully before using the air pump and keep it for future reference.

Bezpečnostní opatření

• Do not leave the device unattended during inflation.
• Keep the device away from flammable and explosive materials.
• Avoid moisture and prevent it from falling.
• Do not store the product in places that are too cold, hot, or humid.
• The product contains a built-in lithium battery. Do not throw the product into fire or dispose of it randomly.
• Uchovávejte výrobek mimo dosah dětí.

Bezpečnostní opatření při vysokých teplotách

When the air pipe is unscrewed after prolonged use, both the air pipe and its connector may become hot. Avoid touching them with your hands for extended periods.

Obsah balení

Image: ASMAX Smart Air Pump T10 with included accessories.

• 1 x ASMAX Smart Air Pump T10
• 1 x nabíjecí kabel typu C
• 1 x Fast-connected Air Pipe with Schrader Valve
• 1 x Air Inflation Needle for Balls
• 1 x Uživatelská příručka
• 1 x Presta ventilový adaptér
• 1 x úložný sáček
• 1 x General Connector

Konec produktuview

Obrázek: Přední strana view of the ASMAX Smart Air Pump T10, highlighting the display and controls.

Displej a ovládací prvky

• Real-time Air Pressure: Displays current pressure.
• Displej jednotky: Shows selected pressure unit (PSI, BAR, KPA, Kg/cm²).
• Displej úrovně výkonu: Indicates battery charge.
• Preset Air Pressure: Shows the target pressure value.
• Výběr režimu: Allows choosing inflation modes.
• Preset + Button: Increases preset pressure.
• LED Lighting Button: Ovládá LED světlo.
• Vypínač: Zapíná/vypíná zařízení.
• Preset - Button: Decreases preset pressure.
• Mode Selection/Unit Button: Switches between modes and pressure units.

Porty a rozhraní

• Vstup typu C: Pro nabíjení zařízení.
• LED světlo: Poskytuje osvětlení.
• USB výstup: Functions as a power bank.
• USB Silicone Cover: Protects USB ports.
• Air Pipe Interface: Připojovací bod pro nafukovací hadici.

Specifikace

Image: Detailed specifications and included items for the ASMAX Smart Air Pump T10.

Nastavení

Charging the Air Pump

Image: The ASMAX T10 air pump being used to charge a smartphone, illustrating its power bank function.

The air pump has a Type-C charging input (5V - 2A). To charge, connect the air pump to a power adapter using the provided Type-C charging cable. The power indicator bar will flash while charging and turn solid green when fully charged. Note: The air pump cannot be used during charging.

Connecting the Air Pipe to the Valve

Image: Step-by-step guide for connecting the nozzle, selecting mode, and starting inflation.

The ASMAX Smart Air Pump T10 comes with various adapters for different valve types:

• Schraderův ventil: Commonly found on mountain bikes, electric bikes, motorcycles, and automobiles. Connect the fast-connected air pipe directly to the Schrader valve interface.
• Presta ventil: Required for road bikes and some mountain bikes.
  1. Connect the Presta valve adapter to the Schrader valve interface on the high-pressure air pipe.
  2. Unscrew the Presta valve cap from the tire.
  3. Připojte ventil Presta k adaptéru pro nafouknutí.
• Inflation Needle: Used for inflating sports balls (basketballs, footballs, etc.). Press the inflation needle and the Schrader valve interface tightly, then insert the needle into the ball's inflation hole.

Návod k obsluze

Zapnutí/vypnutí

• Zapnutí: Long press the Power button for three seconds.
• Vypnout: Long press the Power button for three seconds.

Mode Selection and Preset Pressure

Image: Visual representation of the five distinct inflation modes available on the device.

Short press the Mode Selection/Unit button to cycle through the five inflation modes:

• Automobile Mode: Výchozí 36 PSI (nastavitelný 2–64 PSI)
• Režim motocyklu: Výchozí 40 PSI (nastavitelný 2–54 PSI)
• Režim na kole: Výchozí 38 PSI (nastavitelný 2–150 PSI)
• Vlastní režim: Výchozí 100 PSI (nastavitelný 2–160 PSI)
• Režim míče: Výchozí 8 PSI (nastavitelný 2–15 PSI)

To adjust the preset pressure:

• Short press the '+' or '-' buttons: Adjusts by +/- 0.5 PSI (below 100 PSI) or +/- 1 PSI (above 100 PSI).
• Long press the '+' or '-' buttons: Quickly adjusts the preset pressure value.

The device automatically saves the selected mode and preset pressure for future use.

Spuštění a zastavení inflace

Image: Illustration of the automatic shut-off function when the preset pressure is reached.

• In the power-on state, short press the Start/Stop button to begin inflation.
• The pump will automatically stop once the preset air pressure value is reached.

Real-Time Pressure Monitoring and Unit Switching

Image: Close-up of the dual LED display, showing real-time pressure, preset pressure, battery level, and selected mode.

When the air pump is powered on and the air pipe is connected to an object, the upper part of the display screen will show the measured air pressure value. Long press the Mode Selection/Unit button to switch between PSI, BAR, KPA, and Kg/cm² units. (1 BAR = 14.5 PSI)

Režimy LED osvětlení

Image: The ASMAX T10 air pump's LED light illuminating a tire in the dark, demonstrating its emergency lighting feature.

• Short press the LED lighting button to turn on the steady LED light.
• Short press again for flashing light and SOS mode.
• Short press a third time to turn off the light.

Pressure Resetting

If the air pump is powered on, the air pipe is not connected to an inflation object, and the measured pressure value is not 0.0, simultaneously press the '+' and '-' buttons for two seconds. The display will return to normal after fully lighting up. This can improve air pressure accuracy, especially if there are differences in altitude or sensor readings. Calibration is not recommended at high temperatures.

Údržba

• Regularly check the air pipe and connectors for any signs of wear or damage. Ensure all connections are screwed tightly before use.
• Zařízení čistěte měkkým, suchým hadříkem. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Store the air pump in a cool, dry place, away from direct sunlight and extreme temperatures.
• Pokud zařízení nebudete delší dobu používat, pravidelně jej nabíjejte, aby se udržela baterie v dobrém stavu.

Odstraňování problémů

Tipy pro uživatele

• Přednastavený tlak: Always pre-set your desired pressure before starting inflation to utilize the automatic shut-off feature and prevent over-inflation.
• Pravidelně kontrolujte tlak v pneumatikách: For vehicles, regularly checking and maintaining correct tire pressure can enhance driving safety, extend tire lifespan, reduce fuel consumption, and improve the overall driving experience.
• Použití jako powerbanka: Don't forget the 7500mAh battery can also serve as a power bank for your smartphone, bike computer, or headlight in emergencies.
• Noční použití: The built-in LED light is very useful for inflating in low-light conditions or as an emergency warning light.
• Skladování: Keep all nozzles and the air hose together in the provided storage bag to avoid losing small parts.

Záruka a podpora

This ASMAX Smart Air Pump T10 comes with a 2-letá záruka. For any product inquiries, technical support, or warranty claims, please visit our official webnebo kontaktujte náš tým zákaznických služeb.

Oficiální Webmísto: www.asmaxworld.com

You can also find us on social media: ASMAX WORLD on Instagram, Twitter, LinkedIn, and YouTube.