Uživatelská příručka k solárnímu fotovoltaickému měniči Anern AN-PVI-6000W/10000W

1. Úvod

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Anern Solar PV Inverter (models AN-PVI-6000W and AN-PVI-10000W). This advanced pure sine wave inverter is designed for solar power systems, capable of working without a battery, and features multiple MPPT trackers for optimized energy harvesting. Please read this manual thoroughly before installation and use.

2. Bezpečnostní pokyny

• Instalaci musí provést kvalifikovaný personál v souladu s místními elektrotechnickými předpisy a předpisy.
• Ensure all power sources (solar panels, utility, generator) are disconnected before installation or maintenance.
• Nepokoušejte se měnič otevírat ani opravovat sami. Veškerý servis svěřte kvalifikovanému servisnímu personálu.
• Avoid exposing the inverter to rain, snow, or liquids.
• Zajistěte řádné větrání kolem měniče, aby nedošlo k přehřátí.
• Během instalace a údržby používejte vhodné osobní ochranné prostředky (OOP).
• The inverter can produce high voltaga proudy. Buďte mimořádně opatrní.

3. Konec produktuview

3.1 Klíčové vlastnosti

• Čistý sinusový výstup pro citlivou elektroniku.
• Konfigurovatelný vstup objtagřada pro domácí spotřebiče a osobní počítače prostřednictvím nastavení LCD.
• Grid-tie capability based on application via LCD settings.
• Kompatibilní se síťovým objtage.
• Automatický restart po obnovení napájení z AC.
• Built-in overload, over-temperature, and short-circuit protection.
• Funkce studeného startu.
• Dual MPPT (for 4KW and 6KW models) and Three MPPT (for 10KW and 15KW models) for optimal solar energy harvesting.
• Motor drive capability: 1.5P motor with 4KW, 3P motor with 6KW, 1.5P+3P motor with 10KW, 3P+3P motor with 15KW.
• Full load operation possible with solar power only (battery-less operation).
• Integrated WiFi for monitoring and control.

3.2 Product Components and Interfaces

The inverter features dual photovoltaic inputs (PV1, PV2) for connecting solar panels. A high-precision Current Transformer (CT) interface is included for real-time monitoring of grid current and 100% blocking of reverse feeding to the grid. AC input and output terminals are clearly marked for connection to utility/generator and loads, respectively. The front panel includes an LCD display and control buttons for configuration and monitoring.

4. Nastavení a instalace

4.1 Montáž

• Mount the inverter vertically on a sturdy, non-flammable surface.
• Ensure adequate clearance (at least 20 cm) around the inverter for proper airflow and heat dissipation.
• Install in a dry, well-ventilated area, away from direct sunlight, heat sources, and corrosive substances.
• The inverter has an IP21 degree of protection, meaning it is protected against solid objects over 12.5mm and vertically falling water drops. Avoid outdoor exposure without additional protection.

4.2 Schéma zapojení

Refer to Figure 3 for a typical system wiring diagram. Key connections include:

• Připojení solárního panelu: Connect your solar panels to the PV input terminals (PV1, PV2) on the inverter. Ensure correct polarity and voltage/current ratings are within the inverter's specifications.
• Vstup střídavého proudu (elektrická síť/generátor): Connect the AC input from your utility grid or a generator to the designated AC IN terminals.
• AC výstup (zátěže): Connect your home appliances, water pump, or other loads to the AC OUT terminals.
• CT Interface: Connect the Current Transformer (CT) for anti-backflow functionality and grid current monitoring.
• Komunikační port: Use the RS232/WiFi port for connecting to a Cube WiFi/GPRS module for remote monitoring via the PVguarder APP or Web rozhraní.

Ensure all connections are secure and properly insulated. Consult a qualified electrician for complex installations.

5. Návod k obsluze

5.1 Počáteční zapnutí

1. After all connections are verified, switch on the DC disconnect for the solar panels.
2. Switch on the AC input (utility/generator) breaker.
3. Finally, switch the inverter's ON/OFF button to the 'ON' position.
4. Měnič provede autotest a poté zahájí provoz.

5.2 LCD displej a nastavení

The LCD display provides real-time operational data and allows configuration of various parameters. Use the buttons adjacent to the display to navigate menus and adjust settings such as:

• Vstupní objemtage range for different load types (e.g., home appliances, personal computers).
• Grid-tie operation mode.
• Výstupní objemtage a frekvence.

5.3 Monitorování WiFi

The inverter supports WiFi monitoring. Connect a compatible WiFi module (e.g., Cube WiFi/GPRS) to the communication port. Follow the instructions provided with the WiFi module to connect it to your network and register the inverter with the PVguarder APP or Web platform for remote monitoring of performance, energy generation, and system status.

6. Údržba

• Pravidelná kontrola: Pravidelně kontrolujte veškeré kabelové spoje, zda nejsou těsné a zda nevykazují známky koroze.
• Čištění: Udržujte větrací otvory střídače čisté od prachu a nečistot. K čištění vnějšího povrchu používejte měkký, suchý hadřík. Nepoužívejte tekuté čisticí prostředky.
• Kontrola prostředí: Zajistěte, aby teplota a vlhkost vzduchu v instalačním prostředí zůstaly v rámci specifikovaného rozsahu.
• Sledování výkonu: Regularly check the inverter's performance via the LCD display or WiFi monitoring system to ensure optimal operation.

7. Řešení problémů

If the inverter is not operating as expected, perform the following basic checks:

• Bez napájení/Vypnutí displeje: Check all AC and DC power connections. Ensure the inverter's ON/OFF switch is in the 'ON' position. Verify utility power and solar panel output.
• Nízký výstupní výkon: Check solar panel connections and ensure they are clean and free from shading. Verify MPPT voltage range is being met.
• Chybové kódy na LCD displeji: Refer to the specific error code displayed on the LCD. While a comprehensive list is not provided here, common issues include over-voltage, pod-voltage, over-current, and over-temperature. Address the underlying cause (e.g., reduce load, improve ventilation).
• Inverter Not Connecting to Grid: Check grid parameters in LCD settings. Ensure CT interface is correctly installed and functioning.
• Spuštěna ochrana proti přetížení: Reduce the connected load. The inverter has overload protection to prevent damage.

If issues persist after basic troubleshooting, contact customer support.

8. Specifikace

9. Uživatelské tipy

• Battery-Less Operation: This inverter is designed to work without a battery, making your solar system more economical, safer, and reducing maintenance needs. Ensure your solar array is adequately sized for your load requirements, especially for motor-driven applications.
• Motorové aplikace: When connecting motors (e.g., water pumps), ensure the inverter model's capacity matches or exceeds the motor's power requirements. The 6000W model can drive a 3P motor, and higher power models can handle multiple motors.
• Vzdálený dohled: Utilize the WiFi monitoring feature with the PVguarder APP/Web to keep track of your system's performance and troubleshoot issues remotely.

10. Záruka a podpora

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster service. Do not attempt to repair the unit yourself, as this may void your warranty.