1. Konec produktuview
The TDA-08 series is a versatile rail-type weighing force transmitter and weight sensor signal amplifier designed for industrial applications. It integrates force measurement, weighing, display, and control functions into a single compact unit. This device is suitable for various weighing and force measurement systems, providing accurate signal amplification and processing.
Klíčové vlastnosti
- Integrates force measurement, weighing, display, and control functions.
- Internal integrated switching power supply, operating voltagRozsah: 10 V až 30 V.
- Equipped with an analog filtering function for stable readings.
- Automatic error diagnosis for easy identification and resolution of issues.
- Features automatic zero tracking.
- Supports automatic zeroing upon power-up.
- Configurable zero range and filter intensity.
2. Bezpečnostní informace
Please read and understand all safety instructions before installation, operation, or maintenance of the TDA-08 series device. Failure to follow these instructions may result in injury or damage to the equipment.
- Zajistěte napájení objtage is within the specified range (10V-30V DC).
- All wiring should be performed by qualified personnel and in accordance with local electrical codes.
- Před jakýmkoli připojením nebo údržbou odpojte napájení.
- Avoid exposing the device to excessive moisture, dust, or extreme temperatures.
- Do not open the device enclosure unless specifically instructed to do so by a qualified technician.
3. Instalace a nastavení
3.1 Vybalení
Carefully remove the TDA-08 unit from its packaging. Inspect the device for any signs of physical damage. Retain the packaging for future transport or storage.
3.2 Montáž
The TDA-08 series is designed for rail mounting. Securely attach the device to a standard DIN rail in a suitable enclosure, ensuring adequate ventilation and protection from environmental factors.
3.3 Zapojení
Refer to the terminal block labels on your specific TDA-08 model (TDA-08A, TDA-08B, or TDA-08C) for correct connections. Typical connections include:
- Příkon: Connect 10V-30V DC power to the designated power terminals (e.g., +V, -V, GND).
- Load Cell/Sensor Input: Connect the load cell or weight sensor to the input terminals (e.g., E+, E-, S+, S-). Ensure correct polarity.
- Analogový výstup: Connect to external control systems or displays via analog output terminals (e.g., OUT, AO).
- Digitální vstupy/výstupy: If applicable, connect control signals to digital input (e.g., IN) and output (e.g., OUT1, OUT2, OUT3) terminals.
Always consult the detailed wiring diagram specific to your TDA-08 model and application. If unsure, seek assistance from a qualified electrician or system integrator.
3.4 Počáteční zapnutí
After all connections are securely made, apply power to the device. The display should illuminate, and the device may perform an automatic zeroing sequence. Observe the display for any error messages or unexpected behavior.
4. Provoz
The TDA-08 series features a digital display and control buttons for easy operation. Specific button functions may vary slightly between models (TDA-08A, TDA-08B, TDA-08C).
4.1 Zobrazení nadview
The digital display shows the current measured value (e.g., weight, force). Indicators (e.g., NET, PWAK, Kg, g, N, KN) provide additional status information.
4.2 Basic Weighing/Measurement
Once powered on and calibrated, the device will continuously display the measured value from the connected sensor. Place the item to be weighed or apply force to the sensor.
4.3 Nulování
To set the current reading to zero (e.g., to tare a container), press the NULA button. The device supports automatic zero tracking and power-up zeroing.
4.4 Kalibrace
Calibration is crucial for accurate measurements. To enter calibration mode, typically press and hold the SET/CALI button. Follow the on-screen prompts to perform a multi-point calibration using known weights or force standards. Refer to the specific model's detailed instructions for the exact calibration procedure.
4.5 Nastavení parametrů
The device allows configuration of various parameters such as zero range, filter intensity, and output settings. Access the settings menu by pressing the SET/CALI button (or similar, depending on model). Use the navigation buttons (e.g., UP/DOWN arrows, SWITCH, OFTEN) to adjust values and confirm selections.
5. Údržba
The TDA-08 series is designed for reliable operation with minimal maintenance. Follow these guidelines to ensure longevity and performance:
- Čištění: Udržujte zařízení čisté a bez prachu a nečistot. K čištění používejte měkký, suchý hadřík. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Inspekce: Periodically inspect all wiring connections for tightness and signs of wear or corrosion.
- Prostředí: Zajistěte, aby provozní prostředí zůstalo v rámci specifikovaného rozsahu teploty a vlhkosti.
- Rekalibrace: Recalibrate the device periodically or if you suspect measurement inaccuracies.
6. Řešení problémů
The TDA-08 series includes automatic error diagnosis to help identify and resolve common issues. If you encounter a problem, refer to the table below:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný | Žádný výkon nebo nesprávný objemtage. | Zkontrolujte připojení napájení a hlasitosttage (10V-30V DC). |
| Nepřesné údaje | Needs calibration; sensor issue; environmental interference. | Perform calibration. Check sensor wiring and integrity. Ensure stable operating environment. |
| Displej zobrazuje „NAD“ nebo „PODNĚ“ | Sensor overload/underload; incorrect range setting. | Ensure load is within sensor capacity. Check and adjust range settings if configurable. |
| Žádná odezva tlačítek | Device frozen; button malfunction. | Power cycle the device. If problem persists, contact support. |
| Nestabilní údaje | Electrical noise; mechanical vibration; filter intensity too low. | Check for sources of electrical interference. Reduce vibrations. Increase filter intensity in settings. |
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Model | TDA-08 Series (TDA-08A, TDA-08B, TDA-08C) |
| Pevný typ | Magnetic Fastener (for mounting) |
| Použití | Window (likely refers to display window) |
| Provozní svtage | 10V ~ 30V DC |
| Filtering Function | Analogové filtrování |
| Diagnostika chyb | Automatický |
| Zero Tracking | Automatický |
| Power-up Zeroing | Automatický |
| Konfigurovatelné parametry | Zero range, filter intensity, etc. |
| Původ | pevninská Čína |
Rozměry a hmotnost
- Device Dimensions (L x H x D): 88mm x 53mm x 59mm (including rail mount)
- Rozměry balení (D x Š x V): 23 cm x 11 cm x 7 cm
- Hmotnost balení: 0.8 kg
8. Uživatelské tipy
Zatímco konkrétní tipy pro uživatele odviews or Q&A are not available, here are some general recommendations for optimal use:
- For critical applications, always verify calibration regularly.
- If experiencing signal noise, ensure proper grounding of the system and use shielded cables for sensor connections.
- Keep a record of your calibration dates and any parameter changes.
9. Záruka a podpora
For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model and serial number (if applicable) ready when contacting support.
