Uživatelská příručka k elektrickému holicímu strojku Hatteker HT-906

Zavedení

Thank you for choosing the Hatteker HT-906 Electric Shaver. This manual provides important information on how to safely and effectively use and maintain your new shaver. Please read it thoroughly before first use and keep it for future reference.

Hatteker HT-906 Electric Shaver and its packaging.

Bezpečnostní pokyny

• Ensure the shaver is fully charged before first use.
• Do not disassemble the shaver. For repairs, contact qualified service personnel.
• Uchovávejte mimo dosah dětí.
• This appliance is waterproof (IPX6 rated) and can be rinsed under running water. However, do not immerse it in water for extended periods.
• Používejte pouze dodaný nabíjecí kabel USB.
• Do not use if the shaver head or blades are damaged, as this may cause injury.

Vlastnosti produktu

• Inteligentní digitální displej: Shows battery level (10%-100%), remaining usage time, and low-power reminders.
• 4D plovoucí holicí hlava: Three ultra-sharp, hypoallergenic stainless steel blades adapt to facial contours for a close shave.
• Integrated Precision Trimmer: One-touch open trimmer for sideburns and longer beard hair.
• Holení na mokro i nasucho: IPX6 waterproof for use with foam, gel, or dry.
• USB dobíjecí: Convenient charging via power bank, computer, adapter, or socket.
• Dlouhá výdrž baterie: Up to 90 minutes working time on a 1.5-hour charge.
• Tichý motor: Operates at ≤65dB for a peaceful shaving experience.

The 4D floating shaving head adapts to your facial contours.

One-touch open precision trimmer for detailing.

Key features: Double Ring Cutting Net, ON/OFF button, LED Usage Time display, 100% Water Wash, Strong Power, and USB Charging.

Obsah balení

• Hatteker HT-906 Electric Shaver
• USB nabíjecí kabel
• Čisticí kartáč
• Uživatelská příručka

Included accessories: shaver, USB cable, and cleaning brush.

Nastavení

Počáteční nabíjení

1. Před prvním použitím se ujistěte, že je holicí strojek plně nabitý.
2. Connect the USB charging cable to the shaver's charging port and plug the other end into a USB power source (e.g., power bank, computer, USB adapter, wall socket).
3. Digitální LED displej bude zobrazovat průběh nabíjení. Plné nabití trvá přibližně 1.5 hodiny.
4. Once fully charged, the display will indicate 100% battery.

The shaver can be charged using various USB power sources.

Návod k obsluze

Zapnutí/vypnutí

• Press the ON/OFF button once to turn the shaver on. The LED display will illuminate, showing the remaining usage time.
• Press the ON/OFF button again to turn the shaver off.

Techniky holení

For best results, ensure your skin is clean before shaving.

• Suché holení: Hold the shaver at a right angle to your skin and move it in small, circular motions. Stretch your skin with your free hand to make the hairs stand upright.
• Mokré holení: Apply shaving foam or gel to your face. Hold the shaver at a right angle to your skin and move it in small, circular motions. Rinse the shaver head frequently during wet shaving to prevent clogging.

Use the shaver in circular motions for an effective shave.

The shaver supports both wet and dry shaving.

Používání přesného zastřihovače

• To activate the precision trimmer, push the trimmer release button (usually located on the back or side of the shaver).
• Use the trimmer to shape sideburns, mustaches, or to pre-trim longer beard hair before shaving with the main head.
• After use, push the trimmer back into its closed position.

Note: If your beard is long, use the sideburn trimmer first, then the main shaver for optimal results.

The precision trimmer is ideal for shaping and pre-trimming.

Údržba a čištění

Čištění holicí hlavy

1. Vypněte holicí strojek.
2. Press the release button to open the shaver head assembly.
3. Rinse the shaver head under warm running water to remove hair clippings and debris. For a more thorough clean, you can use the provided cleaning brush.
4. Shake off excess water and allow the shaver head to air dry before closing it.
5. Ensure the shaver head is securely closed before next use.

The shaver head can be rinsed directly under water for easy cleaning.

Obecná péče

• Pokud holicí strojek nepoužíváte, skladujte jej na suchém místě.
• Avoid dropping the shaver, as this may damage the blades or internal components.
• Periodically check the blades for wear and tear. Replace them if they become dull or damaged to maintain optimal shaving performance.

Odstraňování problémů

Specifikace

Detailed specifications for the Hatteker HT-906 shaver.

Approximate dimensions of the shaver.

Tipy pro uživatele

• For a smoother shave, consider using a pre-shave oil or washing your face with warm water to soften the beard before shaving.
• If you have sensitive skin, try wet shaving with a good quality shaving cream or gel to reduce irritation.
• Regularly clean the shaver head after each use to prevent hair buildup and maintain hygiene and performance.
• When traveling, activate the travel lock function (if available, usually by pressing and holding the power button for a few seconds) to prevent accidental activation.

Záruka a podpora

This Hatteker product is designed for durability and performance. For any issues or questions regarding your shaver, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase for warranty claims.

Produktové videoview