Zavedení
This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of your SOMMER Pearl 868MHz Rolling Code Garage Door Remote Control. Please read this manual carefully before use to ensure proper functionality and safety.
Image: The SOMMER Pearl remote control, showcasing its design and listing various compatible SOMMER Pearl and Slider+ models.
Nastavení
The remote control is designed for use with SOMMER garage door operators featuring SOMloq2 radio systems. Ensure you have access to your receiver/opener before proceeding with programming.
Programovací instrukce
- Activate Programming Mode on the Garage Door Operator: Open the housing of your garage door operator's radio receiver. Press the programming button (often labeled 'Radio button') on the control unit. The control unit may be located in the motor carriage or its own housing. A red LED will light up, indicating programming mode is active.
- Select Radio Channel on the Garage Door Operator: Repeatedly press the 'Radio button' to cycle through and select the desired radio channel on the garage door operator. If no transmission command is received within approximately 30 seconds, the radio receiver will exit programming mode.
- Program the Button on the Handheld Transmitter: Press the desired button on your new handheld transmitter. Continue pressing until the LED corresponding to the previously selected radio channel on the operator blinks and then turns off. This indicates successful programming.
To program additional handheld transmitters, repeat the steps above for each remote. Note that mixed operation of Somloq and SOMloq2 radio systems on a single button is not permitted.
Video: A demonstration of how to program the SOMMER Pearl remote control to a compatible receiver, showing button presses and LED indicators.
Image: Visual guide for programming the remote. Step 1: Activate programming mode on the garage door operator (red LED). Step 2: Select the radio channel on the garage door operator. Step 3: Press the remote button until the LED blinks and programming is complete. PS: Repeat for additional remotes.
Obsluha dálkového ovládání
The SOMMER Pearl remote control offers convenient, instant access to your automatic garage door opener.
Základní funkce
- Press the programmed button on the remote control to activate the garage door (open, stop, or close, depending on the channel programming).
- The remote is designed for ease of use and portability, fitting comfortably in your hand or pocket.
Image: Depicts the remote control's features: instant access at the touch of a button, light and portable design, pocket portability, and its function to open a garage door.
Údržba
Výměna baterie
The remote control comes with a CR2032 battery installed and ready for immediate use. When the battery needs replacement:
- Opatrně otevřete kryt dálkového ovladače casing, typically by unscrewing a small screw or prying gently along a seam.
- Locate the CR2032 coin cell battery on the circuit board.
- Remove the old battery and insert a new CR2032 battery, ensuring correct polarity.
- Zavřete casinbezpečně.
Image: Visual guide for battery replacement. Step 1: Unscrew the casing. Step 2: Locate and replace the CR2032 battery. Step 3: Reassemble the remote control.
Obecná péče
- Dálkový ovladač uchovávejte v suchu a mimo dosah extrémních teplot.
- Clean with a soft, dry cloth. Avoid harsh chemicals.
- The remote is made of durable ABS material with flexible silicone buttons for comfortable and effortless pressing. It features a keyhole for easy carrying.
Image: Highlights the quality and design of the remote: finely polished ABS material for comfort and durability, a keyhole for easy carrying, and flexible silicone buttons for light and effortless pressing.
Odstraňování problémů
- Dálkové ovládání nereaguje: Ensure the battery is correctly installed and has sufficient charge. Re-attempt the programming steps.
- Nekompatibilita: This remote is specifically designed for SOMMER SOMloq2 systems. It is not compatible with other brands or specific SOMMER models like V156, V456, V656, 4019V656, 4018V094, or 4018V656. Verify your garage door opener's system before purchase.
Image: A warning indicating specific SOMMER remote control models (4019V656, 4018V094, 4018V656, and others ending in V156, V456, V656) are not compatible with this product.
Specifikace
| Funkce | Specifikace |
|---|---|
| Model | RMTSOP01 |
| Frekvence | 868.8 MHz / 868.95 MHz |
| Metoda kódování | Rolling Code |
| Počet tlačítek | 4 |
| Typ baterie | CR2032 (v ceně) |
| Zabezpečení | 128bitové šifrování |
| Provozní rozsah | 100m (otevřené pole) |
| Rozměry (D x Š x V) | 15 cm x 13 cm x 3 cm |
| Hmotnost | 0.2 kg |
Image: A table summarizing the key specifications of the remote control, including frequency, number of buttons, battery type, and operating range.
Tipy pro uživatele
- Always ensure your garage door operator is compatible with the SOMMER SOMloq2 system before purchasing or attempting to program this remote.
- If you are experiencing issues, double-check the programming steps and ensure the battery is fresh.
- This remote operates at 868MHz. If your system requires a different frequency (e.g., 922MHz), this remote will not work.
Záruka a podpora
For any issues or questions not covered in this manual, please contact the seller or manufacturer's customer support. Keep your purchase receipt for warranty purposes.
