Uživatelská příručka k bezdrátovému ovladači SZ-933B

1. Konec produktuview

Elevate your gaming experience with the SZ-933B Wireless Controller, a versatile, high-performance controller designed for seamless compatibility across multiple devices. This controller delivers precision, customization, and convenience with features like a six-axis gyro sensor, 3D joystick calibration, and dynamic RGB lighting.

The SZ-933B Wireless Controller, available in white and black, features customizable RGB lighting.

2. Obsah balení

• 1 x SWITCH Wireless Controller SZ-933B
• 1 x nabíjecí kabel
• 1 x Uživatelská příručka

3. Specifikace

4. Nastavení a připojení

Pokyny pro párování:

• Bluetooth Switch Mode: Follow your Nintendo Switch's pairing instructions to connect the controller via Bluetooth.
• Bluetooth Standard Android Mode: Pair the controller via Bluetooth with your Android device. Note: In Android mode, vibration and axis functions are not supported.
• Bluetooth iOS Protocol Android Mode: Pair the controller via Bluetooth with your Android device using the iOS protocol.
• Bluetooth iOS Mode: Pair the controller via Bluetooth with your iOS device. Note: Your iOS device system must be 13.0 or above. Vibration and axis functions are not supported in this mode.
• Bluetooth PC (X-INPUT) Mode: Pair the controller via Bluetooth with your PC.
• Režim USB: Connect the controller directly to your PC via a USB port for wired play.

Inteligentní připojení:

• Stiskněte tlačítko DOMOV button to wake the controller. It will attempt to reconnect to the last paired Nintendo Switch.
• If reconnection fails after 15 seconds, the controller will automatically enter sleep mode.
• The controller retains the last-used mode settings (mode memory).

5. Návod k obsluze

Funkce Turbo:

• The controller supports adjustable turbo speeds: 5Hz, 10Hz, and 15Hz.
• To adjust the turbo speed, press and hold the TURBO button, then move the Right Stick Up/Down.
• The controller also features an auto-turbo mode.

Motor Vibration Control:

• Adjust the vibration intensity to one of four levels: 100%, 75%, 50%, or 0%.
• To adjust vibration intensity, press and hold the TURBO button, then move the Left Stick Up/Down.
• The controller has a memory function that retains your last vibration setting.

RGB světelné efekty:

The controller features dynamic RGB lighting with multiple modes and customizable brightness.

• Režimy osvětlení: Choose from Dazzling Light, Single Color, Breathing Light, and Breathing Cycle.
• Color Switching/Brightness Adjustment: Stiskněte tlačítko SVĚTLO button along with L3 (Left Stick click) or the Klávesy se šipkami to cycle through colors or adjust brightness.
• Přepínač zapnutí / vypnutí: Dlouze stiskněte SVĚTLO button for 5 seconds to turn the lighting on or off. The controller remembers your last lighting setting.

RGB lighting on the controller grips and around the joysticks.

6. Calibration & Testing

• 3D Joystick Calibration: Perform calibration through your console's interface.
• Six-Axis Sensor Calibration: Calibrate the motion sensors via your console or by using the hardware shortcut: press A + - + HOME zároveň.
• Button Test Mode: Utilize console-supported diagnostics to test individual button functionality.
• Resetovat: If you encounter issues, locate the physical reset button (often a small pinhole on the back) and press it with a thin object to reset the controller.

The controller features a reset button and a standard button layout for easy use.

7. Řízení spotřeby

• Automatický spánek: The controller will automatically enter sleep mode if it is idle for 5 minutes or if the connected Switch screen is turned off.
• Nízký objemtage Varování: When the battery level is critical, the LED indicators will blink rapidly to warn you.
• Critical Battery Auto-Sleep: The controller will automatically enter sleep mode if the battery level becomes too low to prevent damage.
• Nabíjení: Connect the controller using the provided charging cable. LED indicators will show charging status. A full charge takes approximately 2.5 hours.

8. Údržba

• Keep the controller clean by wiping it with a dry, soft cloth.
• Nevystavujte ovladač extrémním teplotám, vlhkosti nebo přímému slunečnímu záření.
• Do not disassemble the controller, as this may void the warranty and cause damage.
• Store the controller in a safe place when not in use to prevent accidental drops or impacts.

9. Řešení problémů

• Ovladač se nepřipojuje: Ensure the controller is charged and within range. Try resetting the controller using the physical reset button. Re-attempt the pairing process.
• Tlačítka nebo joysticky nereagují: Perform a button test via your console's settings. If issues persist, try calibrating the joysticks and sensors.
• Vibrace nefungují: Check the vibration intensity settings (TURBO + Left Stick Up/Down) to ensure it's not set to 0%. Note that vibration is not supported in Android and iOS modes.
• RGB světla nefungují: Ensure the lights are not turned off (long-press LIGHT for 5 seconds). Adjust brightness if necessary.
• Časté výpadky: Ensure there are no obstructions between the controller and the console/device. Avoid strong electromagnetic interference.

10. Uživatelské tipy

• For optimal performance, keep your controller's firmware updated. Check the manufacturer's webstránky pro nejnovější aktualizace.
• If experiencing input lag, try connecting the controller via USB if supported by your device, or ensure minimal wireless interference.
• While the controller is compatible with various platforms, specific features like vibration and axis functions may vary or be unsupported on certain operating systems (e.g., Android, iOS). Always refer to the manual for mode-specific limitations.

11. Záruka a podpora

This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official ipega webwebu. Uschovejte si účtenku jako doklad o koupi.