1. Konec produktuview
The ipega PG-SW2186 Charging Dock is an 8-slot charging station specifically designed for use with the Nintendo Switch 2 Official Dock. It is fully compatible with original Joy-Con controllers for Nintendo Switch, Nintendo Switch OLED, and Nintendo Switch 2 consoles.
This charging station allows for simultaneous charging of 1 to 4 Joy-Con controllers. It features a built-in smart chip for protection against over-charge, over-voltage, over-current, and over-protection functions, ensuring safe and reliable operation. Equipped with LED charging indicators, it provides real-time status display for each charging slot.
2. Pokyny k nastavení
-
Connect to Switch 2 Official Dock: Ensure your Nintendo Switch 2 Official Dock is powered on and connected to its official power adapter. The ipega PG-SW2186 charging dock is powered directly by the Switch 2 Dock.
Strana view showing the USB connector for the Switch 2 Official Dock. - Umístění: Place the charging dock on a stable, flat surface, away from strong magnetic fields.
3. Návod k obsluze
-
Nevýhody nabíjení: Gently slide your Joy-Con controllers into any of the 8 available charging slots (A, B, C, D). The design allows for easy plug-and-charge functionality.
Joy-Cons inserted into the charging dock, compatible with Switch OLED. -
LED indikátory: Each charging slot is equipped with an LED indicator. These indicators will illuminate to show the charging status of the inserted Joy-Cons. Refer to the 'Specifications' section for indicator behavior.
Detailní záběr view of the charging slots and LED indicators. -
USB 2.0 Expansion Port: The dock includes a USB 2.0 expansion port (5V DC output) for data transfer and charging of other compatible devices, such as the Nintendo Switch Pro Controller. This port is located at the rear of the unit.
Zadní view showing the USB 2.0 expansion port.
4. Údržba
- Čištění: Use a soft, dry cloth to clean the charging dock. Do not use liquid cleaners or abrasive materials.
- Prostředí: This device is intended for indoor use only. Avoid exposing the charging dock to extreme temperatures, humidity, or direct sunlight. Keep it away from strong magnetic fields.
- Skladování: When not in use for extended periods, disconnect the charging dock from the Switch 2 Official Dock and store it in a cool, dry place.
5. Řešení problémů
-
Joy-Cons not charging:
- Ensure the charging dock is properly connected to the Switch 2 Official Dock.
- Verify that the Switch 2 Official Dock is powered on and receiving power from its official adapter.
- Check if the Joy-Cons are correctly seated in the charging slots.
- Try charging a different Joy-Con to rule out an issue with the controller itself.
-
Nefunkční LED indikátory:
- Confirm the charging dock is receiving power.
- Ensure a Joy-Con is properly inserted into the slot.
-
USB 2.0 port not functioning:
- Ensure the charging dock is powered.
- Verify the connected device is compatible and properly connected.
6. Specifikace
| Funkce | Popis |
|---|---|
| Číslo modelu | PG-SW2186 |
| Kompatibilita | Nintendo Switch 2 Official Dock, Nintendo Switch Joy-Cons, Nintendo Switch OLED Joy-Cons, Nintendo Switch 2 Joy-Cons |
| Nabíjecí sloty | 8 (supports 1-4 Joy-Cons simultaneously) |
| Zdroj napájení | Powered by Switch 2 Official Dock (requires official power adapter) |
| USB rozšiřující port | 1 x USB 2.0 (5V DC output & data transfer for Switch Pro Controller only) |
| Doba nabíjení | Approximately 2.5 – 3.5 hours per cycle (for fully depleted Joy-Cons) |
| Ochranné funkce | Přebíjení, přepětítage, over-current, over-protection |
| LED indikátory | Equipped with charging indicators that easily identify the charging status. |
| Rozměry (cca) | Délka: 22 cm, Šířka: 11 cm, Výška: 4 cm |
| Hmotnost (přibližně) | 0.206 kg |
7. Záruka a podpora
Informace o záruce a technickou podporu naleznete v dokumentaci dodané s vaším nákupem nebo se obraťte přímo na výrobce. Uschovejte si doklad o koupi pro případné reklamace.
