Uživatelská příručka k třírežimové mechanické klávesnici MACHENIKE K600T

1. Úvod

The MACHENIKE K600T-B82W is an 82-key tri-mode mechanical keyboard designed for an optimized typing and gaming experience. Featuring a gasket-mounted design, versatile connectivity options (USB wired, 2.4G wireless, and Bluetooth), vibrant RGB backlighting, and hot-swappable switches, this keyboard offers both performance and customization.

2. Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• MACHENIKE K600T-B82W Mechanical Keyboard x 1
• 2-in-1 Keycap & Switch Puller x 1
• Návod k použití a záruční list x 1
• Náhradní spínače x 2
• Data Cable (USB-C to USB-A) x 1

3. Nastavení a připojení

The K600T-B82W supports three connection modes: USB Wired, 2.4G Wireless, and Bluetooth Wireless. Use the knob located on the top right of the keyboard to switch between modes.

3.1. Kabelové připojení USB

1. Turn the connection mode knob to the 'USB' position.
2. Connect the keyboard to your computer using the provided USB-C data cable.
3. The keyboard will be recognized automatically.

3.2. Bezdrátové připojení 2.4G

1. Turn the connection mode knob to the '2.4G' position.
2. Insert the 2.4G wireless dongle into an available USB port on your computer.
3. Stiskněte a podržte FN + ENTER keys simultaneously for 3 seconds to initiate pairing. The keyboard's indicator light will flash, indicating pairing mode.
4. Po připojení se kontrolka rozsvítí trvale.

3.3. Bezdrátové připojení Bluetooth

1. Turn the connection mode knob to the 'Bluetooth' position.
2. Stiskněte a podržte FN + ENTER keys simultaneously for 3 seconds to enter pairing mode. The keyboard's indicator light will flash.
3. On your host device (Desktop, Laptop, Tablet, etc.), turn on Bluetooth.
4. Hledat available devices and select either "K600T BT5.0" or "K600T BT3.0" to connect.
5. Po připojení se kontrolka rozsvítí trvale.

3.4. Počáteční nabíjení

The keyboard is equipped with a 4000mAh rechargeable battery. For optimal performance, it is recommended to fully charge the keyboard before its first wireless use. The keyboard supports simultaneous charging and usage.

4. Návod k obsluze

4.1. Ovládání RGB osvětlení

The K600T-B82W features full-on RGB lighting with 16 pre-set lighting effects and an audio visualizer mode.

• Použijte FN key in combination with other keys (refer to the keyboard's keycap legends or a dedicated software if available) to cycle through lighting effects, adjust brightness, speed, and color.
• Activate the Audio Visualizer effect for dynamic lighting that reacts to sound.

4.2. System Mode Switching

The keyboard supports both Windows and Mac system layouts.

• To switch to **Windows system mode**: Short press FN + 4. The indicator light will blink red 3 times.
• To switch to **Mac system mode**: Short press FN + 5. The indicator light will blink yellow 3 times.

4.3. Inteligentní správa napájení

To conserve battery life, the keyboard implements smart power management:

• In wireless mode, if idle for 3 minutes, the keyboard enters power-saving mode, turning off all indicators and backlight.
• After 30 minutes of inactivity, it enters deep sleep mode.
• To wake the keyboard from power-saving or deep sleep mode, simply press any key.

4.4. Přepínače vyměnitelné za provozu

The K600T-B82W features a hot-swappable PCB, allowing you to easily change pre-loaded switches for custom ones without soldering. This feature supports both 3-pin and 5-pin mechanical switches.

4.5. Anti-Ghosting & N-Key Rollover

The keyboard supports N-key rollover, ensuring that every keypress is registered accurately, even when multiple keys are pressed simultaneously. This is crucial for fast-paced typing and gaming.

5. Údržba

5.1. Generální úklid

• Klávesnice: K vyjmutí krytek kláves použijte dodaný stahovák na klávesy. Očistěte je měkkým hadříkem.ampened with mild soap and water, or a specialized keycap cleaning solution. Ensure keycaps are completely dry before reattaching.
• Podvozek: Wipe the keyboard chassis with a soft, dry, or slightly damp tkanina. Vyhněte se používání agresivních chemikálií nebo abrazivních materiálů.
• Mezi klíči: K odstranění prachu a nečistot z prostoru mezi klávesami použijte stlačený vzduch.

5.2. Výměna spínače

Výměna spínače:

1. Opatrně sejměte krytku kláves pomocí stahováku na krytky kláves.
2. Use the switch puller to gently grip the top and bottom clips of the switch.
3. Vytáhněte spínač přímo nahoru a vyjměte jej z desky plošných spojů.
4. Zarovnejte piny nového spínače s otvory na desce plošných spojů.
5. Gently push the new switch down until it clicks into place. Ensure it is seated firmly and straight.
6. Vyměňte krytku kláves.

Pozor: Apply gentle, even pressure when inserting switches to avoid bending the pins. If a switch does not go in easily, do not force it. Re-check pin alignment.

6. Řešení problémů

• Klávesnice nereaguje:
  • Check the connection mode knob; ensure it's set to the desired mode (USB, 2.4G, or Bluetooth).
  • For USB, ensure the cable is securely connected to both the keyboard and the computer.
  • For 2.4G, ensure the dongle is properly inserted and the keyboard is paired.
  • For Bluetooth, ensure Bluetooth is enabled on your device and the keyboard is paired and selected.
  • Zkontrolujte stav baterie; dobijte, pokud je nízká.
• Klíče se neregistrují:
  • If using hot-swappable switches, ensure the switch is fully seated in its socket. Try removing and re-inserting the switch.
  • Pokud je k dispozici, vyzkoušejte s jiným přepínačem.
• RGB osvětlení nefunguje:
  • Ensure the keyboard is not in power-saving mode. Press any key to wake it up.
  • Check RGB settings using FN kombinace kláves.
• Problémy s párováním Bluetooth:
  • Ensure the keyboard is in Bluetooth pairing mode (FN + ENTER po dobu 3 sekund).
  • Remove the keyboard from your device's Bluetooth list and attempt to pair again.
  • Ujistěte se, že je na vašem zařízení zapnuté a viditelné rozhraní Bluetooth.
• Baterie se nenabíjí:
  • Ensure the USB-C cable is properly connected to the keyboard and a working USB power source.
  • Zkuste jiný kabel nebo port USB.

7. Specifikace

Note: Product images are for illustration purposes only. Actual product appearance may vary. All data shown are theoretical values from internal testing under specific conditions. Actual performance may vary due to individual product differences, software versions, usage conditions, and environmental factors.

8. Uživatelské tipy

Based on common user feedback and product features, here are some tips for maximizing your experience with the MACHENIKE K600T-B82W keyboard:

• Explore Switch Options: The hot-swappable design allows you to experiment with different switch types. If you're new to mechanical keyboards, try various switches to find the actuation force and sound profile that best suits your typing or gaming style.
• Optimalizace připojení: Utilize the tri-mode connectivity to seamlessly switch between your desktop (2.4G or USB), laptop (Bluetooth), and tablet (Bluetooth) without needing multiple keyboards.
• Personalize RGB: Dive into the RGB lighting customization options. With 16 pre-set effects and an audio visualizer, you can create a unique aesthetic for your setup.
• Správa baterie: While the 4000mAh battery offers long life, remember to charge it regularly, especially if you frequently use wireless modes. The smart power management helps, but a quick charge before a long session is always a good idea.
• Udržujte to čisté: Regular cleaning of keycaps and the keyboard chassis will maintain its appearance and prevent dust buildup from affecting performance.

9. Záruka a podpora

For warranty information and technical support, please refer to the Warranty Card included in your package or contact MACHENIKE customer service through their official channels. Keep your proof of purchase for any warranty claims.