Zavedení
This manual provides instructions for the installation, use, and maintenance of your new Furniture Corner Protection Brackets. These L-shaped copper protectors are designed to safeguard furniture corners from damage while adding a decorative, retro aesthetic. Please read these instructions carefully before installation and retain for future reference.
Specifikace
| Funkce | Detail |
|---|---|
| Materiál | Měď |
| Rozměry (každý) | 6.70 cm x 6.70 cm x 2.00 cm (2.63 palce x 2.63 palce x 0.79 palce) |
| Množství v balení | 4 Corner Guards |
| Zahrnuté spojovací prvky | 16 hřebíků |
| Hmotnost (přibližně) | 0.17 kg |
| Doporučené použití | Woodworking, DIY furniture protection |
| Dokončit | Bronze (surface treated, anti-rust) |
Nastavení a instalace
These corner protection brackets are designed for easy installation on various furniture types such as tables, cabinets, drawers, and wooden boxes. Each pack includes 4 corner guards and 16 nails for fastening.
Kroky instalace:
- Připravte povrch: Ensure the furniture corner where the bracket will be installed is clean, dry, and free from dust or debris.
- Umístěte držák: Place the L-shaped corner guard firmly against the furniture corner, ensuring it sits flush on both surfaces.
- Označte pilotní otvory: Using a pencil or marker, carefully mark the positions for the nails through the pre-drilled holes on the bracket. There are typically four holes per bracket.
- Pre-drill (Recommended): For harder wood or to prevent splitting, it is recommended to pre-drill small pilot holes at the marked positions. Use a drill bit slightly smaller than the diameter of the provided nails.
- Zajistěte držák: Align the bracket with the pilot holes (if pre-drilled) and insert the provided nails. Gently tap the nails with a hammer until the bracket is securely fastened to the furniture. Ensure the bracket is tight and does not wobble.
- Opakovat: Install the remaining corner guards on other desired furniture corners following the same steps.
Funkce a použití
Once installed, the corner protection brackets serve a dual purpose:
- Ochrana nábytku: They effectively prevent furniture corners from friction, collision, and damage caused by everyday use, accidental bumps, or moving.
- Dekorativní vylepšení: With their retro and stylish appearance, these bronze-finished brackets add a unique decorative touch to your furniture, enhancing its overall aesthetic.
Péče a údržba
To ensure the longevity and appearance of your corner protection brackets, follow these simple maintenance guidelines:
- Čištění: Wipe the brackets regularly with a soft, dry cloth to remove dust and fingerprints. For more stubborn marks, a slightly damp Lze použít hadřík a ihned poté suchý hadřík.
- Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, solvents, or harsh chemical detergents, as these can damage the surface treatment and finish of the copper.
- Pravidelně kontrolujte: Occasionally check the brackets and fasteners to ensure they remain securely attached. Re-tighten or replace nails if they become loose.
- Odolnost proti korozi: The copper material is surface-treated for anti-rust properties, but prolonged exposure to moisture or corrosive environments should be avoided to maintain its finish.
Odstraňování problémů
This is a simple product, and issues are rare. However, if you encounter any problems, consider the following:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Bracket feels loose | Nails are not fully secured or have loosened over time. | Gently tap the nails further into the wood with a hammer until the bracket is firm. If nails are stripped, consider using slightly larger screws (not included) if appropriate for your furniture. |
| Bracket appears discolored or tarnished | Exposure to harsh chemicals, excessive moisture, or natural aging of copper. | Clean with a soft, dry cloth. Avoid harsh cleaners. If tarnishing is severe, specialized copper cleaner may be used sparingly, followed by thorough drying. |
| Bracket is damaged (bent, scratched) | Impact or physical stress. | The brackets are designed for protection, but severe impacts can cause damage. Replace the damaged bracket with a new one. |
Tipy pro uživatele
- For optimal stability and to prevent wood splitting, always pre-drill pilot holes, especially when installing on dense wood.
- When installing, ensure the bracket is perfectly aligned with the corner before fastening to achieve the best aesthetic and protective coverage.
- Consider the thickness of your furniture material. If the wood is very thin, shorter nails or small screws might be more appropriate (not included).
Záruka a podpora
No specific warranty information is provided for this product. For any questions regarding installation, maintenance, or product functionality, please refer to the seller or retailer from whom the product was purchased.
