1. Úvod
The SINOTIMER CN101S is a reliable 1-second interval digital LCD timer switch designed for automatic control of various electrical equipment. This programmable time relay allows you to set precise ON/OFF schedules over a 7-day weekly cycle, with a minimum interval of 1 second. It is ideal for applications such as controlling streetlights, neon signs, lamps, water heaters, air conditioners, billboards, electric cookers, boosters, sprayers, bottlers, preheaters, agriculture facilities, and broadcasting equipment.
Equipped with a built-in battery, the CN101S retains its programmed settings even during power failures, ensuring continuous operation. Its design features low power consumption, a high-accuracy CMOS chip, and strong anti-jamming capabilities, making it simple and easy to set up and use.
2. Klíčové vlastnosti
- Programovatelné ovládání: 24 hours / 7 days a week programming with 1-second interval.
- Vysoká kapacita: Rated for 3500 Watts / 16 Amps.
- Záloha paměti: 1.2V built-in battery saves programs during power outages.
- Přesnost: Auto time error correction of +/- 30 seconds weekly.
- Input/Output Voltage: 200-250VAC, 50/60Hz.
- Konfigurace výstupu: 1 Normally Open (NO) contact.
- Materiál: Durable ABS + electronic components.
- Kompaktní design: Easy to integrate into various setups.
3. Technické specifikace
| Parametr | Hodnota |
|---|---|
| Model | CN101S |
| Vstupní objemtage | 200-250VAC, 50/60Hz |
| Výstupní objemtage | 200-250VAC |
| Maximální zatěžovací proud | 16 Amps |
| Maximální zátěžový výkon | 3500 wattů |
| Programovatelnost | 24 hours / 7 days weekly |
| Minimální interval | 1 Druhý |
| Time Error Correction | +/- 30 seconds weekly (Auto) |
| Zálohování paměti | 1.2V Built-in Battery |
| Materiál | ABS + elektronické součástky |
| Rozměry (D x Š x V) | 7.0 cm x 7.0 cm x 4.0 cm |
4. Nastavení a zapojení
Důležité bezpečnostní upozornění: Installation should be performed by a qualified electrician or knowledgeable individual. Ensure power is disconnected before attempting any wiring.
4.1 Schéma zapojení
Refer to the diagram below for proper wiring connections. The timer features 5 terminals on the back for input power and load connection.
- Terminal 1 (LINE INPUT): Connect the Live (L) wire of your 200-250VAC, 50/60Hz power supply.
- Terminal 2 (NEUT INPUT): Connect the Neutral (N) wire of your 200-250VAC, 50/60Hz power supply.
- Terminal 3 (NEUT POWER OUTPUT): Connect the Neutral (N) wire of your electrical load to this terminal. This provides the neutral path for the load.
- Terminal 4 (LOAD POWER OUTPUT): Connect the Live (L) wire of your electrical load to this terminal. This is the switched Live output (Normally Open contact) that the timer will control.
- Terminal 5 (LOAD POWER OUTPUT): This terminal is also labeled "LOAD". Given the specification of "1NO" (one Normally Open contact), Terminal 4 is the primary switched output. Terminal 5 may be an alternative connection point for the switched load or for specific dual-load configurations not typically used with a single NO relay. For standard operation, use Terminal 4 for the switched live to your load.
Ujistěte se, že všechny spoje jsou bezpečné a izolované.
4.2 Initial Power-Up and Display Overview
Once wired, apply power. The LCD display will illuminate. If the display is blank or dim, allow the internal battery to charge for a few minutes. The built-in 1.2V battery ensures that your programmed settings are retained even if the main power is interrupted.
Přední panel obsahuje:
- LCD displej: Shows current time, day, ON/OFF status, and programming modes.
- Tlačítko MANUAL: For manual override of the timer's output.
- Tlačítko P (Program): Enters and navigates programming mode.
- D+ (Day) Button: Adjusts the day of the week or selects days in program mode.
- H+ (Hour) Button: Upraví hodinu.
- M+ (Minute) Button: Upraví minuty.
- Clock Icon Button: Used in conjunction with D+, H+, M+ to set the current time.
- Tlačítko R (Reset): Resets the timer to factory defaults (clears all programs and current time).
5. Návod k obsluze
5.1 Nastavení aktuálního času a dne
- Stiskněte a podržte Ikona hodin tlačítko.
- Zatímco držíte Ikona hodin tlačítko, stiskněte D+ pro nastavení aktuálního dne v týdnu.
- Zatímco držíte Ikona hodin tlačítko, stiskněte H+ pro nastavení aktuální hodiny.
- Zatímco držíte Ikona hodin tlačítko, stiskněte M+ pro nastavení aktuální minuty.
- Uvolněte Ikona hodin tlačítko. Aktuální čas a den jsou nyní nastaveny.
5.2 Programming ON/OFF Schedules
The CN101S allows for multiple ON/OFF programs. Follow these steps to set your desired schedules:
- Stiskněte tlačítko P (Program) button once to enter program setting mode. The display will show "1 ON".
- Stiskněte D+ to select the day(s) for this program. You can choose individual days, weekdays, weekends, or all 7 days.
- Stiskněte H+ pro nastavení požadované hodiny zapnutí.
- Stiskněte M+ pro nastavení požadované minuty zapnutí.
- Stiskněte P (Program) stiskněte znovu. Na displeji se zobrazí „1 VYP“.
- Stiskněte D+ to select the day(s) for this OFF program (usually the same as the ON program).
- Stiskněte H+ to set the desired OFF hour.
- Stiskněte M+ to set the desired OFF minute.
- To set additional programs, press P (Program) again to cycle through "2 ON", "2 OFF", and so on. Repeat steps 2-8 for each program.
- Jakmile jsou všechny programy nastaveny, stiskněte tlačítko Ikona hodin tlačítko pro ukončení programovacího režimu a návrat k zobrazení aktuálního času.
The timer supports 1-second intervals, meaning you can set very precise ON/OFF durations. If a program is not needed, simply skip setting its ON/OFF times, or ensure the ON and OFF times are identical to effectively disable it.
5.3 Ruční ovládání
The MANUÁL button allows you to temporarily override the programmed schedule. Pressing this button will cycle through different modes:
- NA: Výstup je trvale zapnutý a ignoruje programy.
- AUTO: The timer operates according to the programmed schedules.
- OFF: Výstup je trvale VYPNUTÝ a ignoruje programy.
Select "AUTO" for the timer to follow your programmed schedules.
5.4 Resetování časovače
To clear all programs and reset the current time to factory defaults, press the small R (Reset) button using a pointed object (like a pen tip). After resetting, you will need to set the current time and reprogram all schedules.
6. Údržba
- Čištění: Wipe the timer's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Baterie: The CN101S has a built-in 1.2V battery for memory backup. This battery is not user-replaceable. If the timer consistently loses settings after power outages, the battery may need servicing by a professional.
- Prostředí: Ensure the timer is installed in a dry environment, away from direct sunlight, extreme temperatures, and corrosive substances.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Displej je prázdný nebo tmavý. | No power supply or internal battery discharged. | Check power connections. Allow timer to charge for a few minutes after initial power-up. |
| Timer not switching ON/OFF as programmed. | Incorrect program settings, manual override active, or incorrect current time. |
|
| Programs are lost after a power outage. | Internal backup battery is depleted or faulty. | The battery is not user-replaceable. If this issue persists, consider professional servicing or replacement. |
| Tlačítka nereagují. | Dočasná softwarová závada nebo fyzické poškození. | Try pressing the R (Reset) button. If unresponsive, disconnect power for a few minutes and reconnect. If problem persists, contact support. |
8. Uživatelské tipy
- For critical applications, always double-check your programmed schedules after setting them.
- Consider using the manual override function for temporary changes without altering your main programs.
- When setting programs, ensure the ON time is before the OFF time within a 24-hour cycle, or that the OFF time is on the subsequent day if the cycle spans midnight.
9. Záruka a podpora
For technical assistance, warranty information, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
