Skydroid R10 / R10 Mini Receiver User Manual

1. Úvod

This manual provides detailed instructions for the Skydroid R10 and R10 Mini receivers, designed for use with Skydroid T12, T10, and SG12 radio transmitters. These receivers are essential components for establishing reliable communication between your remote control and your RC aircraft, enabling precise control and data transmission.

Please read this manual thoroughly before operating your receiver to ensure proper setup, safe operation, and optimal performance.

2. Specifikace

2.1 Skydroid R10 Receiver

2.2 Skydroid R10 Mini Receiver

2.3 Všeobecné specifikace

3. Obsah balení

Balíček obvykle obsahuje následující položky:

• Skydroid R10 or R10 Mini Receiver (1 piece)
• Antennas (2 pieces, pre-attached or included separately depending on model)
• Connection cables (e.g., SBUS, digital transmission line, camera cable, depending on model and application)

4. Pokyny k nastavení

Follow these steps to properly set up your Skydroid R10 Mini Receiver with your flight control system and camera. The R10 receiver follows a similar connection logic.

4.1 Wiring Diagram (R10 Mini Example)

Refer to Figure 6 for a visual guide on connecting the R10 Mini receiver. Key connections include:

• Receiver to Flight Control: Connect the receiver's SBUS line and digital transmission line to the appropriate ports on your flight controller (e.g., FMU 2.4.8 as shown). Ensure correct polarity and pin assignments.
• Camera to Receiver: Connect the camera cable from your FPV camera to the designated camera input on the receiver.
• Moc: Ensure the flight control system is powered correctly, which will in turn power the receiver.

4.2 Postup párování

1. Power On Flight Control: Ensure your flight control system is powered on. This will also power the connected receiver.
2. Initiate Pairing on Receiver: Press the counter button (pairing button) on the receiver. The green indicator light on the receiver should flash quickly, indicating it is in pairing mode.
3. Zapnutí dálkového ovládání: Turn on your Skydroid T12, T10, or SG12 radio transmitter.
4. Potvrdit spárování: Once pairing is successful, the green indicator light on the receiver will stop flashing and remain steadily on. A "drip" sound from the remote control may also confirm successful pairing.

5. Návod k obsluze

After successful setup and pairing, you can begin operating your RC aircraft.

1. Connect Remote Control to Data Line: Plug your remote control into its data line (e.g., USB cable) and connect it to your ground station device (e.g., smartphone or tablet running the Skydroid FPV app).
2. Verify Image and Data: Check the ground station display to ensure that the video feed from the camera is visible and that telemetry data is being received.
3. Předletové kontroly: Before flight, always perform comprehensive pre-flight checks, including verifying control surface movements, motor response, and battery levels.
4. Letový provoz: Operate your RC aircraft according to standard safety procedures and local regulations.

6. Údržba

To ensure the longevity and reliable performance of your Skydroid receiver, follow these maintenance guidelines:

• Udržujte v čistotě: Regularly inspect the receiver for dust, dirt, or debris. Use a soft, dry brush or compressed air to gently clean the unit. Avoid using liquids or solvents.
• Chránit před živly: Keep the receiver away from moisture, extreme temperatures, and direct sunlight. Ensure it is properly housed within your aircraft to protect it from physical damage.
• Kontrola připojení: Periodically check all wiring connections for secure fit and signs of wear or damage. Loose connections can lead to signal loss.
• Umístění antény: Ensure antennas are positioned correctly and are not obstructed by carbon fiber or other conductive materials, which can degrade signal quality.
• Aktualizace firmwaru: Podívejte se na oficiální Skydroid website or app for any available firmware updates for your receiver and transmitter. Keeping firmware up-to-date can improve performance and add new features.

7. Řešení problémů

If you encounter issues with your Skydroid receiver, refer to the following common troubleshooting steps:

• No Signal/No Pairing:
  • Ensure both receiver and transmitter are powered on.
  • Zkontrolujte, zda jsou všechna zapojení kabeláže bezpečná a správná.
  • Re-attempt the pairing procedure carefully.
  • Zkontrolujte rušení od jiných zařízení 2.4GHz.
  • Ensure the receiver's green light is flashing quickly during pairing attempt.
• Občasná ztráta signálu:
  • Check antenna placement; ensure they are not shielded or damaged.
  • Inspect for physical damage to the receiver or antennas.
  • Ensure the operating environment is free from excessive RF interference.
• Žádný video kanál:
  • Verify the camera cable connection between the camera and the receiver.
  • Ujistěte se, že je samotná kamera zapnutá a funkční.
  • Check the ground station app settings for video input.
• Žádná telemetrická data:
  • Confirm the digital transmission line connection between the receiver and flight controller.
  • Check flight controller settings for telemetry output.
  • Ensure the ground station app is correctly configured to receive telemetry.

If problems persist, consult the Skydroid official support resources or contact your retailer.

8. Uživatelské tipy

Based on general user experiences with RC receivers:

• Orientace antény: For optimal signal reception, try to position the receiver antennas at a 90-degree angle to each other, away from large metal objects or carbon fiber frames.
• Testování rozsahu: Always perform a range test before flying, especially in a new location, to ensure reliable control link.
• Zdroj napájení: Ensure your receiver receives a stable power supply within its specified voltage range to prevent unexpected shutdowns or glitches.

9. Záruka a podpora

Skydroid products are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms, duration, and claim procedures, please refer to the documentation provided with your purchase or visit the official Skydroid webmísto.

For technical support, troubleshooting assistance beyond this manual, or inquiries about spare parts, please contact your authorized Skydroid dealer or the Skydroid customer service directly.