DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4

DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 Gate Door Remote Control

Návod k použití

1. Úvod

This manual provides detailed instructions for the setup, operation, and maintenance of your DOORHAN TRANSMITTER - 2 PRO / TRANSMITTER4 wireless remote control. This device is designed for convenient and secure operation of DOORHAN gate and garage door openers, utilizing a 433MHz rolling code frequency for enhanced security.

The remote control is available in 2-button and 4-button configurations and is compatible with all DOORHAN models, including TRANSMITTER 2, TRANSMITTER 4, TRANSMITTER -2 PRO, TRANSMITTER -4 PRO, and Premium RC black 4.

DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

Image: DOORHAN Remote Controls (2-button and 4-button versions) with 433MHz frequency and included battery.

2. Obsah balení

Pečlivě zkontrolujte balení, abyste se ujistili, že jsou přítomny všechny položky:

  • 1x Remote Control (Battery included)
  • 1x English Manual (Quick Guide)
  • 1x Šňůrka
  • 1x Backup Battery
  • 1x Blister Box (packaging)
Package contents: Blister box, Instructions (Quick Guide), Remote control, Lanyard, Backup battery.

Image: Package contents including remote, quick guide, lanyard, and backup battery.

3. Specifikace

Funkce Specifikace
Počet kanálů 2 nebo 4
Frekvence 433 MHz / 433.92 MHz
Typ programování Programming with Receiver
Kód Rolling Code
Pracovní rozsah 30–150 metrů (v závislosti na prostředí)
Kompatibilita All DOORHAN models
Osvědčení CE
Rozměry (cca) 54 mm x 33 mm x 10 mm
Diagram showing dimensions and specifications of the DOORHAN remote control.

Image: Dimensions and key specifications of the remote control.

4. Setup (Programming)

To program your new DOORHAN remote control, you will need to pair it with your gate or garage door opener's receiver. The programming procedure is similar to that of original DOORHAN Transmitter 4 remotes. Always refer to your receiver's user manual for specific instructions, as procedures may vary slightly between models. For a typical DOORHAN Garage Control Panel, follow these steps:

  1. Press and release the button 'R' on the receiver.
  2. The left side of the display panel on the receiver will show '0' and then disappear immediately.
  3. Press any button on your new remote control twice. Coding is now completed.
  4. Press the transmitter button again to test operation. The gate or garage door should respond.

Poznámka:

  • To remove a single transmitter's code or all transmitter codes from the receiver memory, please refer to your receiver manual.
  • Ensure you are within range of the receiver during the programming process.
Image displaying both 2-button and 4-button DOORHAN remote controls, highlighting compatibility with TRANSMITTER-2 PRO and TRANSMITTER4 models.

Image: DOORHAN remote controls, compatible with various models.

5. Návod k obsluze

Once programmed, operating your DOORHAN remote control is straightforward:

  • Aktivace: Press the desired button on the remote control to activate your gate or garage door opener.
  • Rozsah: The remote operates within a range of 30-150 meters, depending on environmental conditions and obstacles.
  • Více zařízení: If you have a 4-button remote and multiple DOORHAN devices (e.g., two garage doors, a gate, and an alarm), you can program each button to control a different device.
Detailní záběr view of the 4-button DOORHAN remote control.

Image: Close-up of the 4-button remote control.

6. Údržba

Výměna baterie

The remote control uses a standard coin cell battery (typically CR2032). When the remote's range decreases significantly or it stops responding, it's likely time to replace the battery.

  1. Opatrně otevřete kryt dálkového ovladače casing. This may require a small screwdriver or prying tool.
  2. Remove the old battery, noting its orientation (positive (+) side up).
  3. Vložte novou baterii CR2032 kladným pólem (+) nahoru.
  4. Zavřete dálkový ovladač casinbezpečně.

Obecná péče

  • Dálkový ovladač uchovávejte v suchu a mimo dosah extrémních teplot.
  • Zabraňte pádu dálkového ovladače nebo jeho vystavování silným nárazům.
  • Clean the remote with a soft, dry cloth if necessary. Do not use harsh chemicals.

7. Řešení problémů

  • Dálkový ovladač nefunguje po naprogramování:
    • Ensure the remote's battery is fresh and correctly installed.
    • Repeat the programming steps carefully, ensuring the receiver acknowledges the remote.
    • Check your receiver's manual for any specific programming nuances or error codes.
  • Snížený provozní dosah:
    • Vyměňte baterii dálkového ovládání.
    • Check for any new sources of radio interference near your gate/garage door opener.
    • Ensure there are no new large metallic objects obstructing the signal path.
  • Dálkové ovládání funguje přerušovaně:
    • This often indicates a low battery. Replace it.
    • Check for loose connections inside the remote if you have opened it previously.

8. Uživatelské tipy

Od zákazníka nebyly k dispozici žádné konkrétní tipy pro uživatele.views or Q&A for this product. However, general tips for remote controls include:

  • Keep a spare battery on hand for quick replacement.
  • Store the remote in a consistent, easily accessible location (e.g., car visor clip, key chain) to avoid misplacing it.
  • If you have multiple remotes, label them to easily identify which controls which device.

9. Záruka a podpora

For any issues or support inquiries regarding your DOORHAN remote control, please contact the seller or manufacturer directly. Keep your purchase records handy as they may be required for warranty claims or technical assistance.

This product is manufactured by Shenzhen Sarik Technology Co.,Ltd.

© 2024 DOORHAN. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.