Zavedení
The Zoom PodTrak P4 is a portable, battery-powered podcast recorder designed for creators on the go. It features four microphone inputs, four independent headphone outputs, and a USB phone input, making it ideal for recording interviews, multi-person podcasts, and field recordings. Its compact design and intuitive controls ensure high-quality audio capture in various environments.
Průvodce nastavením
Napájení zařízení
The PodTrak P4 can be powered by batteries or via USB. For portable use, insert four AA batteries into the battery compartment. For studio use or extended sessions, connect a USB power adapter (not included) to the DC 5V port.
Vložení paměťové karty
The PodTrak P4 records directly to an SD card. Open the SD card slot cover on the side of the device and insert a compatible SD, SDHC, or SDXC card (up to 512GB) until it clicks into place. Ensure the card is formatted correctly (FAT32/exFAT) for optimal performance.
Insert an SD card for recording storage. Připojení mikrofonů
Connect up to four microphones to the XLR inputs located at the top of the device. Each input has an independent gain control knob. The P4 supports both dynamic and condenser microphones, with phantom power available for condenser mics (check device settings for activation).
Four XLR inputs for connecting microphones. Připojení sluchátek
Plug up to four pairs of headphones into the 3.5mm headphone output jacks located at the bottom of the device. Each output has its own volume control knob for independent monitoring.
Connect headphones for monitoring audio. Connecting a Phone via USB
Use a USB cable to connect your smartphone to the PodTrak P4's USB port. This allows you to record phone calls directly into your podcast, with mix-minus functionality to prevent echo.
Návod k obsluze
Zapnutí/vypnutí
Press and hold the power button (usually located on the side or back) to turn the device on or off. The display will illuminate upon startup.
Úprava vstupních úrovní
For each microphone input (1-4), rotate the corresponding gain knob to adjust the input level. Monitor the levels on the display to avoid clipping (distortion). Press the microphone icon button below each knob to mute/unmute the input.
Záznam
Press the red 'REC' button to start recording. The display will show the recording time. Press 'REC' again to stop. The P4 records individual tracks for each input, allowing for flexible post-production.
Using Sound Pads
The PodTrak P4 features four sound pads (A, B, C, D) for triggering sound effects, music, or pre-recorded intros/outros. Press the corresponding button to play the assigned sound. Sounds can be loaded and managed via the menu.
Sledování zvuku
Adjust the individual headphone volume knobs for each connected headphone set to achieve comfortable monitoring levels. The main output level can also be adjusted.
Navigace v nabídce
Use the 'MENU' button to access settings and options. Navigate through menus using the arrow buttons and confirm selections with the 'ENTER' button.
Údržba
- Čištění: Zařízení otřete měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
- Skladování: Store the PodTrak P4 in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries if storing for extended periods to prevent leakage.
- Aktualizace firmwaru: Pravidelně kontrolujte informace od výrobce webweb s aktualizacemi firmwaru pro zajištění optimálního výkonu a přístupu k novým funkcím.
Odstraňování problémů
- Bez napájení: Ensure batteries are correctly inserted and charged, or that the USB power adapter is properly connected and functional.
- Žádný zvukový vstup: Check microphone connections, ensure microphones are powered (activate phantom power if needed for condenser mics), and verify input gain knobs are not set to minimum. Check if the input is muted.
- No Headphone Audio: Ensure headphones are properly plugged in and individual headphone volume knobs are turned up.
- Problémy s nahráváním: Check if the SD card has sufficient free space and is correctly formatted. Ensure the 'REC' button is pressed to initiate recording.
- Zkreslený zvuk: Reduce input gain levels to prevent clipping. Check microphone placement and ensure it's not overloaded.
Specifikace
| Funkce | Specifikace |
|---|---|
| Název značky | ZOOM |
| Číslo modelu | P4 |
| Styl | Handheld Microphone (Recorder) |
| Sdělení | Wireless (refers to general use case, device itself is wired for inputs/outputs) |
| Funkce | Zrušení šumu |
| Typ | Dynamic Microphone (compatible) |
| Použití | Záznam |
| Materiál | Kov |
| Polární vzor | Cardioid (compatible) |
| Poměr signálu k šumu | ≥80 dB |
| Frekvenční odezva | 20Hz-20KHz |
| Maximální SPL | 120 dB |
| Citlivost | -38 dB ± 2db |
| Typ konektoru | XLR |
| Původ | Pevninská Čína, Kuang-tung |
| Rozměry balení (D x Š x V) | 11 cm x 10 cm x 5 cm |
| Hmotnost balení | 0.11 kg |
Tipy pro uživatele
- For best audio quality, use high-quality XLR cables for microphone connections.
- Always test your audio levels before starting a recording session to prevent clipping or low volume.
- Consider using a wind screen or pop filter on microphones to reduce plosives and wind noise.
- Regularly back up your recorded audio files from the SD card to a computer or external storage.
Záruka a podpora
Informace o záruce a technickou podporu naleznete na oficiálních stránkách Zoomu. webnebo se obraťte na místního distributora. Uschovejte si doklad o koupi pro případ reklamace.
