Návod k obsluze dvoupásmového WiFi zesilovače EDUP AB022

1. Úvod

The EDUP AB022 is a high-power dual-band WiFi booster designed to extend the range and improve the signal quality of your existing wireless LAN devices. It operates on both 2.4GHz and 5.8GHz frequencies, providing up to 4W (36dBm) of output power to significantly enhance your WiFi coverage. This device is ideal for outdoor applications and works with certified IEEE 802.11a/n Wireless LAN devices.

Figure 1: EDUP AB022 Dual Band WiFi Booster with included antennas.

2. Co je v krabici

Pečlivě zkontrolujte obsah balení. Pokud některé položky chybí nebo jsou poškozené, obraťte se na prodejce.

• 1 x EDUP AB022 Dual Band WiFi Booster Unit
• 2 x antény
• 2 x Short RF Cables (SMA-K to RP-SMA-K, for connecting booster to router/AP)
• 2 x Longer RF Cables (SMA-K to RP-SMA-K, for connecting booster to external antennas, if applicable)
• 1 x Napájecí kabel USB

Figure 2: Package contents of the EDUP AB022.

3. Pokyny k nastavení

The EDUP AB022 is designed for simple plug-and-play operation, requiring no software installation. Follow these steps to set up your WiFi booster:

1. Napájení: The booster does not come with a power supply. You will need to provide one of the following:
   • A 12V/1A power adapter.
   • A 5V portable charger (power bank).
   • A compatible battery.
   Connect the chosen power supply to the booster unit using the provided USB power cable or a compatible DC power cable (2.5*0.7mm DC socket).
2. Connect to Router/Access Point (AP):
   • Identify the antenna ports on your WiFi router or access point.
   • Connect the short RF cables from the "TO AP1" ports on the booster unit to the corresponding antenna ports on your router/AP. Ensure a secure connection.
3. Připojte antény:
   • Attach the provided antennas directly to the "TO ANT1" ports on the booster unit.
   • Alternatively, if using external antennas, connect the longer RF cables from the "TO ANT1" ports on the booster unit to your external antennas.
4. Zapnout: Once all connections are secure, power on the booster unit.

Important Note on Power Input:

Ensure the input trigger power from your router/AP to the booster is within the specified range: Minimum 3dBm, Maximum 20dBm. Using excessive power may damage the equipment or cause it to malfunction.

Figure 3: Wiring Diagram for EDUP AB022 Booster.

The diagram illustrates the connection for both 2.4GHz and 5.8GHz channels. Each channel has a "TO AP" port for connecting to your Access Point/Router and a "TO ANT" port for connecting to the antenna.

4. Provoz

Once properly installed and powered on, the EDUP AB022 will automatically begin boosting your WiFi signal. It works by amplifying both the transmit and receive signals of your wireless devices, extending their range and improving connection stability.

LED indikátory:

• Vysílač (TX): A green LED indicates that the booster is actively transmitting a signal.
• Přijímač (RX): A red LED indicates that the booster is actively receiving a signal.

These indicators help confirm that the booster is functioning correctly in both directions.

5. Specifikace

Obecné specifikace produktu:

5.8GHz Channel Parameters:

2.4GHz Channel Parameters:

6. Údržba

• Čištění: Use a soft, dry cloth to clean the booster unit. Do not use liquid cleaners or aerosol sprays.
• Prostředí: Ensure the booster is operated within the specified temperature and humidity ranges to prevent damage.
• SpojeníPravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a nepoškozená.

7. Řešení problémů

• Žádné napájení/LED diody nesvítí:
  • Verify that the power supply is correctly connected and providing the specified voltage (5-16V).
  • Ujistěte se, že je napájecí zdroj funkční.
• Poor Signal Improvement:
  • Check all RF cable connections between the booster, router/AP, and antennas. Loose connections can degrade performance.
  • Ensure the input trigger power from your router/AP is within the 3dBm to 20dBm range. Input power outside this range can cause malfunction or damage.
  • Confirm that your router/AP is transmitting a strong enough signal for the booster to amplify effectively.
  • Adjust antenna positioning for optimal signal reception and transmission.
• Booster Malfunction/Damage:
  • If the booster exhibits unusual behavior or stops working, immediately check the input power. Excessive input power (above 20dBm) can burn out the equipment.
  • If damage is suspected, discontinue use and contact support.

8. Uživatelské tipy

• Optimální umístění: For best results, place the booster in a central location between your router/AP and the area where you need improved WiFi coverage. Avoid obstructions like thick walls or metal objects.
• Orientace antény: Experiment with the orientation of the antennas to find the best signal strength.
• Flexibilita napájecího zdroje: Utilize a power bank for temporary outdoor setups or in locations without easy access to a wall outlet, leveraging the 5V operating voltage kompatibilita.

9. Záruka a podpora

The EDUP AB022 WiFi Booster comes with a 1-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical support or warranty inquiries, please contact your retailer or the EDUP Official Store directly.