Scimagic-RC SMG-8112

Návod k použití

Scimagic-RC Tuya WiFi Smart Garage Door Remote Control Receiver

Model: SMG-8112

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Scimagic-RC Tuya WiFi Smart Garage Door Remote Control Receiver (Model SMG-8112). This device allows for smart control of garage doors, gates, and other automation systems via WiFi, 433MHz remote controls, and voice commands.

Scimagic-RC Tuya WiFi Smart Garage Door Receiver with WiFi logo and smart home integration icons, showing a garage and gate.

Figure 1: Scimagic-RC Tuya WiFi Smart Garage Door Receiver overview.

Klíčové vlastnosti:

2. Specifikace

AtributHodnota
Číslo modeluTuya WiFi SCS SENTINEL Remote Control Receiver (SMG-8112)
Název značkyScimagic-RC
Vstupní objemtageDC/AC 7-32V or AC 85-250V
Max. Proud2200W/10A
Rádiová frekvence433 MHz / 433.92 MHz
Metoda kódováníFixed code, Rolling code, Learning code
Kanál2
Rozsah recepce70-100 m
Pracovní teplota-20 ℃ až +70 ℃
Number of Stored Codes55 (for RF433 remotes) / 400 (total)
Kontrolní metodyAplikace, dálkové ovládání 433 MHz, hlasové ovládání
APP pro mobilní telefonTuya Smartlife
OsvědčeníCE, RoHS
Rozměry (cca)55 mm (Š) x 80 mm (D) x 28 mm (V)
Dimensions of the SMG-8112 receiver: 55mm width, 80mm length, 28mm height.

Figure 2: SMG-8112 Receiver Dimensions.

Varianty produktu:

ModelVstupní objemtageFunkce Wi-Fi
SMG-8112AC/DC 7-32V or AC 85-250VYes (Tuya Smartlife)
SMG-82212V-24V DCŽádný
Comparison table showing SMG-8112 with WiFi and dual voltage options, and SMG-822 without WiFi and 12-24V DC.

Figure 3: Comparison of SMG-8112 and SMG-822 models.

3. Nastavení

3.1 Kontrolní seznam před instalací:

3.2 Schéma zapojení:

The receiver is designed for easy integration with your existing gate or garage door opener. You will need to connect 4 wires between the receiver and your control panel. Refer to the diagram below for typical wiring connections.

Wiring diagram showing connection from WiFi receiver to two motors (Motor A and Motor B) for garage and gate control, with a WiFi router and remote controls.

Figure 4: Typical Wiring for Garage Door and Gate Control.

Poznámka: For specific wiring instructions for your gate or garage door opener, consult its respective manual. If you require technical support, please contact customer service.

3.3 App Installation and Pairing:

  1. Download the "Tuya Smart" or "Smart Life" app from your device's app store.
  2. Zaregistrujte se nebo se přihlaste ke svému účtu.
  3. Zapněte přijímač SMG-8112.
  4. Open the app and follow the on-screen instructions to add a new device. The app should automatically discover the receiver if Bluetooth is enabled and the device is in pairing mode (red light flashes rapidly). If not, manually add the device.
  5. Po zobrazení výzvy zadejte heslo k síti Wi-Fi 2.4 GHz.
  6. Po připojení se zařízení zobrazí ve vaší aplikaci.

Video 1: Demonstrates programming a rolling code remote and using the Tuya App for remote control.

4. Návod k obsluze

4.1 App Remote Control:

Once the receiver is paired with the Tuya Smart or Smart Life app, you can control your connected devices from anywhere with an internet connection.

A person using a smartphone to remotely control a garage door, illustrating the app remote control feature.

Figure 5: App Remote Control in action.

4.2 Voice Control:

Integrate your SMG-8112 with Amazon Alexa or Google Home for hands-free control.

  1. Ensure your SMG-8112 is successfully paired with the Tuya Smart or Smart Life app.
  2. Otevřete aplikaci Alexa nebo Google Home.
  3. Link your Tuya Smart/Smart Life account within the Alexa/Google Home app.
  4. Discover devices. Your SMG-8112 should now be controllable via voice commands (e.g., "Alexa, open the garage door").

4.3 433MHz Remote Control Programming:

The receiver can learn codes from 433.92MHz fixed and rolling code remote controls.

  1. Učení kódů vysílače:
    • Press and hold the "learn 1" or "learn 2" button on the receiver for 2 seconds. The "learn_led" light will illuminate.
    • Dokud svítí kontrolka „learn_LED“, stiskněte požadované tlačítko na dálkovém ovladači 433 MHz.
    • Continue holding the remote button until the "learn_led" flashes and then turns off. The remote's code has now been stored.
    • Repeat these steps for any other remote controls you wish to program.
  2. Erasing Transmitter's Codes:
    • Press and hold the "learn 1" or "learn 2" button on the receiver.
    • Keep holding until the "learn_led" light turns on and then goes out. All previously stored remote control codes for that channel will be erased.
Close-up of the SMG-8112 receiver board showing 'learn 1' and 'learn 2' buttons and the 'learn_led'.

Figure 6: SMG-8112 Receiver Board with Learning Buttons.

Poznámka: The receiver supports 433MHz learning code remotes. Rolling code and clone remotes may not be supported unless specifically mentioned.

4.4 pracovních režimů:

The SMG-8112 supports three working modes: Self-locking, Interlocking, and Inching. These modes define how the relay behaves when triggered.

You can set the Inching mode duration within the Timing options of the Tuya Smart/Smart Life app.

Screenshot of the Tuya app showing the 'Inching Setting' with a timer to automatically close a door after 120 seconds.

Figure 7: Inching Mode Setting in Tuya App.

4.5 Intelligent Timing Function:

Set schedules or countdown timers for automatic operation of your connected devices.

Screenshot of the Tuya app showing an 'Intelligent Timing Function' with a schedule to turn off lights at 22:00 and turn on at 07:00.

Figure 8: Intelligent Timing Function in Tuya App.

4.6 Share Control:

Allow family members or friends to control your devices by sharing access through the app.

A family sitting on a couch, all using their phones, with an overlay showing 'Share Device' option in a mobile app, indicating shared control.

Figure 9: Device Sharing Feature.

5. Údržba

6. Řešení problémů

ProblémMožná příčina / řešení
Device not connecting to WiFi / App
  • Ujistěte se, že vaše WiFi je 2.4 GHz. Sítě 5 GHz nejsou podporovány.
  • Check WiFi password for correctness.
  • Ensure Bluetooth is enabled on your phone during pairing.
  • Reset the device to pairing mode (red light flashes rapidly) and try again.
  • Check if your router has MAC filtering enabled; if so, disable it or add the device's MAC address.
  • Ensure strong WiFi signal at the device's location.
Dálkové ovládání nefunguje
  • Ensure the remote control is 433.92MHz and compatible (fixed or learning code). Rolling code and clone remotes may not be supported.
  • Check if the remote control's battery is dead and replace if necessary.
  • Re-program the remote control to the receiver following the instructions in section 4.3.
  • Ensure you are within the reception range (70-100m).
Hlasové ovládání nereaguje
  • Verify that your Tuya Smart/Smart Life account is correctly linked to Alexa/Google Home.
  • Ensure the device is online and accessible via the app.
  • Zkontrolujte přesnost hlasových příkazů.
Zařízení nereaguje na příkazy
  • Zkontrolujte napájení přijímače.
  • Verify wiring connections to the gate/garage door opener.
  • Ensure the device is online and has a stable WiFi connection.
  • If using a remote, check its battery and programming.

7. Záruka a podpora

The product comes with a 1-year warranty from the date of purchase. For any technical assistance, troubleshooting, or warranty claims, please contact the seller or manufacturer directly. Please have your purchase details and model number (SMG-8112) ready when contacting support.

8. Uživatelské tipy


Scimagic-RC SMG-8112 Smart Garage Gate Control Receiver: Remote & Tuya App Programming Guide

Scimagic-RC SMG-8112 Smart Garage Gate Control Receiver: Remote & Tuya App Programming Guide

1:21 • 1280×720 • návod
Univerzální přijímač chytrého spínače Scimagic-RC SMG-8112: Aplikace Tuya a nastavení dálkového ovládání s plovoucím kódem 433 MHz

Univerzální přijímač chytrého spínače Scimagic-RC SMG-8112: Aplikace Tuya a nastavení dálkového ovládání s plovoucím kódem 433 MHz

1:21 • 1280×720 • návod

Související dokumenty - SMG-8112

Předview SMG-8112 Smart Receiver Instruction Manual
Instruction manual for the SMG-8112 smart receiver by Scimagic-RC. Details parameters, setup checklist, user guide for Tuya Smart app, features, and compatibility with 433MHz fixed, learning, and rolling code remote controls.
Předview Scimagic-RC Garage Door Opener Remote Programming Guide
Concise guide to programming the Scimagic-RC garage door opener remote. Follow simple steps using the yellow round button and hand-held remote to pair your device for automatic garage door operation.
Předview Scimagic-RC Garage Door Receiver User Manual - Universal Receiver 300-868MHz
User manual for the Scimagic-RC Garage Door Receiver, a universal receiver supporting 300-868MHz frequencies, rolling and fixed codes, and learning codes for remote control.
Předview Scimagic-RC Universal Remote Control Receiver Product Manual
User manual for the Scimagic-RC Universal Remote Control Receiver, detailing product specifications, programming instructions for transmitters, and jumper cap configurations for different operating modes (Toggle, Latched, Momentary). Includes component labels and manufacturer information.
Předview Scimagic-RC SMG-008 Universal Remote Control Programming Guide
Comprehensive guide to programming the Scimagic-RC SMG-008 universal remote control. Covers fixed code duplication, rolling code duplication, and auto-matching procedures with step-by-step instructions.
Předview Remote Control Manual - Specifications and Usage
Detailed specifications and usage guidelines for the Scimagic-RC SMG-265 remote control, including operating frequency, transmission distance, and compatibility information.