Zavedení
This manual provides comprehensive instructions for the setup, operation, and maintenance of your SOMMER 868MHz Pearl Vibe Twin Status remote control. Please read this manual carefully before using the device to ensure proper functionality and safety.
Main product image of the SOMMER Remote Control.
Specifikace
| Funkce | Popis |
|---|---|
| Frekvence | 868.3 MHz / 868.95 MHz |
| Metoda kódování | Rolling Code |
| Tlačítka | 4 |
| Baterie | V ceně |
| Původ | pevninská Čína |
| Osvědčení | CE |
| Jméno | SOMMER SOMloq2 Remote Control |
Kompatibilní modely
This remote control is compatible with the following SOMMER models:
- SOMMER Pearl
- SOMMER Slider+
- SOMMER Pearl Vibe
- SOMMER Slider Vibe
- SOMMER Pearl Twin
- SOMMER Pearl Twin+
- SOMMER Pearl Status
- SOMMER TX40-868-4
- SOMMER TX55-868-4
- SOMMER TRX55-868-4
- SOMMER 4018V000
- SOMMER 4019V000
Important: Access to your receiver/opener is required for programming. Please ensure you have access before purchase.
Note: Models 4019V656, 4018V094, and 4018V656 are NOT compatible.
Nastavení a programování
Follow these steps to program your new SOMMER remote control to your garage door or gate operator:
- Activate Programming Mode on the Garage Door Operator:
First, you need to switch the radio receiver of the garage door operator to programming mode. To do this, open the housing and press the programming button (often labeled 'Radio button') on the control unit of the garage door operator. Depending on the model, the control unit is located in the motor carriage or within the control unit housing. When in programming mode, a red LED light will illuminate. - Select Radio Channel on the Garage Door Operator:
Press the 'Radio button' repeatedly to cycle through and select the required radio channel on the garage door operator. If no transmission command is received within approximately 30 seconds of pressing the Radio button, the radio receiver will automatically switch back to normal operating mode. - CH1: Pulse mode (OPEN/STOP/CLOSE)
- CH2: Funkce částečného otevření nebo osvětlení
- CH3: Definováno OTEVŘENO
- CH4: Definováno ZAVŘÍT
- Program the Button on the Handheld Transmitter:
Press and hold the desired button on your new handheld transmitter until the previously selected LED for the radio channel on the operator blinks and then goes out. This indicates that the handheld transmitter has successfully transferred the radio code to the radio receiver and is now programmed.
You can repeat these steps to program other handheld transmitters to the same radio receiver. Handheld transmitters with Somloq2 can be programmed on either a Somloq Rollingcode receiver or a SOMloq2 receiver. However, mixed operation of the Somloq and SOMloq2 radio systems on one button is not permitted.
Diagram illustrating the radio channels on the garage door operator control unit.
Visual guide for the programming process, showing the remote interacting with the circuit board.
Video demonstrating how to program a SOMMER handheld transmitter (e.g., Pearl, Pearl Vibe, Pearl Status, Pearl Twin, Slider+, Slider Vibe) to a SOMMER garage door operator with SOMloq2.
Návod k obsluze
Once programmed, operate your garage door or gate by pressing the corresponding button on the remote control:
- Button programmed to CH1: Initiates pulse mode (OPEN/STOP/CLOSE) for the door/gate.
- Button programmed to CH2: Activates partial opening or lighting function.
- Button programmed to CH3: Commands a defined OPEN action.
- Button programmed to CH4: Commands a defined CLOSE action.
Údržba
Pro zajištění dlouhé životnosti a optimálního výkonu vašeho dálkového ovladače:
- Udržujte dálkový ovladač suchý a čistý. Nevystavujte jej vlhkosti nebo extrémním teplotám.
- Replace the battery when the transmission range decreases or the LED indicator on the remote control becomes dim. The remote control includes a battery.
- Do not attempt to open or repair the remote control yourself, as this may void the warranty.
Odstraňování problémů
Pokud váš dálkový ovladač nefunguje podle očekávání, zvažte následující:
- Dálkové ovládání nereaguje: Check if the battery needs replacement. Ensure you are within the operating range of the receiver.
- Problémy s programováním: Verify that the garage door operator is in programming mode and that you are selecting the correct radio channel. Ensure the remote control model is compatible (refer to the 'Compatible Models' section).
- Nekompatibilita: This remote is not compatible with SOMMER models 4019V656, 4018V094, and 4018V656.
Pokud problémy přetrvávají i po provedení těchto kroků, kontaktujte prosím zákaznickou podporu.
Tipy pro uživatele
Od zákazníků nebyly k dispozici žádné konkrétní tipy pro uživatele ani často kladené otázky.views or Q&A for this product at this time. Always ensure clear line of sight between the remote and the receiver for best performance, and keep the remote away from strong electromagnetic interference.
Záruka a podpora
This product typically comes with a 1-year warranty from the store. For warranty claims, technical support, or further assistance, please contact the seller directly through your purchase platform.
