Electric Scooter Safe Lights RGB LED Strip Lights User Manual

1. Úvod

Thank you for choosing the Mikenoon RGB LED Strip Lights. This product is designed to enhance visibility and safety for electric scooters, bikes, and skateboards during night riding. Its vibrant RGB lighting not only adds a stylish touch but also serves as a crucial warning light for other road users. Please read this manual carefully before installation and use to ensure proper function and safety.

2. Bezpečnostní upozornění

• Nepoužívejte tento výrobek v blízkosti ohně.
• If there is a knot in the LED strip during use, please do not pull it hard.
• Výrobek bez povolení nerozebírejte.
• Pokud tento výrobek delší dobu nepoužíváte, vypněte prosím napájení.
• Do not connect the rope light to the power supply while it is in the packing or wound onto a reel.
• Lanové světlo nepoužívejte, když je zakryté nebo zapuštěné do povrchu.
• Please use a standard safe power supply to power the product.

3. Informace o produktu

The Mikenoon RGB LED Strip Lights are designed for durability and high visibility. The light strips are coated with protective resin for enhanced longevity.

Klíčové vlastnosti:

• Typ LED: RGB 5050 LED Strip Lights
• Zdroj napájení: Battery box (requires 4 * AA Batteries, not included)
• Délka: 2 * 0.5m LED strips
• Počet LED: 15 lights per 0.5m strip
• Aplikace: Suitable for Electric Scooters, Bikes, Skateboards, and similar personal mobility devices.

4. Nastavení a instalace

Follow these steps to properly install your RGB LED Strip Lights:

1. Připravte povrch: Ensure the surface where you intend to apply the LED strips (e.g., scooter deck, bike frame) is clean, dry, and free of dust or grease.
2. Naneste lepidlo: Use the provided upgrade stickers (adhesive) to secure the LED strips. Peel off the backing and carefully press the strips onto the desired location.
3. Připevnění LED pásků: Firmly press the LED strips along the chosen path.
4. Adjust Length (Optional): If the strips are too long, you can cut them at designated cut marks (usually indicated by a scissor icon) to fit your device.
5. Vložte baterie: Open the battery box and insert 4 AA batteries (not included), ensuring correct polarity.
6. Připojení komponent: Connect the LED strips to the controller, and then connect the controller to the battery box. Ensure the arrows on the connectors align for proper functionality.
7. Bezpečný bateriový box: Place the battery box in the provided bag and secure it to your scooter or bike using the bag's attachment mechanism.

5. Návod k obsluze

The LED strip lights are controlled by a simple 3-key controller:

• MODE/DEMO Button: Press this button to cycle through different dynamic lighting modes.
• Tlačítko SPEED:
  • In dynamic mode: Press to adjust the speed of the lighting effects.
  • In static mode: Press to adjust the brightness of the static color.
  • Dlouhé stisknutí (2 sekundy): Press and hold this button for 2 seconds to turn the lights ON or OFF.
• BAREVNÉ tlačítko: Press this button to change the static color of the LED strips.

Vizuální demonstrace:

6. Údržba

• Čištění: Gently wipe the LED strips with a soft, damp hadříkem k odstranění nečistot. Vyhněte se používání agresivních chemikálií nebo abrazivních materiálů.
• Bateriový box: Ensure the battery box remains dry. If it gets wet, open it, remove the batteries, and allow it to dry completely before reinserting batteries.
• Výměna baterie: Replace all 4 AA batteries when the lights dim or stop working. Do not mix old and new batteries.
• Skladování: When not in use for extended periods, remove the batteries from the battery box and store the product in a cool, dry place.

7. Řešení problémů

• Světla se nerozsvěcují:
  • Check if the 4 AA batteries are correctly installed and have sufficient charge.
  • Ensure all connections (strips to controller, controller to battery box) are secure and arrow-to-arrow alignment is correct.
  • Long press the SPEED button for 2 seconds to turn the lights on.
• Světla blikají nebo jsou tlumená:
  • Vyměňte baterie AA za nové.
  • Zkontrolujte uvolněné spoje.
• Lights not changing mode or color:
  • Ensure the controller buttons are being pressed firmly and correctly.
  • Check for any damage to the controller or its wiring.

8. Specifikace

9. Uživatelské tipy

• Využití baterie: The LED strip lights are powered by 4 AA batteries (not included). They are not rechargeable via a USB port or other charging methods. Ensure you have fresh AA batteries for optimal performance and to avoid unexpected power loss during night rides.
• Viditelnost: While these lights significantly improve visibility, always exercise caution and adhere to local traffic laws when riding at night. Consider combining with other safety gear.
• Aplikace: The flexible design allows for creative placement on various personal mobility devices. Experiment with different positions to find the most effective and aesthetically pleasing setup for your scooter, bike, or skateboard.

10. Záruka a podpora

S jakýmikoli dotazy týkajícími se produktu, technické podpory nebo reklamací se prosím obraťte přímo na prodejce prostřednictvím vaší nákupní platformy. Pro rychlejší pomoc mějte po ruce údaje o objednávce.

For detailed instructions and further information, please refer to the official user manual PDF: Uživatelská příručka (PDF)