YUER 25x30W LED Matrix Stage Osvětlení

Zavedení

This manual provides essential information for the safe and efficient operation of your YUER 25x30W LED Matrix Stage Lighting. Please read these instructions carefully before installation and use, and retain them for future reference.

Specifikace produktu

Rozměry: 48 cm (šířka) x 48 cm (výška) x 4.5 cm (hloubka)

Bezpečnostní informace

• Vždy připojujte k uzemněné zásuvce.
• Zajistěte správné větrání, aby nedošlo k přehřátí.
• Nepoužívejte přístroj, pokud je napájecí kabel poškozený.
• Vyhněte se přímému vystavení očí světelnému zdroji.
• Uchovávejte mimo dosah hořlavých materiálů.
• Údržbu nebo opravy by měl provádět pouze kvalifikovaný personál.

Nastavení

1. Vybalení a kontrola: Carefully remove the lighting unit from its packaging. Inspect for any damage during transit. Report any damage to the supplier immediately.
2. Montáž: The unit features an adjustable stand for self-contained placement. Ensure the unit is placed on a stable, level surface or securely mounted using appropriate clamps and safety cables (not included) if suspended.
3. Připojení napájení: Connect the power cable to the unit and then to a suitable AC100-240V, 50/60HZ grounded power outlet.
4. DMX připojení (volitelné): For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the lighting unit. If linking multiple units, connect from the DMX OUT of the first unit to the DMX IN of the next, and so on.

Návod k obsluze

1. Zapnutí: Connect the unit to power. The digital display on the rear panel will illuminate.
2. Výběr režimu: Use the buttons on the rear control panel to navigate through different operating modes (e.g., DMX mode, Auto mode, Sound-activated mode). Refer to the display for current mode.
3. DMX ovládání: If using DMX, set the DMX address using the control panel. The unit supports various DMX channel modes (02/04/06/09/100/102/104) for different levels of control, including single point control for individual LEDs.
4. Stmívání a stroboskop: In manual or DMX mode, adjust the dimmer from 0-100% for brightness control. The strobe function allows for adjustable flash rates from 0-25 flashes per second.
5. Míchání barev: The RGBW 4in1 LEDs allow for a wide spectrum of colors. In DMX mode, individual RGBW values can be controlled to create custom colors and wash effects.

Údržba

• Čištění: Regularly clean the lenses and exterior with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the unit is powered off and unplugged before cleaning.
• Větrání: Keep ventilation openings clear of dust and debris to ensure proper airflow and prevent overheating.
• Skladování: When not in use, store the unit in a dry, dust-free environment, preferably in its original packaging or a protective case.
• Kontrola kabelů: Periodically check power and DMX cables for any signs of wear or damage. Replace damaged cables immediately.

Odstraňování problémů

• Bez napájení:
  • Check if the power cable is securely connected to both the unit and the power outlet.
  • Zkontrolujte, zda je elektrická zásuvka funkční.
  • Zkontrolujte napájecí kabel, zda není poškozen.
• Žádný světelný výkon:
  • Ensure the unit is powered on and in an active mode.
  • If in DMX mode, check DMX signal and controller settings.
  • Verify dimmer settings are not at 0%.
• DMX Control Issues:
  • Check DMX cable connections and ensure they are 3-pin or 5-pin XLR as required.
  • Verify the DMX address on the unit matches the address set on your controller.
  • Ensure the DMX channel mode selected on the unit matches your controller's programming.
  • Use a DMX terminator on the last unit in a DMX chain.
• Přehřívání:
  • Zajistěte dostatečné větrání kolem jednotky.
  • Clean any dust or debris from the cooling fans and vents.
  • Neblokujte vstupy nebo výstupy vzduchu.

Tipy pro uživatele

• Experiment with different DMX channel modes to find the best balance between control granularity and channel usage for your setup.
• Utilize the RGBW mixing capabilities to create unique color palettes for various events.
• For dynamic effects, synchronize multiple units using DMX to create impressive matrix patterns.
• Always test your lighting setup in a controlled environment before a live event.

Záruka a podpora

This product comes with a manufacturer's quality warranty, typically ranging from 1 to 3 years. For any quality issues or technical support, please contact your seller or the manufacturer directly. Provide your purchase details and a clear description of the issue for prompt assistance.