Baseus Bullet An On-board Magnetic Car Dashboard Holder

1. Úvod

The Baseus Bullet An On-board Magnetic Car Dashboard Holder (SUYZD-01) is a compact and robust accessory designed to securely hold your smartphone in your vehicle or on any flat surface. Crafted from high-quality aluminum alloy, it offers exceptional durability and a sleek aesthetic. Featuring four powerful magnets and a 360-degree rotation capability, this holder ensures a firm grip and optimal viewing angles for your device.

2. Obsah balení

Zaškrtněte prosím políčko u následujících položek:

• 1 x Baseus Bullet An On-board Holder
• 2 x Metal Plates (various sizes, one with a leather cover)
• 2 x Protective Films for Device Housing
• 1 x Spare 3M Mounting Tape

3. Specifikace

4. Pokyny k nastavení

Follow these steps to properly install and prepare your magnetic car holder:

1. Choose an Installation Surface: Select a clean, flat surface for mounting the holder. This can be your car's dashboard, windshield, headliner, or even a desk or wall at home. Ensure the surface is free of dust, grease, and moisture.
2. Prepare the Holder: Peel off the protective film from the 3M VHB adhesive on the base of the holder.
3. Připevněte držák: Firmly press the holder onto the chosen surface for at least 30 seconds. Allow the adhesive to cure for a few hours (ideally 24 hours) before attaching your phone to ensure maximum adhesion.
4. Připravte si telefon:
   • Option A (Directly on Phone/Case): Apply one of the provided protective films to the back of your phone or phone case where you intend to place the metal plate. This film helps protect the surface from adhesive residue.
   • Option B (Inside Phone Case): Place a metal plate between your phone and its case. Ensure the case is thin enough for the magnetic connection to be strong.
5. Připevněte kovovou desku: Peel off the adhesive backing from one of the metal plates and firmly attach it to the protective film on your phone/case, or place it inside your phone case as described above.
6. Consider Wireless Charging: If your phone supports wireless (Qi) charging, ensure the metal plate is positioned so it does not cover the wireless charging receiver. The receiver is typically located in the middle of the smartphone. You can test the optimal placement by temporarily holding the metal plate at the top or bottom of your device and checking if wireless charging still functions before permanently sticking it.

5. Návod k obsluze

Using your Baseus Bullet Magnetic Car Dashboard Holder is straightforward:

1. Připojte svůj telefon: Once the holder is securely mounted and the metal plate is attached to your phone/case, simply bring your smartphone close to the magnetic head of the holder. The four strong magnets will automatically attract and hold your device firmly in place.
2. Upravit Viewúhel: The holder features a ball joint that allows for full 360-degree rotation. Gently adjust your phone to achieve the perfect viewing angle, whether portrait or landscape, without obstructing your visibility while driving.

6. Údržba

To ensure the longevity and optimal performance of your Baseus Bullet holder:

• Čištění: Wipe the holder periodically with a soft, dry cloth to remove dust and fingerprints. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish.
• Péče o lepidlo: If you need to re-mount the holder, ensure the new surface is clean and dry. Use the provided spare 3M mounting tape or a similar high-quality adhesive for secure re-installation.
• Magnetic Plates: Ensure the metal plates on your phone or case remain clean and free of debris to maintain a strong magnetic connection.

7. Řešení problémů

• Slabé magnetické držení: Ensure the metal plate is correctly positioned on your phone or case and that there are no thick obstructions (like a very thick phone case) between the plate and the holder's magnetic surface.
• Interference with Wireless Charging: If your phone's wireless charging is affected, reposition the metal plate on your phone/case. The metal plate should not cover the wireless charging receiver, which is typically in the center of the phone.
• Holder Detaches from Surface: Ensure the installation surface was clean and dry before application. Allow sufficient curing time (24 hours) for the adhesive. If the issue persists, use the spare 3M mounting tape or a stronger adhesive.
• Rušení signálu: The magnetic properties of this holder are designed not to affect mobile network operation, GPS signals, or internet connectivity. If you experience such issues, verify they are not caused by other factors.

8. Uživatelské tipy

Od zákazníka nebyly k dispozici žádné konkrétní tipy pro uživatele.views or Q&A for this product at the time of manual creation. However, general best practices include:

• Always ensure the mounting surface is thoroughly cleaned and dried before applying the adhesive.
• For optimal adhesion, allow the 3M VHB tape to cure for 24 hours before placing your phone on the holder.
• Experiment with the placement of the metal plate on your phone or case to find the strongest magnetic hold and to avoid interference with wireless charging.

9. Záruka a podpora

This Baseus Bullet An On-board Magnetic Car Dashboard Holder (SUYZD-01) comes with a Záruka 12 měsíců od data nákupu. Uschovejte si prosím doklad o koupi pro případné reklamace.

For technical support, warranty inquiries, or further assistance, please contact your retailer or the official Baseus customer service channels.

About Baseus: Baseus is a brand committed to creating practical and user-centric accessories for mobile devices. Their philosophy, encapsulated in "Base on use" (primarily utility) and "Base on user" (first of all, the user), drives them to produce high-quality, functional, and innovative products.