Zavedení
This manual provides essential information for the safe operation, maintenance, and troubleshooting of your Hyper Tough 20V Max Brushless 5/16-inch Cordless Router Kit. Please read and understand all instructions before using the tool to ensure safe and efficient performance. This powerful cordless router is designed for precision woodworking tasks, offering versatility and ease of use for both professional and DIY users.
Bezpečnostní informace
Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool. Wear appropriate personal protective equipment, including eye protection, hearing protection, and a dust mask. Disconnect the battery pack from the tool before making any adjustments, changing accessories, or storing the tool.
Obsah balení
Při vybalení ověřte, zda jsou všechny položky přítomny:
- Hyper Tough 20V Max Brushless Cordless Router
- 4.0 Ah lithium-iontová baterie
- Nabíječka baterií
- Wrench for bit installation
- Router Bits (assortment)
- Kleština
- Nástavec pro sběr prachu
- Edge Guide Attachment
- Návod k použití
Komponenty skončilyview
Familiarize yourself with the main parts of your router:
- Pouzdro motoru: Contains the brushless motor.
- Báze: Clear base for visibility during operation.
- Kleština: Holds the router bit securely.
- Mechanismus nastavení hloubky: Allows precise control over cutting depth.
- Ovládání rychlosti: Adjusts the motor RPM.
- Vypínač: Vypínač zapnuto/vypnuto.
- LED pracovní světlo: Osvětluje pracovní prostor.
- Port baterie: For attaching the 20V Max Lithium-Ion battery.
Nastavení
1. Nabíjení a instalace baterie
- Ensure the battery is fully charged before first use. Connect the charger to a power outlet and insert the battery pack. The charger indicator light will show charging status.
- Once charged, slide the battery pack into the battery port on the router until it clicks into place.
2. Instalace bitu
- Ensure the router is switched off and the battery is removed.
- Povolte matici kleštiny pomocí dodaného klíče.
- Insert the desired router bit into the collet, ensuring at least 3/4 of the shank is seated.
- Pevně utáhněte matici kleštiny klíčem. Nepřetahujte ji.
3. Nastavení hloubky
- Umístěte frézku na rovný povrch tak, aby se ho vrták dotýkal.
- Uvolněte knoflík pro nastavení hloubky.
- Adjust the router body up or down until the desired cutting depth is achieved, using the depth scale for reference.
- Pevně utáhněte knoflík pro nastavení hloubky.
4. Připevnění příslušenství
Nástavec pro odsávání prachu: Slide the dust collection attachment onto the router base. Connect a vacuum hose for efficient dust extraction.
Edge Guide Attachment: Attach the edge guide to the router base as per its design. This helps maintain a consistent distance from the edge of your workpiece.
Návod k obsluze
1. Zapnutí/vypnutí
To turn the router ON, press the power button. To turn it OFF, press the power button again. Always ensure a firm grip on the tool before starting.
2. Regulace rychlosti
The router features a 6-setting speed control dial. Rotate the dial to select the appropriate speed for your material and bit type. Lower speeds are generally used for larger bits, harder materials, or when more control is needed. Higher speeds are suitable for smaller bits and softer materials.
3. Techniky směrování
Always make test cuts on scrap material before routing your final workpiece. Feed the router into the material at a consistent, moderate pace. Avoid forcing the tool, as this can lead to poor cut quality and potential kickback. Always route against the rotation of the bit for optimal control and safety.
Údržba
1. Čištění
Regularly clean the router, especially the collet area and base, to prevent sawdust buildup. Use a soft brush or compressed air. Do not use solvents or harsh chemicals.
2. Péče o udidlo
Inspect router bits before each use for sharpness and damage. Dull or damaged bits can cause kickback and poor cut quality. Replace worn bits promptly. Store bits in a protective case to prevent damage.
3. Péče o baterie
Store battery packs in a cool, dry place away from direct sunlight. Do not store fully discharged batteries for extended periods. Follow the manufacturer's guidelines for charging and discharging to maximize battery life.
4. Skladování
When not in use, store the router and its accessories in a dry, secure location out of reach of children. Ensure the battery is removed from the tool before storage.
Odstraňování problémů
- Router se nespustí: Check if the battery is fully charged and properly installed. Ensure the power button is pressed correctly.
- Poor cut quality/burning wood: The router bit may be dull or damaged. Replace the bit. The feed rate might be too slow, or the speed setting too high for the material. Adjust accordingly.
- Nadměrné vibrace: Ensure the router bit is properly installed and tightened in the collet. Check for damaged bits.
- Baterie se nenabíjí: Verify the charger is properly plugged into a working outlet and the battery is correctly seated in the charger. Check for damage to the battery or charger.
Specifikace
| Funkce | Specifikace |
|---|---|
| svtage | 20V Max |
| Typ motoru | Bezkartáčový |
| Velikost kleštiny | 5/16 palce |
| Rychlost bez zatížení | Až 3,000 XNUMX ot./min |
| Nastavení rychlosti | 6-setting dial |
| Typ baterie | Lithium-Ion 4.0 Ah |
| Hmotnost (pouze nástroj) | 3.3 liber |
| Další funkce | Built-in LED work light, Cordless design |
Tipy pro uživatele
- For intricate work, consider practicing on scrap wood to get a feel for the router's movement and the bit's cutting action.
- Obrobek vždy pevně zajistěte pomocíamps to prevent movement during routing.
- When routing edges, ensure the router base is fully supported on the workpiece to prevent tipping.
- Use the dust collection attachment whenever possible to keep your workspace clean and improve visibility.
- Match the router bit type to the specific task and material for best results and to prolong bit life.
Záruka a podpora
For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Hyper Tough webUschovejte si doklad o koupi pro případné reklamace.
