VGR V-285

Uživatelská příručka profesionálního akumulátorového zastřihovače vlasů VGR V-285

Model: V-285

1. Konec produktuview

The VGR V-285 is a professional cordless hair clipper designed for efficient and precise hair cutting. It features a high-speed motor, durable blade, and convenient LED display.

Obsah balení:

  • 1x Hair Clipper (V-285)
  • Kabel nabíjení 1x USB
  • 6x Cutting Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm)
  • 1x čisticí kartáček
  • 1x Návod k použití
VGR Hair Clipper V-285/285T with accessories and packaging
VGR Hair Clipper V-285/285T models with included accessories and packaging.
VGR Hair Clipper V-285 with various guide combs, USB cable, and cleaning brush
The VGR V-285 hair clipper shown with its full set of guide combs, USB charging cable, and cleaning brush.
VGR Hair Clipper V-285 highlighting USB charging, 2000mAh Lithium battery, Taper Lever, and LED Display
Key features of the VGR V-285: USB charging, 2000mAh Lithium battery, Taper Lever for length adjustment, and an LED display.
Videoukázka s ukázkou produktuasing the VGR V-285 hair clipper's design, power, and functionality.

2. Důležité bezpečnostní informace

Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.

  • Keep the device and its cord out of reach of children under 3 years old.
  • Keep away from children unless supervised by an adult.
  • Nepoužívejte tento výrobek k jiným účelům, než ke kterým je určen.
  • Inspect the product before each use; do not use if damaged.
  • Follow installation and operation guidelines to avoid injury.

3. Nastavení

Před prvním použitím:

  1. Odstraňte ze zařízení všechny ochranné fólie.

Nabíjení zařízení:

  1. Connect the provided USB cable to a certified 5V power adapter (not included).
  2. Plug the other end of the USB cable into the charging port on the clipper.
  3. LED displej bude indikovat stav nabíjení.
Diagram showing USB charging, 2.5 hours charging time, and 150 minutes running time
The VGR V-285 supports USB charging, with a full charge taking approximately 2.5 hours for 150 minutes of running time.

4. Provoz

  1. **Power On/Off:** Press and hold the power button for 3 seconds to turn on or turn off the device.
  2. **Change Modes:** Short press the power button to change modes (if applicable, refer to LED display for indication).
  3. **Adjust Cutting Length:** Use the taper lever on the side of the clipper to adjust the cutting length from 0.8mm to 2.0mm.
  4. **Attach Guide Combs:** Select the desired guide comb (1.5mm, 3mm, 4.5mm, 6mm, 10mm, or 13mm) and securely attach it to the clipper blade for longer cutting lengths.
Illustration of the taper lever adjustment from 0.8mm to 2.0mm
The taper lever allows for precise adjustment of cutting length between 0.8mm and 2.0mm.
Image showing the 6 guide combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm)
The VGR V-285 comes with 6 guide combs for various hair lengths: 1.5mm, 3mm, 4.5mm, 6mm, 10mm, and 13mm.

5. Údržba

Po použití:

  • Vypněte zařízení.
  • Use the provided cleaning brush to remove any hair clippings from the blade and housing.
  • Store the device in a dry place, away from children.
  • Note: Due to air transportation restrictions, oil bottles are not included in the package. However, some lubricant is applied to the cutter head during manufacturing to keep the blade lubricated.

6. Specifikace

Funkce Specifikace
Název produktu Zastřihovač vlasů
Model V-285
Baterie 2000 mAh lithiová baterie
Jmenovitý vstup 5V, 1A
Doba nabíjení 2.5 hodin
Working Time on Full Charge 150 minut
Typ motoru Vysokootáčkový motor
Range of Speeds 7500-9000 RPM / min
Materiál čepele Powder Metallurgy Blade
Materiál produktu ABS
Čistá metoda Brush Cleanup
svtage Globální univerzální (100–240 V)
Jmenovitý výkon 5 W
Product specifications table for VGR V-285 hair clipper
Detailed product specifications for the VGR V-285 hair clipper.
Close-up of the ceramic and powder metallurgic blade
Detailní záběr view of the sharp ceramic and powder metallurgic blade, designed for smooth and durable cutting.
Vnitřní view of the high-speed motor (7500-9000 RPM)
Illustration of the high-speed motor, operating between 7500-9000 RPM for powerful performance.

7. Řešení problémů

No specific troubleshooting steps are provided in the product documentation. If you encounter issues, please ensure the device is fully charged and cleaned. For persistent problems, contact customer support.

8. Uživatelské tipy

  • **Motor Performance:** The VGR V-285 features a high-speed motor (7500-9000 RPM) for efficient cutting. While the documentation doesn't specify 'brushless', its high performance is designed for professional-grade results.
  • **Power Compatibility:** The clipper is designed for global universal voltage (100-240V), making it suitable for use in various regions.

9. Záruka a podpora

Záruka:

All VGR products come with a 12-month warranty.

Informace o výrobci:

Výrobce: Ningbo Woji Electric Appliance Co., Ltd.
Adresa: CN-CN-CN-No. 656, Kaifa East Road, Zhouxiang Town, Cixi City, Ningbo, Zhejiang, 49-21312066043

Autorizovaný zástupce EU:

Zástupce: Jorge Wilson
Adresa: CASTELLANA 9144, 28046 Madrid
Kontakt: compliance.gavimosa@outlook.com, 34-688185858

Informace o shodě:

This product complies with electrical safety, electromagnetic compatibility, and environmental compliance standards. Conformity markings (e.g., CE) and related documentation are available.

Poprodejní servis:

If the item is damaged during shipping, please contact the seller first and ensure the item remains in its original condition. The seller will review your situation and provide a solution accordingly.

Dokumenty - VGR – V-285
žádné relevantní dokumenty