1. Úvod
The INKBIRD IIC-400-WIFI Smart Indoor Sprinkler Controller is designed to provide intelligent and efficient watering for your garden or lawn. With Wi-Fi connectivity, you can control and monitor your irrigation system remotely via a smartphone application. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your device.

2. What You Will Get
Upon unboxing your INKBIRD IIC-400-WIFI Smart Sprinkler Controller, you should find the following items:
- Ochranný čelní panel
- Smart Sprinkler Controller Unit
- 3x Screws with Anchors for mounting
- Napájecí adaptér
- Šroubovák
- 4x Threaded Wiring Connectors
3. Nástroje, které budete potřebovat
Before beginning the installation, ensure you have the following tools and access:
- 2.4GHz Wi-Fi Access
- Smartphone or Tablet (iOS 13/Android 7.1 or later)
- Šroubovák (součástí balení)
- Kladivo
- Elektrická vrtačka
4. Specifikace
4.1. Elektrické specifikace
| Parametr | Hodnota |
|---|---|
| Vstupní adaptér | US - AC120V 60Hz AU - AC230~240V 50Hz EU - AC230V 50Hz UK - AC240V 50Hz |
| Výstup adaptéru | AC24V 1000mA |
| Vstup regulátoru | AC24V 1000mA |
| Zónový výstup | Kompatibilní s regulačním ventilem AC24V |
| Master/Pump Valve Output | AC 24V |
4.2. App Installation Requirements
- Zařízení kompatibilní s iOS nebo Androidem (iOS 13/Android 7.1 a novější)
- Signál bezdrátové sítě 2.4 GHz dostupný v místě instalace
- Podpora bezpečnostních režimů WEP/WPA/WPA2/WPA2 PSK(AES)
4.3. Rozměry produktu
- Controller Size: 6.11inch*4.67inch*1.45inch / 155.2mm*118.5mm*36.9mm
- Hmotnost produktu: 224 g / 7.9 oz
5. Schéma produktu
The INKBIRD IIC-400-WIFI controller features a clear layout for easy identification of components and wiring terminals.

5.1. Kontrolka LED
- Zone 1~4 indicator lights: Stays on when watering is in progress; Flashes when watering is paused; Flashes in turn when soaking is in progress. Flashes simultaneously when no schedules are running; All off when the controller shuts down.
- All indicator lights: Always on and the buzzer beeps once per second to indicate that the device time has been reset. Wi-Fi needs to be re-paired to calibrate the device time.
- Delay indicator light: Stays on when rain, freezing weather, or manual skips are detected; Schedules with these features enabled will be delayed.
- Wi-Fi indicator light: Flashes when in pairing mode; Stays on when connected and online.
5.2. Provozní tlačítka
- Tlačítko Wi-Fi: Stisknutím a podržením po dobu 2 sekund vstoupíte do režimu párování.
- Tlačítko SET: Used for settings adjustments.
- Start/Skip Button: Press and hold for 2 seconds to turn the controller on/off.
5.3. Wiring Terminals
The controller features clearly labeled terminals for various connections:
- C (běžné): For common wires.
- M (Master Valve/Pump Start Relay): For master valve or pump start relay wires.
- 1, 2, 3, 4 (Zone Outputs): For individual zone wires.
- S (Rain Sensor): For rain sensor wires.
- 24 V stř. For 24V AC power connections.
- PWR IN: Port napájení.
6. Kroky instalace
Before installation, ensure the device can connect to Wi-Fi without issues.
6.1. Step 1: Download the APP
Hledat “INKBIRD” in your device's App Store (iOS) or Google Play (Android) to download and install the application. Create an account once the app is installed.
Alternatively, you can scan the QR code below to download the app:

6.2. Step 2: Connect to Wi-Fi
- Plug the device into a power socket. The LED light will fully illuminate for one second.
- After 5 seconds, the Wi-Fi indicator light will flash, indicating that the device has entered Wi-Fi connection state. If it does not flash, press and hold the Wi-Fi button for two seconds to reset the Wi-Fi connection.
- Open the INKBIRD app, click “+” in the top right corner, and follow the in-app instructions to complete the Wi-Fi connection. Note that this controller supports 2.4GHz Wi-Fi networks only.
- Once successfully connected, the Wi-Fi indicator on the controller will remain on.
6.3. Step 3: Remove Your Old Controller
- First, test your existing sprinkler system to ensure all sprinklers are working correctly.
- Label each wire from your old controller using the provided label stickers to avoid confusion during re-installation.
6.4. Step 4: Mark Screw Locations
- Ensure the distance between the new controller and the power socket is less than 6 feet (1.8 meters).
- Use the mounting template (if provided, or measure the controller) to mark the installation location on the wall.
- Drill holes at the marked locations using an electric drill.
- Insert the screw anchors into the drilled holes using a hammer.
6.5. Step 5: Install Your New Controller
- Secure the top screw, leaving enough space between the screw head and the wall for the controller to hang.
- Hang the new controller onto the top screw.
- Secure the controller with two additional screws at the bottom.

6.6. Step 6: Wire Connection
Insert the labeled wires into the appropriate terminals on the new controller.
- Common Wires (C): Insert common wires (usually labeled 'C') into any of the 'C' terminals.
- Master Valve / Pump Start Relay (M): If you have a master valve or pump start relay (wires usually labeled 'M' or 'Pump'), wire it into the 'M' terminal. Poznámka: The pump should never be wired directly to the controller; doing so will damage the controller and void your warranty.
- Zone Wires (1~4): Insert the wires corresponding to your landscape's zones into terminals 1 through 4.
- Rain Sensor (S) (Optional): If you are using a rain sensor (wires usually labeled 'S'), wire it into the 'S' and '24-' terminals. The '24-' terminal is equivalent to the 'C' terminal. Remember to enable the rain sensor in the app.
- Power-in (P): Insert the power connector upwards into the power jack, then plug the adapter into a power outlet. Poznámka: Do not turn on the power before all wires are securely connected. If any wire is damaged, cut off power to the controller and replace the damaged wire to avoid hazards.
7. Operation (Function Description)
The INKBIRD app provides comprehensive control over your sprinkler system.

7.1. Automatic/Manual Watering
- Automatický režim: Makes daily watering visible, efficient, and scientific.
- Ruční zalévání: Allows you to provide extra water as needed. The default manual watering time on the device is 180 minutes.

7.2. Smart Irrigation Features
- Přeskočit déšť: Intelligently skips watering schedules during rainy weather to prevent overwatering.
- Sezónní úprava: Adjusts watering amounts for hot summers or cold winters with a single click.

7.3. Managing Watering Schedules and History
Aplikace vám to umožňuje view upcoming watering plans and review past watering activities.

7.4. Funkce paměti pro vypnutí
The controller has a built-in time chip that automatically runs the time without needing spare batteries. It supports non-volatile storage, saving all settings even if power is cut off. The timer will automatically resume once power is restored.
7.5. OTA Function
The device supports Over-The-Air (OTA) updates, ensuring lifetime satisfactory use with continuous improvements.
8. Průvodce odstraňováním problémů
If you encounter issues with Wi-Fi connection or irrigation facilities, refer to the table below for common problems and solutions. For further assistance, please contact support@inkbird.com.
| Problém | Možné důvody a řešení |
|---|---|
| Problém s připojením Wi-Fi |
|
| Problém se zařízením |
|
| Setting Issue (How to enter pairing mode/reset Wi-Fi?) | Press and hold the Wi-Fi button for 2 seconds; the Wi-Fi icon will flash. |
| Buzzer beeps once per second, and Zone 1-4 indicator lights are always on? | The clock chip's time has reset due to power disconnection for about 10 days. Reconnect the controller via Wi-Fi using the INKBIRD app to calibrate the clock time. |
9. Údržba
To ensure the longevity and optimal performance of your INKBIRD IIC-400-WIFI Smart Sprinkler Controller, follow these simple maintenance guidelines:
- Udržujte ovladač čistý a bez prachu a nečistot. K čištění používejte měkký, suchý hadřík.
- Ensure the controller is installed in a dry location, as it is not waterproof.
- Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná a bez koroze nebo poškození.
- Pravidelně kontrolujte aktualizace aplikací, abyste mohli využívat nové funkce a vylepšení výkonu.
10. Uživatelské tipy
Žádné konkrétní tipy pro uživatele od reviewK tomuto produktu byly poskytnuty otázky a odpovědi.
11. Záruka a podpora
11.1. Záruka
This item carries a 2-year warranty against defects in components or workmanship. During this period, products found to be defective will be repaired or replaced without charge, at the discretion of INKBIRD.
11.2. Zákaznický servis
For any problems or questions regarding the use of your INKBIRD IIC-400-WIFI Smart Sprinkler Controller, please feel free to contact us at podpora@inkbird.com. We are committed to providing the best possible assistance.
Podrobný návod k použití ve formátu PDF je také k dispozici ke stažení: INKBIRD IIC-400-WIFI User Manual (PDF)
12. Požadavek FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- Toto zařízení nesmí způsobovat škodlivé rušení.
- Toto zařízení musí akceptovat jakékoli přijaté rušení, včetně rušení, které může způsobit nežádoucí provoz.
Poznámka: Toto zařízení bylo testováno a bylo zjištěno, že vyhovuje limitům pro digitální zařízení třídy B v souladu s částí 15 pravidel FCC. Tyto limity jsou navrženy tak, aby poskytovaly přiměřenou ochranu před škodlivým rušením při domácí instalaci. Toto zařízení generuje, používá a může vyzařovat vysokofrekvenční energii, a pokud není nainstalováno a používáno v souladu s pokyny, může způsobovat škodlivé rušení rádiové komunikace. Nelze však zaručit, že při konkrétní instalaci k rušení nedojde. Pokud toto zařízení způsobuje škodlivé rušení rozhlasového nebo televizního příjmu, což lze zjistit vypnutím a zapnutím zařízení, doporučujeme uživateli, aby se pokusil napravit rušení jedním nebo více z následujících opatření:
- Přeorientujte nebo přemístěte přijímací anténu.
- Zvětšete vzdálenost mezi zařízením a přijímačem.
- Připojte zařízení do zásuvky v jiném okruhu, než ke kterému je připojen přijímač.
- Požádejte o pomoc prodejce nebo zkušeného rádiového/TV technika.
Toto zařízení vyhovuje limitům FCC pro vystavení radiaci stanoveným pro nekontrolované prostředí. Toto zařízení by mělo být instalováno a provozováno s minimální vzdáleností 20 cm mezi radiátorem a vaším tělem. Tento vysílač nesmí být umístěn nebo provozován ve spojení s jinou anténou nebo vysílačem.





