Uživatelská příručka monitoru srdečního tepu GEOID HS500

1. Konec produktuview

The GEOID HS500 is a high-performance heart rate strap sensor designed for athletes and fitness enthusiasts. It provides accurate heart rate data and supports both Bluetooth 4.2 and ANT+ connectivity, making it compatible with a wide range of cycling computers, smartwatches, and fitness apps, including devices from Wahoo and Garmin.

The HS500 features a lightweight design, comfortable adjustable strap, and an IP67 waterproof rating, ensuring reliable performance during various activities.

2. Obsah balení

Před použitím se prosím ujistěte, že balení obsahuje všechny položky:

• Snímač tepové frekvence (HS500) x 1
• Baterie CR2032 x 1 (předinstalovaná v senzoru)
• Adjustable Elastic Strap x 1

3. Průvodce nastavením

3.1 Nošení monitoru srdečního tepu

1. Align the heart rate module with the chest strap.
2. Kindly wet the electrode area of the chest strap with a few drops of water. This improves conductivity and ensures accurate readings.
3. Adjust the length of the chest strap so it fits comfortably under your chest muscle. It should be snug but not restrictive.
4. Adjust the sensor to the center of the heart with the GEOID logo facing up. Ensure the electrode is close to the skin.

3.2 Připojení k vašemu zařízení

The HS500 supports both Bluetooth 4.2 and ANT+ for wireless connection.

1. Turn on Bluetooth on your phone or ensure your cycling computer/device has ANT+ enabled.
2. Důležité: Do NOT search for or pair the sensor through your phone's system Bluetooth settings. Instead, open your preferred cycling or fitness app (e.g., Wahoo Fitness, Garmin Connect, Zwift) and connect the sensor directly within the app's sensor settings.
3. Once connected, check that the app displays heart rate data normally.

3.3 Indikátor LED

The HS500 is integrated with an LED indicator light to show its working status.

• A red light indicates that the sensor is ready to use and actively transmitting data.

4. Návod k obsluze

Once the HS500 heart rate monitor is properly worn and connected to your device/app, it will automatically begin transmitting your heart rate data. You can monitor your heart rate in real-time through your connected device's display.

• Monitorování v reálném čase: View your current heart rate (in beats per minute, bpm) on your cycling computer, smartwatch, or smartphone app.
• Sledování aktivity: Use the heart rate data to track your workout intensity, calorie burn, and training zones for activities like cycling, gym workouts, football, tennis, running, and basketball.
• Automatické zapnutí/vypnutí: The sensor typically activates when it detects a heart rate signal and deactivates when removed from the body or when no heart rate is detected for a period.

5. Údržba

5.1 Čištění

• After each use, detach the sensor module from the strap.
• Rinse the elastic strap with clean water and hang it to dry. Do not machine wash or tumble dry.
• Wipe the sensor module with a damp tkanina. Nepoužívejte agresivní chemikálie nebo abrazivní čisticí prostředky.

5.2 Výměna baterie

The HS500 uses one CR2032 coin cell battery. When the battery is low, your connected device or app may indicate a low battery warning, or the sensor may stop transmitting data reliably.

1. Locate the battery compartment on the back of the sensor module.
2. Use a coin or small tool to twist open the battery cover counter-clockwise.
3. Vyjměte starou baterii CR2032.
4. Vložte novou baterii CR2032 kladnou (+) stranou nahoru.
5. Replace the battery cover and twist clockwise to secure it tightly, ensuring the waterproof seal is intact.

5.3 Hydroizolace

The HS500 has an IP67 waterproof rating, meaning it is protected from dust and can withstand immersion in water up to 1 meter for 30 minutes. It is splashproof and suitable for use in rain or during sweaty workouts, but it is not recommended for swimming or prolonged underwater use.

6. Řešení problémů

• Žádné údaje o tepové frekvenci:
  • Ensure the electrodes on the strap are wet before wearing.
  • Check that the strap is worn correctly and snugly against your skin, centered on your chest.
  • Verify the sensor module is securely attached to the strap.
  • Check the battery level. Replace the CR2032 battery if necessary.
  • Ensure Bluetooth/ANT+ is enabled on your receiving device.
  • Try reconnecting the sensor within your fitness app.
• Problémy s připojením:
  • Remember to connect via your fitness app, not your phone's system Bluetooth settings.
  • Ensure no other devices are actively connected to the sensor via Bluetooth/ANT+.
  • Move closer to your receiving device to rule out range issues.
  • Restart your phone/cycling computer and the fitness app.
• Nepřesná čtení:
  • Re-wet the electrodes and adjust the strap for better skin contact.
  • Ensure the sensor is positioned correctly on your chest.
  • Vyhněte se silným zdrojům elektromagnetického rušení.
• LED indikátor nesvítí:
  • Zkontrolujte baterii.
  • Ensure the sensor is properly attached to the strap and making contact with your skin (it may only activate when a heart rate is detected).

7. Specifikace

8. Uživatelské tipy

• Pre-wetting is Key: Always remember to wet the electrode pads on the strap before wearing. This significantly improves signal transmission and accuracy, especially at the beginning of your workout.
• Přiléhavý střih: Ensure the chest strap is snug enough to maintain constant skin contact but not so tight that it restricts breathing or movement. A good fit prevents chafing and ensures consistent readings.
• Kompatibilita aplikací: While the HS500 supports standard Bluetooth and ANT+ protocols, some apps may require specific pairing procedures or have unique features. Refer to your chosen fitness app's instructions for optimal integration.
• Životnost baterie: To maximize battery life, detach the sensor module from the strap after each use. This ensures the sensor powers down completely and prevents accidental activation.

9. Záruka a podpora

Pro informace o záruce, technickou podporu nebo servisní dotazy se prosím obraťte přímo na prodejce nebo výrobce. Uschovejte si doklad o koupi pro případ reklamace.