Zavedení
Thank you for choosing the CYCLAMI Bicycle Front Light. This manual provides detailed instructions for the safe and efficient use of your BR500 or BR500T bicycle light. Please read this manual thoroughly before use and keep it for future reference.
Obsah balení
- Bicycle light (BR500 or BR500T)
- Držák popruhu
- Nabíjecí kabel TYPE-C
- GoPro Mount adapter
- Uživatelská příručka (tento dokument)
Specifikace
| Parametr | Detail |
|---|---|
| Lumen | 500 Lm (MAX) |
| Světelné režimy | Vysoká / Střední / Nízká / Bliká |
| Baterie | 18650 rechargeable lithium battery 2000mAh |
| Vytrvalost | Approx. 3~7H (laboratory data) |
| Materiál | Hliníková slitina |
| Hodnocení voděodolnosti | IPX6 |
| Velikost | 106 x 33 x 27 mm |
| Hmotnost | ~106 g |
Illumination & Endurance Overview
| Režim osvětlení | Vytrvalost | Rozsah osvětlení | Lumen |
|---|---|---|---|
| Vysoký | 3 hod | 200 M | MAX 500Lm |
| Střední | 3.5 hod | 150 M | 200 lm |
| Nízký | 7 hod | 100 M | 100 lm |
| Flashing (Emergency) | / | 200 M | 500 lm |
| Flashing (Warning) | / | 200 M | 500 lm |
Nastavení a instalace
The CYCLAMI Bicycle Front Light offers versatile mounting options to suit your preference and bicycle setup. Both BR500 and BR500T models include strap-on brackets.
General Installation (BR500 - Positive Mounting)
- Secure the strap bracket to your bicycle's handlebars. Ensure it is tight and stable.
- Slide the bicycle light onto the bracket until it clicks securely into place.
Suspension Mounting (BR500T - Downward-facing)
The BR500T model supports suspension mounting, often used with extension brackets (sold separately) for a downward-facing orientation, which can be integrated with cycle computers.
Návod k obsluze
The bicycle light features a single button for power and mode selection.
- Zapnutí/vypnutí: Press and hold the power button to activate or deactivate the light.
- Přepínací režimy: Once powered on, click the button to cycle through the standard lighting modes:
- Vysoké světlo
- Střední světlo
- Nízké osvětlení
- Bliká
- Emergency Gear: Double-click the button to switch to the highlight mode. In this mode, the brightness will not change with the power level. Click the button once to exit the emergency gear.
- Alert/Warning Mode: Press the button three times in quick succession to switch to the blinking (alert) mode.
Baterie a nabíjení
Indikátor stavu baterie
The power indicator light on the device provides a visual cue for the remaining battery level:
| Barva světla indikátoru | Zbývající síla |
|---|---|
| Zelená (plná) | 50 % - 100 % |
| Zelená (bliká) | 10 % - 50 % |
| Červená (blikající) | 0 % - 10 % |
Pokyny pro nabíjení
- Use the provided TYPE-C charging cable to charge the device.
- During charging, the indicator light will flash red.
- Po plném nabití se kontrolka rozsvítí trvale zeleně.
- Ensure the rubber plug at the charging port is fully embedded before use to maintain IPX6 waterproof rating.
- Přibližná doba nabíjení je 2.5 hodiny.
Údržba
- Keep the light clean from dirt and debris. Use a soft, damp hadřík na čištění.
- Ensure the Type-C charging port's rubber plug is always securely closed when not charging to maintain its IPX6 waterproof rating.
- Pokud světlo delší dobu nepoužíváte, skladujte ho na chladném a suchém místě.
- Avoid exposing the light to extreme temperatures.
Odstraňování problémů
If you encounter any issues with your CYCLAMI Bicycle Front Light, please refer to the following common solutions:
- Světlo se nerozsvítí: Ensure the battery is charged. Connect the light to a power source using the Type-C cable and check if the charging indicator activates.
- Světelné režimy se nemění: Ensure you are clicking the button correctly. A single click cycles modes, a double-click activates emergency highlight, and three quick clicks activate alert mode.
- Reduced brightness or short endurance: The battery might be low. Recharge the light fully. Battery performance can also be affected by extreme cold.
- Light head getting hot: Je normální, že lamp head to dissipate heat during prolonged use, especially in high light mode. This is a normal phenomenon and not a defect.
Pokud problém přetrvává, kontaktujte prosím zákaznickou podporu.
Tipy pro uživatele
- For optimal visibility and safety, use the High Light mode in dimly lit environments and the Flashing mode for daytime visibility or as a warning.
- Regularly check the mounting bracket to ensure the light is securely attached before each ride.
- Always fully charge the light before long rides to maximize endurance.
Bezpečnostní informace
- Bezpečnost očí: Do not shine the light directly into your eyes or the eyes of others. The high intensity of the light can cause temporary vision impairment or discomfort.
- Teplo: Jáamp head will dissipate heat and may become warm during prolonged use. This is normal. Avoid touching the lamp head directly when it is hot.
- První použití: For normal operation, please charge the bicycle light fully before its first use.
- Vodotěsný: The light has an IPX6 waterproof rating, meaning it is protected against powerful water jets. However, it is not designed for submersion. Ensure the charging port cover is sealed.
Záruka a podpora
CYCLAMI products come with a 1-year after-sales warranty od data nákupu.
This warranty does not cover human-induced damage or damage caused by incorrect use of the product.
For maintenance requests beyond the 1-year warranty period, charges for replacement parts and transport costs will apply.
Should you encounter any product issues or require support, please contact us via:
- E-mail: cyclami@outlook.com
- Oficiální Webmísto: www.cyclami.com
Adresa výrobce: 7/F, No.2 Industrial Daxia, No.16 Jingle Road, Xiangzhou District, Zhuhai, Guangdong, China
