Attack Shark V100 Pro

Uživatelská příručka mechanické klávesnice ATK V100 Pro

Model: V100 Pro

1. Úvod

The ATK V100 Pro is a high-performance mechanical keyboard designed for gamers and professionals seeking versatility and responsiveness. Featuring three-mode connectivity (2.4G wireless, Bluetooth 5.0, and wired USB-C), a durable CNC aluminum alloy upper cover, and hot-swappable mechanical switches, it offers a customizable and low-latency experience. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your ATK V100 Pro keyboard.

ATK V100 Pro Mechanical Keyboard Overview
Figure 1: ATK V100 Pro Mechanical Keyboard Overview

2. Průvodce nastavením

2.1 Obsah balení

Než začnete, ujistěte se, že máte k dispozici všechny položky:

  • ATK V100 Pro Mechanical Keyboard
  • Kabel USB-C na USB-A
  • 2.4G bezdrátový přijímač
  • Keycap Puller / Switch Puller (may be combined)
  • Uživatelská příručka (tento dokument)

2.2 Nabíjení klávesnice

The ATK V100 Pro is equipped with an 8000mAh battery for extended wireless use. To charge, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a powered USB port on your computer or a wall adapter. The keyboard's indicator light will show charging status.

8000mAh Super Large Battery
Figure 2: Super large 8000mAh battery for long endurance.

2.3 Připojení klávesnice

The ATK V100 Pro supports three connection modes:

Three-mode connection options: 2.4G, Bluetooth, Wired
Figure 3: Three-mode connection switch and USB-C port.

2.3.1 Drátový režim

  1. Připojte konec kabelu s konektorem USB-C ke klávesnici a konec s konektorem USB-A k počítači.
  2. Ensure the mode switch on the keyboard is set to 'Wired' (usually indicated by a cable icon or 'USB').
  3. Klávesnice bude automaticky rozpoznána vaším operačním systémem.

2.3.2 Bezdrátový režim 2.4G

  1. Vložte 2.4G USB přijímač do volného USB portu v počítači.
  2. Set the mode switch on the keyboard to '2.4G' (usually indicated by a wireless icon).
  3. The keyboard should connect automatically. If not, press and hold the Fn key + the 2.4G key (refer to keyboard layout for specific key) to initiate pairing.

2.3.3 Režim Bluetooth

  1. Set the mode switch on the keyboard to 'Bluetooth' (usually indicated by a Bluetooth icon or 'BT').
  2. V počítači nebo zařízení přejděte do nastavení Bluetooth a vyhledejte nová zařízení.
  3. The keyboard should appear as 'ATK V100 Pro' or similar. Select it to pair.
  4. You may need to press and hold Fn + a specific Bluetooth key (e.g., Fn+1, Fn+2, Fn+3) to enter pairing mode or switch between paired Bluetooth devices.

2.4 Instalace softwaru (ATK HUB)

For advanced customization of lighting effects, key remapping, and macros, download and install the ATK HUB software from the official ATK website (refer to the 'Warranty & Support' section for the website address). This software allows one-stop management of multiple devices.

ATK HUB Software Interface for Keyboard Settings
Figure 4: ATK HUB software interface for light and key settings.

3. Návod k obsluze

3.1 Základní funkce kláves

The ATK V100 Pro features a 101-key layout. All standard alphanumeric and function keys operate as expected. The keyboard also boasts 1ms ultra-low latency for a responsive experience, especially in gaming.

1ms Ultra-low Latency Feature
Figure 5: Highlighting the 1ms ultra-low latency for competitive performance.

3.2 Multimediální a funkční klávesy

Use the 'Fn' key in combination with other keys (typically F1-F12 or dedicated multimedia keys) to access multimedia controls (play/pause, volume up/down, mute) and other system functions. Refer to the keycap legends for specific combinations.

3.3 Backlight Control (ARGB)

The keyboard features customizable ARGB lighting with 16 million colors and various effects. You can adjust brightness, change lighting modes, and select colors directly from the keyboard using Fn key combinations, or through the ATK HUB software for more precise control.

ARGB Lamp Bead Features and Independent Control Chip
Figure 6: ARGB lamp beads with independent control chip for vibrant lighting effects.

3.4 Přepínače vyměnitelné za provozu

The ATK V100 Pro supports full key hot-swapping, allowing you to change mechanical switches without soldering. This enables personalized DIY experiences and easy replacement of faulty switches.

Full Key Hot Plug Feature with Hot-Swappable Switches
Figure 7: Illustration of the full key hot-swappable feature.

3.5 Ergonomický design

The keyboard is designed with two-stage foot support, allowing you to adjust the typing angle for improved comfort and reduced fatigue during long sessions.

Ergonomic Design with Two-Stage Foot Support
Figure 8: Ergonomic design featuring two-stage adjustable foot support.

4. Údržba

4.1 Čištění

  • Generální úklid: K otření povrchu klávesnice použijte měkký, suchý hadřík. V případě odolných nečistot použijte lehceamp Lze použít hadřík s jemným mýdlem a ujistit se, že se na klávesnici nedostane žádná tekutina.
  • Čištění kláves: Use the provided keycap puller to remove keycaps. Clean them with a mild detergent and water, then dry thoroughly before reattaching.
  • Odstranění prachu: Pomocí stlačeného vzduchu vyfoukněte prach a nečistoty z prostoru mezi klávesami a spínači.

4.2 Výměna spínače

Thanks to the hot-swappable design, individual switches can be replaced easily:

  1. Vypněte klávesnici nebo ji odpojte od zařízení.
  2. Use the switch puller tool to carefully grip and pull out the desired switch.
  3. Align the pins of the new switch with the holes on the PCB and gently push it in until it clicks into place. Ensure the pins are not bent.
  4. Vyměňte krytku kláves.

4.3 Péče o baterii

  • Nevystavujte klávesnici extrémním teplotám (horkým ani nízkým).
  • Do not allow the battery to fully discharge frequently, as this can reduce its lifespan.
  • If storing the keyboard for an extended period, charge it to about 50-70% before storage.

5. Řešení problémů

5.1 Keyboard Not Connecting/Responding

  • Kabelový režim: Ujistěte se, že je kabel USB-C bezpečně připojen ke klávesnici i k počítači. Zkuste jiný port USB nebo kabel.
  • 2.4G bezdrátový režim: Ensure the 2.4G receiver is properly inserted and the keyboard is switched to 2.4G mode. Check battery level. Try re-pairing (Fn + 2.4G key).
  • Režim Bluetooth: Ensure Bluetooth is enabled on your device and the keyboard is in Bluetooth mode. Check battery level. Try re-pairing or switching to a different Bluetooth profile (Fn+1/2/3).
  • Všechny režimy: Ensure the keyboard is charged. Restart your computer.

5.2 Klávesy nereagují nebo se píší dvakrát

  • Remove the keycap and check for any debris or obstruction around the switch.
  • If the issue persists, the switch might be faulty. Utilize the hot-swappable feature to replace the problematic switch.

5.3 Problémy s podsvícením

  • Ensure the backlight is turned on and brightness is adjusted using Fn key combinations.
  • Check the ATK HUB software for any conflicting settings or to reset lighting profiles.

5.4 Lag or High Latency

  • In 2.4G or Bluetooth mode, ensure there are no strong interfering signals (e.g., other wireless devices, microwaves) nearby.
  • For critical gaming, consider using the wired connection for the most stable and lowest latency performance.
  • Ujistěte se, že je baterie klávesnice dostatečně nabitá.

6. Specifikace

ATK V100 Pro Model Comparison and Specifications
Figure 9: ATK V100 Pro model comparison and key specifications.
FunkceSpecifikace
Název produktuATK V100 Pro Mechanical Keyboard
Standardní klávesnice101 kláves
Operační stylMechanické
Režim připojeníWired (USB-C), Wireless 2.4G, Bluetooth 5.0
Přepínače Hot SwapAno
Typ podsvíceníMULTICOLOR (ARGB, 16 million colors, lower lamp pozice)
Kapacita baterie8000 XNUMX mAh
Materiál horního krytuCNC hliníková slitina
Latence1 ms Ultra nízká latence
AplikaceStolní počítač, notebook
Jazykangličtina
Původpevninská Čína
OsvědčeníCE
Struktura klávesniceE-sports Gasket (PC Positioning Plate, Sandwich Cotton, IXPE/PET Sound Superior Pad, Silicone Sound Silicone Bottom Pad, PORON PCB, Sound Silencer Shaft Seat Cotton)

6.1 Key Switch Specifications

Key Switch Types and Specifications
Figure 10: Detailed specifications for various key switch types.
Typ přepínačePopisSpouštěcí zdvihCelková mrtviceTlak spouště
Aniya AxisAdvance Linear Axis, Material Pivot Sound HiFi2.0±0.2 mm3.2±0.2 mm40±10gf
Dream Fei AxisLinear mechanical axis, Soft touch, stable and smooth1.8±0.5 mm4.0±0.4 mm54 gf ± 10 gf
Blueberry Ice Cream ShaftLinear axis, Strong rebound bottoms out ahead of schedule1.0±0.4 mm3.5±0.3 mm40±10gf

7. Uživatelské tipy

  • Experimentujte s přepínači: Vezměte si náskoktage of the hot-swappable design to try different switch types that best suit your typing or gaming preferences.
  • Customize RGB Profiles: Use the ATK HUB software to create and save multiple RGB lighting profilepro různé aplikace nebo hry.
  • Udržujte firmware aktualizovaný: Regularly check the official ATK webweb s aktualizacemi firmwaru pro zajištění optimálního výkonu a přístupu k novým funkcím.
  • Optimalizace bezdrátového výkonu: For the best wireless experience, keep the 2.4G receiver close to the keyboard and avoid placing large metal objects between them.

8. Záruka a podpora

For product support, technical assistance, or warranty inquiries, please contact your seller or visit the official ATK website. For services such as product driver download, please visit https://ATK.PRO.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.