1. Úvod
The Anern Hybrid Solar Inverter is a versatile power solution designed for off-grid solar systems. It integrates a pure sine wave inverter, an MPPT solar charge controller, and a battery charger into one compact unit, offering uninterruptible power support. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your inverter.
2. Nastavení a instalace
Before installation, ensure all components are present and undamaged. Installation should be performed by qualified personnel in accordance with local electrical codes.
2.1 Konec produktuview
- LCD displej
- Indikátor stavu
- Indikátor nabíjení
- Indikátor poruchy
- Funkční tlačítka
- Vypínač napájení
- AC vstup
- AC výstup
- FV vstup
- Vstup baterie
- Jistič
- RS-232 communication port / WiFi-port
- Anti-dust kit (Optional)
2.2 Připojení k systému
The inverter is designed to integrate with solar panels, batteries, and utility power to supply electricity to home appliances. Ensure all connections are secure and correctly polarized.
Spojovací body:
- AC vstup: Connect to utility grid or generator (195-253VAC).
- AC výstup: Connect to home appliances.
- 12V DC výstup: Pro nízkoobjemtage DC loads.
- Vstup baterie: Connect to external battery packs (12/24VDC nominal output).
- PV vstup: Connect to solar panels. Maximum PV Array Open Circuit Voltage je 150 V DC.
- Jistič: Pro ochranu.
- RS-232 Communication Port / WiFi-Port: For monitoring and control via Cube WIFI/GPRS and PVguarder APP.
Důležité úvahy:
- Zajistěte správné uzemnění.
- Ověřte správný objemtage and current ratings for all connected components.
- The inverter features a built-in anti-dust kit for harsh environments.
3. Provoz
Once installed, the inverter can be powered on using the power on/off switch. The LCD display and indicator lights provide real-time status information.
3.1 LCD displej a indikátory
- LCD displej: Shows various operational parameters such as input/output voltage, battery status, load percentage a stav nabíjení.
- Indikátor stavu: Indicates the current operational mode.
- Indikátor nabíjení: Shows battery charging activity.
- Indikátor poruchy: Rozsvítí se v případě systémových chyb nebo poruch.
- RGB světlo: Provides visual cues for different working modes.
3.2 Řízení spotřeby
- Priorita solární energie: Solar energy is prioritized and provided directly to the load first, maximizing renewable energy utilization.
- Smart Battery Charging: The inverter incorporates a smart battery charge design to optimize battery lifespan.
- Municipal Electricity Charging: Supports regular charging from municipal electricity when solar power is insufficient or unavailable.
3.3 Monitoring and Communication
- WIFI/GPRS: Communication interface available for iOS and Android devices, allowing remote monitoring and control via the PVguarder APP.
4. Údržba
Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho měniče.
- Čištění: Keep the inverter's exterior clean and free from dust. The built-in anti-dust kit helps in harsh environments, but periodic inspection is recommended.
- Spojení: Periodically check all electrical connections (AC input/output, PV input, battery input) to ensure they are tight and free from corrosion.
- Větrání: Abyste zabránili přehřátí, ujistěte se, že ventilační otvory střídače nejsou zablokované.
- Stav baterie: Monitor battery health and ensure proper charging cycles as per battery manufacturer recommendations.
5. Řešení problémů
If the inverter is not functioning as expected, refer to the fault indicator and the LCD display for error codes or messages. Common issues and their potential solutions are listed below.
- Indikátor poruchy zapnutý: Check the LCD display for specific error codes. Refer to the full product manual (if available) for a comprehensive list of codes and troubleshooting steps.
- Žádný výkon: Verify AC input, battery connection, and solar panel input. Check circuit breakers.
- Baterie se nenabíjí: Ensure solar panels are receiving adequate sunlight and are correctly connected. Check battery health and charging settings.
6. Specifikace
| Funkce | Specifikace |
|---|---|
| Název značky | ANERN |
| Číslo modelu | AN-SCI02-PRO-3.6KW/6.2KW |
| Výstupní výkon | 2KW, 3.2KW (Specific models), 1 - 200 KW (General range) |
| Typ výstupu | SINGL |
| Výstupní frekvence | 50HZ/60HZ |
| Výstupní proud | 140A |
| AC vstup Voltage | 230VAC |
| AC svtage Regulace (Batt. Mode) | 230VAC ± 5% |
| Efficiency (Peak) PV to Inverter | 98 % |
| Průběh | Čistá sinusovka |
| Maximální nabíjecí proud AC | 80A |
| Maximální PV pole Otevřený obvod Voltage | 150V DC |
| Maximální solární nabíjecí proud | 60A |
| Komunikační rozhraní | WIFI |
| Je chytré zařízení | Ano |
| Hmotnost | 8 kg |
| Rozměry balení (D x Š x V) | 42 cm x 30 cm x 12 cm |
| Osvědčení | CE, RoHS |
| Původ | pevninská Čína |
7. Uživatelské tipy
- Grid-Tie/Mixing Functionality: While primarily an off-grid inverter, its hybrid nature and ability to use municipal electricity for charging suggest it can seamlessly switch between power sources. For specific grid-tie or power mixing capabilities, consult the detailed product manual or manufacturer support.
- Vzdálený dohled: Utilize the WIFI communication interface and the PVguarder APP (for iOS and Android) to monitor your system's performance and status remotely. This can help in proactive troubleshooting and optimization.
8. Záruka a podpora
The Anern Hybrid Solar Inverter comes with a 2-letá záruka. For warranty claims, technical support, or further inquiries, please contact your retailer or the manufacturer directly. Ensure you have your product model number and purchase details available.
