Jiuyin 7-Inch Portable Motorcycle Navigation Monitor User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Jiuyin 7-Inch Portable Motorcycle Navigation Monitor. Please read this manual thoroughly before using the device to ensure proper function and safety.

2. Klíčové vlastnosti

• Bezdrátové připojení: Supports Wireless Apple CarPlay and Wireless Android Auto.
• Zrcadlení obrazovky: Compatible with Airplay and Autolink for mobile screen mirroring.
• Zobrazit: 7.0-inch IPS screen with 1024x600P resolution and 800 nits peak brightness for clear visibility in various light conditions.
• Trvanlivost: IPX7 Waterproof level and dust-proof screen, designed for outdoor use.
• Provozní teplota: Functions reliably in temperatures ranging from -20°C to +80°C.
• Skladování: Supports Micro SD card up to 64GB (for DVR recording).
• Bluetooth: Bluetooth 5.0 for seamless audio and communication.
• Volitelné funkce: Dual Recorder (front and rear cameras) and Tire Pressure Monitoring System (TPMS) are available as optional accessories.
• Zabezpečení: Features an anti-theft system with password protection.

3. Obsah balení

Zkontrolujte prosím balení, zda neobsahuje následující položky:

• Jiuyin 7-Inch Portable Motorcycle Navigation Monitor
• Napájecí kabel
• Mounting Brackets (various types may be included)
• Uživatelská příručka (tento dokument)
• Optional: Tire Pressure Sensors (if purchased)
• Optional: Front and Rear Cameras (if purchased)

4. Nastavení a instalace

4.1 Montáž zařízení

Attach the monitor to your motorcycle using the provided mounting brackets. The sunshade can be disassembled if not needed. Ensure the device is securely fastened and does not obstruct your view nebo ovládací prvky.

4.2 Power Installation Guidelines

IMPORTANT: Incorrect power connection can cause short circuits and damage the product. Always use a multimeter to verify voltage před připojením.

1. Power Supply Precaution: The product power supply is NOT allowed to be connected directly to the motorcycle or electric car battery.
2. Connection Principle: Connect the power supply to an engine start or ACC (Accessory) state circuit.
3. svtage Ověření: Before connecting the power cord, use a multimeter to measure the voltage. Ensure it is 12V when the engine is running or in ACC mode, and no voltage when the engine is off or in flameout state.
4. Identifikujte zdroj napájení: Locate the motorbike power fuse box (near the original front end or battery) or a suitable power adapter/adaptor for electric vehicles.
5. Zabezpečené připojení: Ensure all connections are secure and waterproof, especially the safety lock design on the power cable.

4.3 Instalace volitelného příslušenství

• Cameras (if purchased): Install the front and rear cameras in desired locations. Ensure they have a clear view and are securely mounted.
• Tire Pressure Sensors (if purchased): Follow the separate instructions provided with the TPMS kit for installation and pairing.

4.4 Počáteční zapnutí

After successful installation, turn on your motorcycle's ignition. The device should power on. If an anti-theft system is active, you may be prompted to enter a password.

5. Návod k obsluze

5.1 Uživatelské rozhraní Overview

The device features a simple and generous interface design. Navigate through functions like CarPlay, Apps, Auto (Android Auto), TF card, Setup, Bluetooth, and BT Ear (Bluetooth Earphone connection).

5.2 Bezdrátové připojení CarPlay / Android Auto

Connect your iPhone or Android phone via wireless Bluetooth. Both wireless CarPlay and Android Auto connections operate via WiFi.

1. On the device, select 'CarPlay' or 'Auto'.
2. On your phone, search for and pair with the device's Bluetooth name (e.g., "CarBt ***").
3. Once paired via Bluetooth, the device will establish a WiFi connection for CarPlay/Android Auto functionality.
4. You can now use mobile apps, make/answer calls, and utilize voice control commands directly from the monitor.

5.3 Připojení Bluetooth helmy

1. Krok 1: Search and pair with "CarBt ***" on your phone. Both wireless CarPlay & Android connections are working by WiFi.
2. Krok 2: Go to Settings -> System -> Device MIC. Set to OFF if you have a Bluetooth Helmet.
3. Krok 3: Use your mobile phone to connect Bluetooth earphones (the screen and phone are displayed synchronously at this time).

5.4 GPS navigace

The device uses your phone's GPS via wireless Apple CarPlay or Android Auto to provide navigation. Access your preferred navigation apps (e.g., Google Maps) directly from the monitor's interface.

5.5 Přehrávání médií

Enjoy music and audiobooks through your connected phone. The device supports simultaneous connection of two Bluetooth devices, allowing you to connect both your phone and a Bluetooth helmet/earphones for audio output.

5.6 Screen Mirroring (Airplay & Autolink)

The monitor supports Airplay for iPhones and Autolink for Android devices, allowing you to mirror your phone's screen wirelessly.

5.7 Dual Recorder Operation (Optional)

If you have purchased the optional dual recorder cameras, the device can record footage from both front and rear cameras simultaneously. The DVR Recorder Card Slot is located on the device for Micro SD card insertion (max 64GB).

6. Údržba

6.1 Voděodolná péče

The device features an IPX7 waterproof design. While durable, it is important to avoid staining the camera lens with oil, alcohol, tar cleaner, and other solvents to prevent damage to the waterproof layer. This product is strictly prohibited from being cleaned with a high-pressure water gun or immersed in water to prevent water ingress into the body.

6.2 Čištění

Clean the screen and body with a soft, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.

6.3 Provozní prostředí

The device is designed to operate between -20°C and +80°C. Avoid prolonged exposure to temperatures outside this range to ensure optimal performance and longevity.

7. Řešení problémů

7.1 Zařízení se nezapne

• Ensure the power cord is correctly installed and connected to an ACC or engine start circuit.
• Ověřte svtage at the connection point using a multimeter (should be 12V when ignition is on).
• Zkontrolujte, zda nejsou uvolněná spojení nebo poškozená kabeláž.
• Ensure the power supply is not directly connected to the battery, which can cause short circuits.

7.2 Problémy s bezdrátovým připojením CarPlay/Android Auto

• Ujistěte se, že je v telefonu i zařízení povoleno rozhraní Bluetooth.
• Confirm your phone is paired with the device via Bluetooth.
• Check your phone's WiFi settings to ensure it's connected to the device's WiFi network (established after Bluetooth pairing).
• Restart both your phone and the navigation monitor.

7.3 Screen Responsiveness Issues

• Ensure the screen is clean and free from dirt or moisture.
• Restartujte zařízení.

8. Specifikace

9. Uživatelské tipy

• For optimal visibility, ensure the screen is clean and free from glare. The anti-glare HD screen is designed to be visible in various light conditions.
• Always ensure your phone's Bluetooth and WiFi are active for seamless CarPlay/Android Auto connection.
• Regularly check power connections for security, especially after riding on rough terrain.
• If using optional cameras, periodically check the Micro SD card for available storage and ensure recordings are functioning correctly.

10. Záruka a podpora

For any questions regarding installation, operation, or troubleshooting not covered in this manual, please contact customer service for assistance. Keep your purchase receipt for warranty purposes.