Příručky+

HP Slice G2 DM TPC-I021

HP Slice G2 DM Desktop Motherboard User Manual

Model: TPC-I021, Part Numbers: 942325-601, 853243-001, 853241-001

1. Úvod

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HP Slice G2 DM Desktop Motherboard. This motherboard is designed for compact desktop systems, offering robust performance and connectivity for various applications. Please read this manual thoroughly before proceeding with installation or operation.

2. Specifikace

Below are the key technical specifications for the HP Slice G2 DM Motherboard:

FunkceSpecifikace
Název modeluTPC-I021 DM
HP Part Numbers942325-601, 853243-001, 853241-001
Typ procesoruXeon 3065 (compatible)
Hlavní frekvence procesoru1.83 GHz (compatible)
Max Processors1
L2 Cache Capacity16 MB (compatible)
Maximální kapacita paměti16 GB
Typ pamětiSODIMM (as indicated by images)
Typ rozhraníSATA (for storage)
Vysoce znepokojená chemikálieŽádný
Baterie je součástí dodávkyNo (CMOS battery may be present but not included as main power source)
Původpevninská Čína

3. Instalační příručka

Před zahájením instalace se ujistěte, že máte čisté a statické pracovní prostředí. Doporučuje se nosit antistatický náramek, aby nedošlo k poškození součástí.

3.1 Základní deskaview

Nahoru view of HP Slice G2 DM Motherboard
Obrázek 3.1: Nahoře view of the HP Slice G2 DM Motherboard, showing the CPU socket, various I/O ports (USB, Ethernet, DisplayPort), and other integrated components.
Dno view of HP Slice G2 DM Motherboard
Obrázek 3.2: Spodní část view of the HP Slice G2 DM Motherboard, highlighting the SODIMM RAM slots and heatsink mounting points.

3.2 Instalace procesoru

  1. Locate the CPU socket on the motherboard (refer to Figure 3.1).
  2. Carefully lift the load lever and open the CPU socket cover.
  3. Align the processor with the socket, ensuring the gold triangle or notch on the CPU matches the corresponding mark on the socket. Do not force the CPU into place.
  4. Lower the CPU gently into the socket.
  5. Zavřete kryt zásuvky a zatlačte páku na nabíjení dolů, dokud nezacvakne na místo.
  6. Apply thermal paste to the top of the CPU and install the CPU cooler/heatsink according to its manufacturer's instructions.

3.3 Instalace paměti (RAM)

This motherboard uses SODIMM memory modules.

Close-up of RAM slots on HP Slice G2 DM Motherboard
Obrázek 3.3: Detail view showing the SODIMM RAM slots and part number label (HP P/N: 853243-001 TPC-I021-DM).
  1. Locate the SODIMM slots (refer to Figure 3.2 and 3.3).
  2. Gently push open the clips at both ends of the memory slot.
  3. Align the notch on the SODIMM module with the key in the memory slot.
  4. Insert the module at a 45-degree angle and push down firmly until the clips snap into place, securing the module.

3.4 Instalace úložného zařízení (SATA)

Connect your SATA storage devices (HDD/SSD) to the SATA ports on the motherboard using SATA data cables. Ensure the power cable from your power supply is also connected to the storage device.

3.5 Připojení periferií a napájení

  • Connect the main power connector from your power supply to the motherboard.
  • Connect any necessary auxiliary power connectors (e.g., CPU power).
  • Connect USB devices, Ethernet cable, and display cables (DisplayPort, HDMI if available) to the appropriate I/O ports.
  • Connect front panel headers (power button, reset button, USB, audio) to the corresponding pins on the motherboard. Refer to your system chassis manual for pin assignments.

4. Provoz

4.1 První spuštění

After all components are installed and connected, power on your system. The system should perform a Power-On Self-Test (POST). If successful, the system will attempt to boot from your installed storage device.

4.2 Nastavení BIOSu/UEFI

To enter the BIOS/UEFI setup utility, press the designated key (commonly F2, F10, Del, or Esc) during the POST sequence. Consult your system's documentation for the exact key. In the BIOS/UEFI, you can configure boot order, system time, and other hardware settings.

5. Údržba

  • Odstranění prachu: Regularly clean dust from the motherboard and system components using compressed air. Ensure the system is powered off and unplugged before cleaning.
  • Kontroly součástí: Pravidelně kontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná.
  • Aktualizace BIOSu: Zkontrolujte podporu HP website for BIOS/firmware updates for your specific system model (HP Slice G2 DM) to ensure optimal performance and compatibility.

6. Řešení problémů

  • Bez napájení: Ensure all power cables (main ATX, CPU power) are securely connected to the motherboard and power supply. Verify the power supply is switched on.
  • Bez displeje: Check that the monitor is connected to the correct display output on the motherboard or graphics card. Reseat RAM modules and any expansion cards.
  • Systém se nespustí: Listen for beep codes (if applicable) which can indicate specific hardware issues. Try booting with only essential components (CPU, one RAM stick, power supply) to isolate the problem.
  • Součást nebyla detekována: Ensure the component (e.g., RAM, storage drive) is correctly seated and connected. Check BIOS/UEFI settings to see if it's recognized.

7. Uživatelské tipy

  • Always handle the motherboard by its edges to avoid touching sensitive components and static discharge.
  • When installing the CPU, ensure proper alignment and do not apply excessive force. The CPU should sit naturally in the socket before the retention arm is closed.
  • For optimal memory performance, install RAM modules in matched pairs if your system supports dual-channel memory.

8. Záruka a podpora

For warranty information and technical support, please refer to the official HP support channels or contact your point of purchase. Keep your purchase receipt as proof of purchase.