1. Úvod
The Urit PH-01 and PH-01A Hemoglobin Meters are advanced Point-of-Care Testing (POCT) instruments designed for rapid and accurate measurement of hemoglobin (HGB) and hematocrit (HCT) levels. Utilizing world-leading technology and a precise siphon method for sample collection, these devices provide reliable results suitable for various clinical and home settings. Key features include fast testing, accurate results, and an optional Bluetooth connectivity for data management.
2. Nastavení
Before using your Urit Hemoglobin Meter, please follow these setup steps:
- Rozbalte komponenty: Carefully unpack the device and all accessories. Ensure all components are present: the PH-01/PH-01A meter, test strips, lancets, and lancing device (if included in your kit).
- Instalace baterie: Open the battery compartment (usually on the back) and insert the required batteries, ensuring correct polarity.
- Příprava lancetového zařízení: Vložte novou lancetu do odběrového zařízení podle jeho specifických pokynů.
- Check Test Strips: Verify that the test strips are within their expiry date and stored correctly in their original vial with the cap tightly closed.
3. Návod k obsluze
Follow these steps to perform a hemoglobin and hematocrit test:
- Zapnutí: Press the power button (usually the center button marked with a power symbol) to turn on the meter.
- Code Check: Ensure the code displayed on the meter matches the code printed on your test strip vial. If they do not match, refer to the test strip instructions for how to adjust the meter's code.
- Připravte Sampten: Clean the finger with an alcohol swab and allow it to air dry. Use the lancing device to obtain a small drop of blood.
- Použít Sampten: Carefully touch the tip of the test strip to the blood sample. The blood will be drawn into the strip automatically via the siphon method. Ensure the sample port is completely filled.
- Insert Strip: Insert the prepared test strip into the meter's test strip port. Ensure it is fully inserted.
- Výsledky čtení: The meter will automatically begin analysis. After a short countdown, your Hemoglobin (HGB) and Hematocrit (HCT) results will be displayed on the screen in the selected units (mmol/L, mg/dL, or g/dL).
- Výsledky záznamů: Note down your results if manual tracking is desired. The meter also stores results in its internal memory (MEM function).
- Vypnout: The meter will typically power off automatically after a period of inactivity. You can also manually turn it off by pressing and holding the power button.
4. Údržba
Proper maintenance ensures the longevity and accuracy of your Urit Hemoglobin Meter:
- Čištění: Wipe the meter's exterior with a soft, slightly damp cloth. Do not immerse the device in water or use harsh chemical cleaning agents, as this can damage the electronics.
- Skladování: Store the meter and test strips in a cool, dry place, away from direct sunlight, moisture, and extreme temperatures. Keep test strip vials tightly closed to prevent contamination and degradation.
- Výměna baterie: Jakmile se na displeji zobrazí indikátor slabé baterie, ihned vyměňte baterie, abyste zajistili nepřetržitý provoz a zabránili ztrátě dat.
- Likvidace: Dispose of used lancets and test strips safely in a sharps container or biohazard waste bin according to local regulations to prevent injury and contamination.
5. Řešení problémů
If you encounter issues with your Urit Hemoglobin Meter, consider the following common troubleshooting steps:
- Kódy chyb: If the meter displays an error code, consult the full user manual (if available) for specific meanings and solutions.
- Nepřesná čtení:
- Ensure the test strip is not expired and is inserted correctly.
- Ověřte, zda je krevample was sufficient and applied correctly to the strip.
- Check that the meter's code matches the code on the test strip vial.
- Ensure the meter and strips are stored within recommended temperature and humidity ranges.
- Měřič se nezapíná: Zkontrolujte instalaci baterie a v případě potřeby baterie vyměňte.
If issues persist after attempting these steps, please contact customer support for further assistance.
6. Specifikace
| Funkce | Specifikace |
|---|---|
| Čísla modelů | PH-01, PH-01A |
| Funkce | Hemoglobin (HGB) and Hematocrit (HCT) testing |
| Metoda měření | Siphon method for quantitative sample |
| Materiál | Plast |
| Původ | pevninská Čína |
| Vysoce znepokojená chemikálie | Žádný |
| Měrné jednotky | mmol/L, mg/dL, g/dL |
| Funkce paměti | Yes (MEM) |
| Konektivita | Bluetooth (volitelné) |
7. Uživatelské tipy
To optimize your experience and ensure accurate readings:
- Always ensure your hands are clean and dry before handling test strips and the meter.
- Check the expiry date on test strips regularly and discard any expired strips.
- For consistent monitoring, try to perform tests at a similar time each day.
- Keep the meter away from strong electromagnetic fields, which could interfere with readings.
8. Záruka a podpora
For technical assistance, warranty inquiries, or any further questions regarding your Urit PH-01 or PH-01A Hemoglobin Meter, please contact our support team:
- Whatsapp: +8615914156617 XNUMX XNUMX XNUMX
- E-mail: surip.leo@hotmail.com
Please have your model number and any relevant purchase information ready when contacting support.
