Thermalright TR-TG Series Computer Power Supply User Manual

1. Úvod

Thank you for choosing the Thermalright TR-TG Series Computer Power Supply. This power supply unit (PSU) is designed to provide stable and efficient power to your computer system, featuring ATX3.0 and PCIe 5.0 compatibility, 80 PLUS Gold certification, and a full modular design for convenient cable management. This manual provides essential information for safe installation, operation, and maintenance of your PSU.

2. Bezpečnostní informace

Please read and follow these safety guidelines carefully to prevent damage to the unit or injury to yourself:

• Před instalací, demontáží nebo čištěním napájecího zdroje vždy odpojte napájecí kabel ze zásuvky.
• Tento napájecí zdroj je určen pouze pro použití v počítačových systémech. Nepoužívejte jej k žádnému jinému účelu.
• Neotevírejte napájecí zdroj casing. Vysoký objemtagUvnitř se nacházejí nečistoty a otevření jednotky zruší platnost záruky.
• Zajistěte správné uzemnění počítačového systému.
• Nepoužívejte napájecí zdroj v prostředí s vysokou vlhkostí nebo extrémními teplotami.
• The power supply features multiple circuit protections (Over Voltage, Low Voltage, Over Power, Short Circuit, High Temperature). Do not attempt to bypass these safety features.

3. Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• Thermalright TR-TG Series Power Supply Unit
• Modular Cable Set (specific cables and quantities may vary by wattage model):
• Motherboard interface (MB 20+4 PIN)
• CPU interface (CPU 4+4 PIN)
• Video card interface (PCI-E 6+2 PIN)
• Video card interface (PCI-E 5.0 12+4 PIN 12VHPWR)
• Hard disk connection (SATA 3+3 PIN)
• PATA Hard disk interface (4PIN)
• 4PATA+SATA hard disk port
• AC napájecí kabel
• Montážní šrouby

4. Konec produktuview

4.1 Klíčové vlastnosti

• ATX3.0 Standard Support: Designed to meet the latest ATX3.0 specifications, supporting up to 200% peak power consumption.
• Připraveno pro PCIe 5.0: Native support for PCIE GEN 5.0 with a 12+4 pin 12VHPWR cable for high-end graphics cards.
• Certifikace 80 PLUS Gold: Achieves over 90% efficiency at 50% load, ensuring stable voltage and high efficiency.
• Plně modulární design: Allows for clean cable management and improved airflow within the chassis.
• Prémiové komponenty: Utilizes all-day system 105°C temperature resistant electrolytic capacitors for stable power supply and long life.
• Inteligentní regulace teploty ventilátoru: Features a 120mm fan with intelligent start-stop technology for quiet operation at low loads and strong cooling under high loads.
• Multiple Circuit Protection: Comprehensive protection against over voltage, nízký objemtage, over power, short circuit, and high temperature.
• Wide Voltage Vstup: Supports 100-240V full voltaga design.

4.2 Fyzické rozměry

The TR-TG series power supplies feature a compact 14CM friendly body design, compatible with a wide range of chassis schemes for convenient wiring.

• Délka: 150 mm
• Šířka: 140 mm
• Height: 86mm ±1mm

5. Specifikace

Specifications may vary slightly between different wattage models (e.g., 650W, 750W, 850W, 1000W, 1200W). The following table provides general specifications, with detailed output for the 1200W model as an example.

5.1 Output Specifications (Example for 1200W Model)

6. Nastavení a instalace

Follow these steps to properly install your Thermalright TR-TG power supply:

6.1 Fyzická instalace

1. Ujistěte se, že je počítač vypnutý a odpojený od zásuvky.
2. Sejměte boční panel skříně počítače.
3. If replacing an old PSU, disconnect all cables from the old unit and remove it from the chassis.
4. Carefully place the Thermalright TR-TG PSU into the designated PSU bay in your chassis. Ensure the fan is oriented correctly for optimal airflow (usually facing down if there's a bottom vent, or up if not).
5. Secure the PSU to the chassis using the provided mounting screws.

6.2 Modulární kabelové připojení

The TR-TG series features a full modular design, allowing you to connect only the cables you need. Refer to the diagrams below for proper connections.

1. Motherboard Connection: Connect the 20+4 pin ATX cable to the corresponding port on the PSU and your motherboard.
2. Výkon CPU: Connect the 4+4 pin EPS/CPU cable(s) to the CPU power port(s) on the PSU and your motherboard.
3. Graphics Card Power (PCIe):
   • For traditional graphics cards, use the 6+2 pin PCIe cables. Connect them to the PSU's CPU/PCIe ports and your graphics card.
   • For PCIe 5.0 compatible graphics cards, use the dedicated 12+4 pin 12VHPWR cable. Connect it to the 12VHPWR port on the PSU and your graphics card. This cable supports up to 600W and eliminates the need for adapters.
4. SATA/PATA Devices: Connect SATA power cables to your SSDs, HDDs, and optical drives. Use PATA cables for older devices if necessary. Connect these cables to the SATA/PATA ports on the PSU.
5. Periferní zařízení: Connect any other necessary peripheral cables (e.g., for fans, RGB controllers) to the appropriate ports.

6.3 Závěrečné kroky

1. Dvakrát zkontrolujte všechna kabelová připojení, abyste se ujistili, že jsou bezpečná.
2. Manage cables neatly to improve airflow and aesthetics.
3. Vyměňte boční panel skříně počítače.
4. Připojte napájecí kabel k napájecímu zdroji a poté do zásuvky ve zdi.
5. Přepněte vypínač na zadní straně zdroje do polohy „ON“.

7. Návod k obsluze

Once installed, operating your Thermalright TR-TG power supply is straightforward:

1. Ensure the PSU's power switch (located on the back of the unit) is in the 'ON' position.
2. Stiskněte tlačítko napájení na skříni počítače pro spuštění systému.
3. The intelligent temperature control fan will operate as needed, remaining quiet during low loads and increasing speed for efficient cooling under heavy loads.
4. To power off your system, use the operating system's shutdown function. For a complete power cut, flip the PSU's power switch to 'OFF' and unplug the AC cord.

8. Údržba

Proper maintenance helps ensure the longevity and optimal performance of your power supply:

• Čištění: Periodically clean the exterior of the PSU and its fan grill to prevent dust buildup. Use compressed air to gently clear dust from the fan blades and internal components (ensure the PSU is unplugged and switched off before cleaning).
• Proud vzduchu: Ensure your computer case has adequate airflow to prevent the PSU from overheating. Keep the area around your computer clear of obstructions.
• Správa kabelů: Regularly check that modular cables are securely connected and not obstructing airflow.

9. Řešení problémů

If you encounter issues with your power supply, try these common troubleshooting steps:

• Bez napájení:
  • Zkontrolujte, zda je napájecí kabel bezpečně zapojený do zdroje napájení i do zásuvky.
  • Ujistěte se, že je vypínač na zadní straně zdroje napájení v poloze „ON“.
  • Verify that the motherboard's 20+4 pin and CPU's 4+4 pin power cables are correctly and firmly connected.
  • Otestujte zásuvku ve zdi pomocí jiného zařízení, abyste se ujistili, že je pod proudem.
• Nestabilita/pády systému:
  • Ensure all modular cables are fully seated in both the PSU and the components.
  • Check for proper ventilation within the computer case to prevent overheating.
  • If using a high-power graphics card, ensure it is connected with the appropriate PCIe power cables, especially the 12VHPWR for PCIe 5.0 cards.
• Hlučnost ventilátoru:
  • The intelligent fan may increase speed under heavy load; this is normal.
  • If the fan is excessively noisy at idle or making unusual sounds, check for dust buildup and clean the fan.

If problems persist after trying these steps, contact Thermalright customer support.

10. Uživatelské tipy

• When building a new PC or upgrading, always calculate your total system wattage requirements to ensure you select a PSU with sufficient headroom.
• Utilize the full modular design to only connect the cables you need. This significantly improves cable management and airflow inside your PC case.
• For graphics cards requiring the 12VHPWR connector, ensure the cable is fully inserted and seated correctly to prevent power delivery issues.
• Consider using cable ties or Velcro straps to organize cables, which can help with both aesthetics and thermal performance.

11. Záruka a podpora

The Thermalright TR-TG Series Power Supply comes with a Pětiletá záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For warranty claims, technical support, or further assistance, please contact your retailer or visit the official Thermalright webstránky s informacemi o zákaznickém servisu.