XTOOL InPlus IP500 Diagnostic Tool User Manual

1. Úvod

The XTOOL InPlus IP500 is an advanced, all-in-one diagnostic scanner designed specifically for Toyota, Lexus, and Scion vehicles. This powerful tool offers comprehensive OE-level full system diagnostics, bi-directional control (active tests), over 19 special reset services, 4-in-1 live data graphing, and automatic VIN scanning. With its user-friendly interface and lifetime free software updates, the IP500 is an essential tool for both professional workshops and DIY enthusiasts seeking efficient and accurate vehicle diagnostics.

2. Nastavení a první použití

2.1. Obsah balení

Než začnete, ujistěte se, že máte v balení všechny položky:

• XTOOL IP500 Tablet
• Main Cable (OBDII connector)
• Nabíjecí kabel
• Seznam balení File
• Rychlá uživatelská příručka

2.2. Připojení zařízení

1. Vyhledejte port OBDII vašeho vozidla, který se obvykle nachází pod palubní deskou na straně řidiče.
2. Connect the main cable to the XTOOL IP500 tablet.
3. Plug the OBDII connector of the main cable into your vehicle's OBDII port.
4. Zapněte zapalování vozidla (vypněte motor).
5. The IP500 tablet will power on automatically. If not, press the power button.

2.3. Initial Software Update

It is recommended to perform a software update upon first use to ensure you have the latest features and vehicle compatibility. Connect the device to a Wi-Fi network and navigate to the 'Update' section on the main menu. Follow the on-screen prompts for a one-click update.

3. Návod k obsluze

3.1. Identifikace vozidla

The IP500 offers multiple methods to identify your vehicle for diagnosis:

• Automatické skenování VIN: Automatically identifies the vehicle and scans all diagnosable systems.
• Ruční zadání VIN: For vehicles not supporting Auto VIN, manually enter the 17-digit VIN.
• Automatický výběr: Select the vehicle manufacturer, and the system will guide you through further selection.
• Manuální výběr: If VIN is not retrievable, manually select vehicle details (make, model, year).

3.2. OE-Level Full Systems Diagnostic

The IP500 can diagnose all available systems in your vehicle, including Engine, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, EPB, Fuel Systems, Transmission modules, and more. Key functions include:

• Čtení/Vymazání kódů: Displays detailed Diagnostic Trouble Codes (DTCs) and allows you to erase them.
• Informace o ECU: Provides detailed information about the Electronic Control Unit.
• Živá data: Retrieves and displays real-time data and parameters from the vehicle's ECU.
• Aktivní test: Accesses vehicle-specific subsystem and component tests.
• Speciální funkce: Performs various component adaptations.

3.3. Obousměrné řízení (aktivní test)

This function allows the IP500 to send commands directly to the vehicle's ECUs to perform active tests on components, helping to quickly pinpoint issues. ExampMezi aktivní testy patří:

• Windows operation
• Sunroof activation
• Wipers control
• Headlight adjustment
• Throttle modulation
• Door Locks operation
• EVAP system tests
• ABS autobleed
• A/C Configuration
• Radiator Fan, Coolant Pump, EGR Valve, Cylinder, Turbocharger tests, and more.

3.4. Plné funkce OBD2

The IP500 provides comprehensive OBD2 functionality for all OBD2-compliant vehicles:

• Čtení živého datového proudu: Displays live ECU/PCM data, graphically plotting functions.
• Čtení kódů: Shows detailed descriptions of Diagnostic Trouble Codes (DTCs).
• Erasing Kódy a reset: Zhasne kontrolku motoru (MIL), vymaže kódy a resetuje monitory.
• Stav připravenosti I/M: Checks if emission-related systems are operating correctly.
• Freeze Frame: Records vehicle conditions when an emission-related fault occurs.
• Test palubního monitoru: Retrieves test results for emission-related powertrain components.
• Test senzoru O2: Umožňuje viewzobrazování výsledků testů monitoru senzoru O2.
• Test součásti: Actuates certain vehicle components via commands from the scanner.
• Přečtěte si informace o vozidle: Zobrazuje VIN, CID a CVN.
• Knihovna vyhledávání DTC: Provides definitions, causes, and maintenance suggestions for OBD2 fault codes.

3.5. Graf živých dat 4 v 1

The device can read and display live vehicle data in graphical format. You can combine up to four individual data streams on one screen for better comparison and analysis, which is crucial for diagnosing intermittent faults and issues that don't trigger DTCs.

4. Údržba a speciální funkce

4.1. Full Reset Functions (19+ Services)

The XTOOL IP500 provides over 19 special service functions for professional-level maintenance and repairs:

• EPB (Electrical Park Brake): Resets brake pads after repairs.
• SAS (snímač úhlu řízení): Clears fault memories, performs reset, and turns off warning light.
• DPF (filtr pevných částic): Odstraňuje pevné částice (PM) z DPF filtru.
• Reset kontrolky oleje: Resets the oil life system and turns off the oil light.
• BMS (Battery Management System): Resets after battery replacement to clear fault information.
• Přeučení škrticí klapky: Resets throttle actuators for smooth idling and acceleration.
• Kódování vstřikovačů: Enters new injector codes into the ECU.
• A/C Relearn: Initializes air conditioning after ECU or actuator replacement.
• Další funkce: Gearbox Match, Suspension, Window Initialization, Seat Calibration, Headlight, Start/Stop Reset, Nox Reset, SRS, EGR Relearn, A/F Settings, TPMS Reset, Crank Sensor Relearn, and more.

Poznámka: Compatibility for special functions varies by vehicle make, model, and year. Please verify compatibility before attempting any service.

4.2. Lifetime Free Software Update

The XTOOL IP500 offers lifetime free software updates via Wi-Fi. Regularly updating your device ensures enhanced compatibility, improved device performance, and access to the latest features and vehicle data. Connect to Wi-Fi and use the 'Update' function on the main menu.

5. Odstraňování problémů a podpora

5.1. DTC Lookup Library

The built-in DTC Lookup Library provides direct definitions for OBD2 fault codes, including fault descriptions, causes, maintenance suggestions, and background knowledge. This feature saves time and helps you understand diagnostic results more effectively.

5.2. Diagnostické zprávy

You can save diagnostic data and generate PDF diagnostic reports directly from the device. These reports can be printed or sent via email, allowing for easy sharing with customers or for record-keeping.

5.3. Remote Technical Support

The XTOOL IP500 is equipped with a remote support module. If you encounter an issue that you cannot resolve, you can request remote assistance from XTOOL engineers. This allows them to remotely access your device and diagnose abnormal vehicle conditions to help solve your problems efficiently.

6. Specifikace

7. Záruka a podpora

The XTOOL InPlus IP500 comes with a 2-letá záruka. For any technical assistance or support, please utilize the remote technical support feature on your device or contact XTOOL's professional customer service directly. Ensure you have your device's S/N and vehicle VIN ready for faster service.

8. Uživatelské tipy

• Kompatibilita vozidla: Always confirm compatibility for specific models and years, especially for advanced functions like TPMS reset or A/C relearn. If unsure, provide your vehicle's Make/Model/Year/VIN to XTOOL support for verification.
• Aktualizace softwaru: Regularly update your device via Wi-Fi to ensure optimal performance and the broadest vehicle coverage, including newer models like the Toyota RAV4 2024.
• Resetování TPMS: The IP500 supports TPMS reset functions. For vehicles like the 2008 Toyota Tundra, ensure the specific TPMS relearn procedure is followed as per the vehicle's service manual or the device's instructions.
• VIN Scan Issues: If Auto VIN scan fails (e.g., for very new or old cars, or non-standard VINs), use the Manual VIN Input or Manual Selection options. You can also report such instances to XTOOL for future database updates.